Abstract:Abstract Water hammer is oscillatory pressure behavior in a wellbore resulting from the inertial effect of flowing fluid being subjected to an abrupt change in velocity. It is commonly observed at the end of large-scale hydraulic fracturing treatments after fluid injection rate is rapidly reduced or terminated. In this paper, factors affecting treatment-related water hammer behavior are disclosed, and field studies are introduced correlating water hammer characteristics to fracture intensity and well productivity. A simulator based on fundamental fluid-mechanics concepts was developed to model water hammer responses for various wellbore configurations and treatment characteristics. Insight from the modeling work was used to develop an optimal process of terminating fluid injection to obtain a consistent, identifiable oscillatory response for evaluating water hammer periodicity, decay rate, and oscillatory patterns. A completion database was engaged in a semi-automated process to evaluate numerous treatments. A data screening method was developed and implemented for enhancing interpretation reliability. Derived water hammer components were correlated to fracture intensity, well productivity and in certain cases, loss of treatment confinement to the intended treatment interval. Using the above process, thousands of hydraulic fracturing treatments were evaluated, and the results of that work are included in this study. The treatments were performed in wells based in Texas, South America, and Canada and completed in low permeability and unconventional reservoirs. The water hammer decay rate was determined to be a reliable indication of the system friction (friction in the wellbore and hydraulic fracture network) that drains energy from the water hammer pulse. In unconventional reservoirs characterized by small differences in the minimum and maximum horizontal stresses, high system friction correlated positively with fracture intensity/complexity and well performance. Results were constrained with instantaneous shut-in pressure (ISIP) and pressure falloff measurements to identify instances of direct communication with previously treated offset wellbores. The resulting analyses provided: – identification of enhanced-permeability intervals – indications of hydraulic fracture geometry – assessment of treatment modifications intended to enhance fracture complexity – identification of loss of treatment confinement to the intended interval – location of associated points of failure in the wellbore Topics covered in the paper include: Introduction Joukowsky Equation Period and Boundary Conditions Review of Prior Work on Water Hammer Analysis Shut-In Pressure Data, Analysis, and Model Data collection frequency Data issues and requirements Water Hammer Analytical Method Water Hammer Model Effects on Water hammer signature Fluid properties Step-down rate change and duration Perforation friction Applications Identification of Boundary Condition Identification of Treatment Stage Isolation Identification of Casing Failure Depth Identification of Excess Period (Excess Length) Case Study – Water Hammer Data in an Unconventional Reservoir Interpretation of frac geometry and friction in the fracture Relationship to well productivity

Study on Vibration Characteristics of Fracturing Piping in Pump-Starting and Pump-Stopping Water Hammer

Dynamic Interaction Between Valve-Closure Water Hammer Wave and Centrifugal Pump

A study of the numerical simulation of water hammer with column separation and cavity collapse in pipelines

Water hammer response characteristics of wellbore-fracture system: Multi-dimensional analysis in time, frequency and quefrency domain

Three-dimensional computational fluid dynamics simulation of valve-induced water hammer

Study on the Effect of Fracturing Pump Start and Stop on Tubing Fluid-Structure Interaction Vibration in HPHT Wells via MOC

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

Numerical Simulation of the Water Hammer Caused by Accidental Pump-stop in Long Water Supply Systems

An Experimental Study on the Water Hammer with Cavity Collapse under Multiple Interruptions

Dynamic characterization of water hammer in gangue fly ash slurry pipelines during valve closure

Wellbore annulus water hammer pressure prediction based on transient multi-phase flow characteristics

An investigation of data analysis method for hydraulic fracturing based on the water hammer effect

Experimental investigation on the water hammer characteristic of stalling fluid in eccentric casing-tubing annulus

Mechanism and quantitative criterion of free vibration characteristics of hydraulic systems using the water hammer reflection coefficient

Numerical Simulation and Optimization on Valve-Induced Water Hammer Characteristics for Parallel Pump Feedwater System

Practical Applications of Water Hammer Analysis from Hydraulic Fracturing Treatments

Water hammer in pipelines based on different friction models

Study of Resistance Distribution and Numerical Modeling of Water Hammer in a Long-Distance Water Supply Pipeline

Unsteady friction and visco-elasticity in pipe fluid transients

Study on the Effect of Reciprocating Pump Pipeline System Vibration on Oil Transportation Stations

Emergency Pump-Rate Regulation to Mitigate Water-Hammer Effect—An Integrated Data-Driven Strategy and Case Studies