Abstract:The prime objective of this work is to deal with the kinematics of spatial hybrid manipulators. In this direction, in 1955, Denavit and Hartenberg proposed a consistent and concise method, known as D-H parameters method, to deal with kinematics of open serial chains. From literature review, it is found that D-H parameter method is widely used to model manipulators consisting of lower pairs. However, the method leads to ambiguities when applied to closed-loop, tree-like and hybrid manipulators. Furthermore, in the dearth of any direct method to model closed-loop, tree-like and hybrid manipulators, revisions of this method have been proposed from time-to-time by different researchers. One such kind of revision using the concept of dummy frames has successfully been proposed and implemented by the authors on spatial hybrid manipulators. In that work, authors have addressed the orientational inconsistency of the D-H parameter method, restricted to body-attached frames only. In the current work, the condition of body-attached frames is relaxed and spatial frame attachment is considered to derive the kinematic model of a 7-degree of freedom spatial hybrid robotic arm, along with the development of closed-loop constraints. The validation of the new kinematic model has been performed with the help of a prototype of this 7-degree of freedom arm, which is being developed at Council of Scientific & Industrial Research–Central Scientific Instruments Organisation Chandigarh to aid the surgeon during a medical surgical task. Furthermore, the developed kinematic model is used to develop the first column of the Jacobian matrix, which helps in providing the estimate of the tip velocity of the 7-degree of freedom manipulator when the first joint velocity is known.

Workspace analysis and trajectory tracking of a planar hybrid manipulator with ball screw feed drive

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Configuration and Kinematic Analysis of a Novel Hybrid Surgical Robot with a Ball Joint

Jerk-bounded and -Continuous Trajectory Planning for a 6-DOF Serial Robot Manipulator with Revolute Joints

Workspace Analysis of a Hybrid Kinematic Machine Tool with High Rotational Applications

Motion Control of the 2-DOF Parallel Manipulator of a Hybrid Machine Tool.

Dynamic Modeling and Trajectory Tracking Control of a Novel Muck-Removal Hydraulic Manipulator

Workspace and rotational capability analysis of a spatial 3-DoF parallel manipulator*

Kinematic Analysis of A Novel Three Degree-Of-Freedom Planar Parallel Manipulator

Trajectory Planning and Control of Handling Robot Manipulator

Kinematic and dynamic modelling of a novel two-DOF direct-drive planar parallel manipulator

Kinematic modeling of a 7-degree of freedom spatial hybrid manipulator for medical surgery

Dynamic Analysis and Model-Based Feedforward Control of a 2-Dof Translational Parallel Manipulator Driven by Linear Motors

Kinematics and dynamics analysis of a six-degree of freedom parallel manipulator

Trajectory tracking control of a pneumatically actuated continuum manipulator in the presence of obstacles by using terminal sliding mode control

Dynamic Model Based Nonlinear Tracking Control of a Planar Parallel Manipulator

Kinematics Modeling And Workspace Analysis Of A 5-Dof Hydraulic Manipulator

Trajectory Planning of a Novel 2-Dof High-Speed Planar Parallel Manipulator

On the Analysis of a New Spatial Three-Degrees-of-freedom Parallel Manipulator

Kinematic Analysis of A Novel Type of 6-DOF Hybrid Serial-parallel Manipulator

Kinematics analysis and workspace optimization for a 4-DOF 3T1R parallel manipulator