Performance of constructed wetlands with different substrates for the treated effluent from municipal sewage plants

Cao Shiwei,Jing Zhaoqian,Yuan Peng,Wang Yue,Wang Yin

DOI: https://doi.org/10.2166/wrd.2019.032

2019-09-11

Journal of Water Reuse and Desalination

Abstract:Abstract Constructed wetlands (CWs) are effective as an advanced treatment process for the treated effluent of municipal wastewater plants. An appropriate substrate, suitable macrophytes, and proper operation are crucial for pollutant abatement. In this research, three subsurface flow CWs with various substrates were investigated. Pollutants abatement efficiency under various operational schemes were analyzed. The results showed that the satisfactory hydraulic loading rate was 0.25 m3/(m2·d). When the C/N ratio of influent was adjusted to 5.87 by adding a carbon source, the denitrification and dephosphorization efficiency would be improved, with 7–8 mg/L for total nitrogen (TN) and 0.4 mg/L for total phosphorus (TP) in the effluent, which can achieve the Class 1A Discharge Standard for discharge to natural waterways in China. A greater depth of submersion for the substrate layer resulted in a more conducive environment for the abatement of nitrogen substances. However, a 40-cm depth of submersion in CWs results in better removal efficiency of TN and TP. A plastic ring substrate (PRS) contains biological enzyme promoter formula, which was conducive to nitrifying and denitrifying bacteria. The biofilm affinity and coordination with plants made the PRS more effective than the other two substrates, especially for NO3–-N and TN abatement efficiency.

engineering, environmental,water resources