Abstract:How to attenuate water surfactant pollution using carbon nanomaterials (CNMs) has been gaining increasing research attention in recent years. However, how the composition of cationic surfactants and physicochemical properties of CNMs may affect cationic surfactant maximum removal efficiency (Refficiency-max) with minimal cost from the aqueous phase and the associated mechanisms remain largely unclear. To address this knowledge gap, we compared removal efficiency of three cationic surfactants including dodecyl dimethyl benzyl ammonium chloride (DDBAC), tetradecyl dimethyl benzyl ammonium chloride (TDBAC) and hexadecyltrimethylammonium bromide (CTAB) by various carbon nanotubes (CNTs), including pristine and OH– or COOH-functionalized multiwalled- (MWCNTs) and single-walled (SWCNTs) CNTs. The results showed that Refficiency-max of CTAB by pristine MWCNTs with an outer diameter OD < 8 nm is 50.36 ± 0.56%, while that by OH-MWCNTs with OD < 8 nm is merely 22.72 ± 0.21%. Surface area and porosity of CNTs strongly affect Refficiency-max of cationic surfactants. The MWCNTs with a smaller OD have a higher Refficiency-max than that with a larger one especially for CTAB, due to their larger surface area and porosity. Among various CNTs, SWCNTs is an ideal choice for removing cationic surfactants, especially for non-aromatic CTAB. Interestingly, for most cases, cationic surfactant removal by CNTs decreased when the amount of CNTs added exceeded a certain level, attributable to their aggregation. This implies that it is impossible to completely remove some cationic surfactants even when excess CNTs were added. The π-π bonding dominates over hydrophobic interaction in regulating cationic surfactant removal especially for those with aromatic structure. Aromatic cationic surfactants such as DDBAC and TDBAC can be removed more readily by CNTs than those without a benzene ring due to their strong π-π interactions. TDBAC has a longer hydrophobic chain relative to DDBAC, leading to a better removal efficiency by CNTs, due to stronger hydrophobic interaction.

Comparative adsorption of remazol brilliant blue R and copper in aqueous solutions by carbon nanotubes with different levels of carboxyl group and specific surface area

Boosting the Adsorption and Removal of Dye from Water by COOH-functionalized Carbon Nanotubes

Adsorption of remazol brilliant blue R by carboxylated multi-walled carbon nanotubes

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Removal of Cu2+ Ions from Aqueous Solutions by Carbon Nanotubes

Competitive Adsorption of Pb2+, Cu2+ and Cd2+ Ions from Aqueous Solutions by Multiwalled Carbon Nanotubes

Removal of Dyes from Water by Carbon Nanotubes

A Novel One-Pot Route for Large-Scale Synthesis of Novel Magnetic CNTs/Fe@C Hybrids and Their Applications for Binary Dye Removal

Adsorption of methylene blue on the modified as-prepared carbon nanotubes

Removal of Heavy Metals from Aqueous Solution by Carbon Nanotubes: Adsorption Equilibrium and Kinetics.

Comparative study of graphene oxide, activated carbon and carbon nanotubes as adsorbents for copper decontamination.

Enhanced Adsorptive Removal of Methyl Orange and Methylene Blue from Aqueous Solution by Alkali-Activated Multiwalled Carbon Nanotubes

STUDY ON THE PREPARATION AND ADSORPTION PROPERTIES OF MAGNETIC CARBON NANOTUBES MODIFIED BY NaClO

Methods of Using Carbon Nanotubes As Filter Media to Remove Aqueous Heavy Metals

Eco-Friendly Carbon Nanotubes Reinforced with Sodium Alginate/Polyacrylic Acid for Enhanced Adsorption of Copper Ions: Kinetics, Isotherm, and Mechanism Adsorption Studies

Chemical composition-dependent removal of cationic surfactants by carbon nanotubes.

Synthesis and Characterization of Dithiocarbamate Carbon Nanotubes for the Removal of Heavy Metal Ions from Aqueous Solutions

Preparation of Amine Functionalized Carbon Nanotubes Via a Bioinspired Strategy and Their Application in Cu2+ Removal

Adsorption capacity of different types of carbon nanotubes towards metronidazole and dimetridazole antibiotics from aqueous solutions: effect of morphology and surface chemistry

Surface-modified Nanoscale Carbon Black Used As Sorbents for Cu(II) and Cd(II).

Removal of Cu(Ii) from Aqueous Solutions by Tartaric Acid Modified Multi-Walled Carbon Nanotubes