Abstract:3D printing of the dielectric elastomer actuator and on‐demand control of the patterned actuators. Dielectric elastomer actuator (DEA) is one of the most promising types of soft actuation technology, which has great potential in the fields of wearable devices and soft robotics. It consists of a dielectric elastomer layer, which is an electroactive polymer that can produce large deformation, and compliant electrodes to bring charges to certain locations. In this article, direct ink writing (DIW) technology, an emerging 3D printing method, was used to realize the preparation of the electrode‐elastomer‐electrode stack of the DEA. The dielectric and electrode materials were designed with suitable rheological properties to fulfill the need for the extrusion process. The formulated silicone material not only presented excellent dielectric and mechanical properties, but also good printability. Extrudable electrodes were prepared based on silicone composites with the characteristics of mechanical compliance and high conductivity. The fully printed DEA achieved a maximum actuation strain of 11.11%, a fast response time of 0.76 s and excellent electromechanical repeatability. DEA arrays were also achieved, possessing the ability to carry out on‐demand actuation, allowing each actuator to be activated singly or work in groups. Thanks to the design freedom of the DIW technology, this strategy is able to manufacture fine and complex structures with precise active zones, paving a way for the fabrication of next‐generation smart devices. Highlights Printable silicone ink was formulated with good dielectric property and softness. Carbon black/silicone composites were obtained with high conductivity and compliant nature. The silicone composites were printed into thin films to act as electrodes. Fully 3D printed dielectric elastomer actuators (DEA) were achieved by direct ink writing. DEA arrays with on‐demand actuation were realized by well‐defined printing.

Induction of anisotropic motions in dielectric elastomer actuators by additive manufacturing

Spatially Modulus-Patterned dielectric elastomer actuators with oriented electroactuation

Tunable Actuation of Dielectric Elastomer by Electromechanical Loading Rates

Self-healing High-performance Dielectric Elastomer Actuator with Novel Liquid-solid Interpenetrating Structure

Modelling and Control of a Dielectric Elastomer Actuator

Mechanisms of large actuation strain in dielectric elastomers

Novel Arrangements For High Performance And Durable Dielectric Elastomer Actuation

The Behavior of Dielectric Elastomer Actuators Connected in Series and Parallel

Self‐Strengthening Dielectric Elastomer of Triblock Copolymer with Significantly Improved Electromechanical Performance under Low Voltage

A Unidirectional Soft Dielectric Elastomer Actuator Enabled by Built-In Honeycomb Metastructures.

Dielectric elastomer film with anisotropic actuation deformation on film plane

Tunable electromechanical properties of double-layer stacked anisotropic dielectric elastomer actuators

An Integrated Design and Fabrication Strategy for Planar Soft Dielectric Elastomer Actuators

Influence of Active-to-Passive Ratio on the Deformation in Circular Dielectric Elastomer Actuators

Modeling and Design Optimization of a Pre-stretched Rolled Dielectric Elastomer Actuator.

Fully 3D printed dielectric elastomer actuators based on silicone and its composites

Fiber-Reinforced Equibiaxial Dielectric Elastomer Actuator for Out-of-Plane Displacement

An Anisotropic Dielectric Elastomer Actuator with an Oriented Electrospun Nanofiber Composite Film

Design of Translational and Rotational Bistable Actuators Based on Dielectric Elastomer

Spray-Printing and Spin Methods to Fabricate Multilayered Dielectric Elastomer Actuators Embedded with Liquid Metal Electrodes

Deformation Study of an In-Plane Oscillating Dielectric Elastomer Actuator Having Complex Modes