Abstract:The supercritical Water-cooled Reactor (SCWR) was adopted as one of the promising IV-generation reactors within the framework of the international forum “Generation-IV” (MFP). More than 45 organizations in 16 countries with advanced nuclear power are developing SCWR concept proposals for this program. The SCWR concept is based on the implementation of a direct-flow single-circuit scheme of a nuclear power plant, cooled by SCP water. The introduction of this type of nuclear power plant will increase the efficiency up to 45 %, increase the fuel reproduction coefficient, reduce metal consumption and construction volumes, and improve economic and environmental performance. Countries participating in the SCWR MFP consider the development of a reactor with a thermal neutron spectrum and uranium fuel as a priority task, but in the subsequent stages, with increasing problems with the storage of spent nuclear fuel (SNF) and small actinides (SA), it is possible to switch to a reactor with a fast neutron spectrum, MOX fuel and a closed fuel cycle (CFC). Within the framework of the MFP, various versions of SCWR are being developed differing in the parameters of the coolant and its circulation schemes in the core. Groups have been created to study the issues of physics, thermohydraulics, heat transfer, materials, personnel training. Water-cooled reactors research carried out during ~15 years in A.I. Leypunsky Institute for Physics and Power Engineering (IPPE), OKB “Gidropress”, NRC “Kurchatov Institute” with supercritical thermal and fast neutron spectra, it seems more promising to develop a reactor with fast spectrum of neutrons. For ~10 years, IPPE and OKB “Gidropress” have been working together on the VVER-SKD concept project - a single-circuit RC with a coolant SCP with a fast-resonance neutron spectrum with a capacity of Ne = 1700 MW. This rector is recognized as a prospect for the development of VVER technology with the possibility of using uranium fuel and switching in the future to MOX-based fuel (U-Pu-Th) and to SNF. When developing VVER-SKD, it is necessary to solve a complex of scientific and technical problems: development and verification of calculation codes of improved estimation for neutron physics, hydrodynamics and water heat transfer of SCP in fuel assemblies (FA) of the core and throughout the reactor; development of fuel elements and FA structures, justification of their operability; analysis of reactor stability under transient and emergency conditions; selection of heat-resistant structural materials for fuel rods and reactor vessel with high corrosion resistance; justification and development of optimal water-chemical regime, etc. Some of these problems are investigated in bench and loop tests, but to solve most of them and justify the technology for subsequent licensing, it is necessary to create an experimental test reactor. In relation to the VVER-SKD reactor Ne = 1700 MW, the paper presents the results of calculations of fuel cycles with MOX and nitride fuels, justifies the use of NPS in the ZTC, discusses the problems of heat exchange and thermal hydraulics, and suggests a test reactor option.

Leningrad NPP-2 start-up loss of power test and its simulation with use of KORSAR/GP code

Nitrogen transport in the primary circuit of a VVER during a LOCA occurring under plant cool-down conditions

Simulation of VVER-1000 Guillotine Large Break Loss of Coolant Accident Using RELAP5/SCDAPSIM/MOD3.5

Investigation of NACOK Air Ingress Experiment Using Different System Analysis Codes

Investigation of System Responses of the Maanshan Nuclear Power Plant to the Loss of Residual Heat Removal During Midloop Operation Using a RELAP5/MOD3 Simulation

Simulated safety analysis of a total loss of feedwater accident in the steam generator of CPR1000 nuclear power plant

Safety Analysis in VVER-1000 Due to Large-Break Loss-of-Coolant Accident and Station Blackout Transient Using RELAP5/SCDAPSIM/MOD3.5

Input Data to Match Model and Prototype States of VVER NPP

Experimental study of heat and mass transfer processes affecting the duration of operation of VVER passive core cooling systems

Analysis of loss of flow without scram test in the FFTF reactor – Part II: System thermal hydraulics with point neutron kinetics

Comparison of MSLB transient results using the 3D coupled code TRACEv5p05/PARCS and the system thermal hydraulic code RELAP5

KIR-TG code for interconnected thermo-hydraulic and neutron-physical test calculations of VVER-SKD reactors

Analysis of Loss of Vacuum Accident at ITER using SOCRAT-V1/V2

Assessment of the simulation capability of RELAP5/MOD3 compared with IIST tests for loss of the residual heat removal system during midloop operation

Accurate Simulation of Htgr Steam Generator for Pressurized Loss of Forced Cooling Accident

Safety Analysis of Loss of NPP Off-Site Power with Failure of Reactor SCRAM (ATWS) for VVER-1000

Monte Carlo Simulation of the UK’s First EPR Nuclear Reactor Startup Core Using Serpent

Selecting the Startup Option for the Surgut GRES-2 800-MW Power Unit in the Absence of Its Own Steam Source

TECHNICAL PROBLEMS OF CREATION OF POWER REACTORS COOLED BY WATER OF SUPERCRITICAL PRESSURE

Experimental Investigation of Early Initiation of Primary Cooldown by Secondary-Side Depressurization in A Pwr Inadequate Core-Cooling Accident

Monte Carlo Investigation of the UK’s First EPR Nuclear Reactor Startup Core Using Serpent