Abstract:This work introduces the synthesis of hybrid polymer electrolytes based on polyethylene oxide (PEO) and electrolyte solution bis(trifluoromethane)sulfonimide lithium salt/ionic liquid 1-ethyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide (LiTFSI/EMIMTFSI) with in situ produced and dispersed silica particles by the sol–gel method. Conventional preparation of solid polymer electrolytes was followed by desolvation of lithium salt in a polymer matrix of PEO, which, in some cases, additionally contains plasticizers. This one-pot synthesis is an alternative route for fabricating a solid polymer electrolyte for solid-state batteries. The presence of TFSI- reduces the crystallinity of the PEO matrix (plasticizing effect), increases the dissociation and solubility of LiTFSI in the PEO matrix because of a highly delocalized charge distribution, and reveals excellent thermal, chemical, and electrochemical stability. Tetraethylorthosilicate (TEOS) was chosen due to the slow reaction rate, with the addition of (3-glycidyoxypropyl)trimethoxysilane (GLYMO), which contributes to the formation of a silica network. FTIR studies confirmed the interactions between the silica, the polymer salt, and EMIMTFSI. Impedance spectroscopy measurements were performed in a wide range of temperatures from 25 to 70 °C. The electrochemical performance was explored by assembling electrolytes in LiCoO2 (LCO), NMC(811), and LiFePO4 (LFP) coin half-cells. The HPEf15 shows a discharge capacity of 143 mA/g for NMC(811) at 0.1 C, 134 mA/g for LCO, and 139 mA/g for LFP half-cells at 0.1 C and 55 °C. The LFP half-cell with a discharge capacity of 135 mA/g at 0.1 C (safety potential range of 2.8 to 3.8) obtained a cyclability of 97.5% at 55 °C after 100 cycles. Such a type of electrolyte with high safety and good electrochemical performance provides a potential approach for developing a safer lithium-ion battery.

PEO/LAGP hybrid solid polymer electrolytes for ambient temperature lithium batteries by solvent-free, “one pot” preparation

Advanced High-Voltage Electrolyte Design Using Poly(ethylene oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium Metal Batteries

Hybrid Electrolyte Based on PEO and Ionic Liquid with In Situ Produced and Dispersed Silica for Sustainable Solid-State Battery

Hybrid solid electrolyte with the combination of LATP ceramic and PEO polymer by a solvent-free procedure

Ultra-Long-Life and Ultrathin Quasi-solid Electrolytes Fabricated by Solvent-free Technology for Safe Lithium Metal Batteries

In Situ Fabrication of Solvent-Free Solid Polymer Electrolytes for Wide-Temperature All-Solid-State Lithium Metal Batteries

Gravity-driven Poly(ethylene glycol)@Li1.5Al0.5Ge1.5(PO4)3 asymmetric solid polymer electrolytes for all-solid-state lithium batteries

Advanced High-Voltage Electrolyte Design Using Poly(ethylene Oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium-Metal Batteries

Localized High Concentration Polymer Electrolyte Enabling Room Temperature Solid-State Lithium Metal Batteries with Stable LiF-rich Interphases

Boosting the Performance of Solid‐State Lithium Battery Based on Hybridizing Micron‐Sized LATP in a PEO/PVDF‐HFP Heterogeneous Polymer Matrix

Ceramic/Polymer Hybrid Electrolyte with Enhanced Interfacial Contact for All-Solid-State Lithium Batteries

Unconventional PEO-PPC quasi-solid state blend polymer electrolyte for high efficiency solid-state Li-metal batteries

Enhanced Electrochemical Performance of Hybrid Solid Polymer Electrolytes Encompassing Viologen for All-Solid-State Lithium Polymer Batteries

Poly(ester‐alt‐acetal) Electrolyte via In Situ Copolymerization for High‐Voltage Lithium Metal Batteries: Lithium Salt Catalysts Deciding Stable Solid‐Electrolyte Interphase

Solid Electrolyte Based on Waterborne Polyurethane and Poly(ethylene Oxide) Blend Polymer for All-Solid-state Lithium Ion Batteries

A newly designed composite gel polymer electrolyte based on poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for enhanced solid-state lithium-sulfur batteries.

Crosslinked polytetrahydrofuran-based solid-state electrolytes with improved mechanical stability and electrochemical performance

Polycation ionic liquid tailored PEO-based solid polymer electrolytes for high temperature lithium metal batteries

Synergistic Combination of Crosslinked Polymer and Concentrated Ionic Liquid for Electrolytes with High Stability in Solid-State Lithium Metal Batteries

Composite polymer electrolyte based on poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for solid-state batteries

Hybrid Crosslinked Solid Polymer Electrolyte via In‐Situ Solidification Enables High‐Performance Solid‐State Lithium Metal Batteries