Abstract:In this study, neodymium‐doped yttrium aluminum garnet ceramics with customized 3D structures are successfully fabricated through a combination of "sol‐gel" synthesis and microcontinuous liquid interface printing processes. After sintering, samples show satisfactory photoluminescence, emitting light at 1064 nm upon excitation. These results showcase potential applications of the samples in optical circuits and gain metamaterials with diverse 3D geometries. (Scale bar: 2 μm). Polycrystalline yttrium aluminum garnet (YAG) ceramic doped with neodymium (Nd), referred to as Nd:YAG, is widely used in solid‐state lasers. However, conventional powder metallurgy methods suffer from expenses, time consumption, and limitations in customizing structures. This study introduces a novel approach for creating Nd:YAG ceramics with 3D free‐form structures from micron (∼70 μm) to centimeter scales. Firstly, sol‐gel synthesis is employed to form photocurable colloidal solutions. Subsequently, by utilizing a home‐built micro‐continuous liquid interface printing process, precursors are printed into 3D poly(acrylic acid) hydrogels containing yttrium, aluminum, and neodymium hydroxides, with a resolution of 5.8 μm pixel−1 at a speed of 10 μm s−1. After the hydrogels undergo thermal dehydration, debinding, and sintering, polycrystalline Nd:YAG ceramics featuring distinguishable grains are successfully produced. By optimizing the concentrations of the sintering aids (tetraethyl orthosilicate) and neodymium trichloride (NdCl3), the resultant samples exhibit satisfactory photoluminescence, emitting light concentrated at 1064 nm when stimulated by a 532 nm laser. Additionally, Nd:YAG ceramics with various 3D geometries (e.g., cone, spiral, and angled pillar) are printed and characterized, which demonstrates the potential for applications, such as laser and amplifier fibers, couplers, and splitters in optical circuits, as well as gain metamaterials or metasurfaces.

Rapid, convenient and low-energy preparation of spherical rare earth doped YAG phosphors by a laser sintering method

High luminous efficiency and excellent thermal performance in rod-shaped YAG:Ce phosphor ceramics for laser lighting

Synthesis and Upconversion Luminescence of Monodispersed, Submicron-Sized Er3+:Y2o3 Spherical Phosphors

Fabrication Progress of Rare Earth Doped Oxysulfide Phosphors

Synthesis of High-Performance YAG:Ce Phosphor Powder with Low Sintering Temperature and YAG:Ce-Doped Bi-B Glass by a One-Step Method

Solution Combustion Synthesis and Enhanced Luminescence of Eu3+-activated Y2Ce2O7 Phosphor Nanopowders

Recent Progress in Synthesis of YAG Powders by Chemical Precipitation Method for Transparent Ceramics

PREPARATION AND PHOTOLUMINESCENCE PROPERTIES OF YAG:Ce3+ SPHERICAL PHOSPHOR NANO-POWDERS BY THE MICROEMULSION METHOD

Rare-Earth-Doped Y4Al2O9 Nanoparticles for Stable Light-Converting Phosphors

Impinging streams application in mass production of rare earth ions doped upconversion luminescence microparticles

Rapid synthesis of Y3Al5O12 powders via plasma electrolysis

Fabrication and Characterization of Rare-Earth-Doped Nanostructures on Surfaces

Rapid, Micron‐Resolution 3D Printing of Nd:YAG Ceramic with Optical Gain

Fabrication and deagglomeration of YAG nanopowders

Preparation of Novel Glass Phosphors by Spark Plasma Sintering

Enhanced luminescence in rare-earth-free fast-sintering glass-ceramic

Preparation and Characterization of Y3Al5O12:Nd Phosphor Powders by Ultrasonic Atomization and Co-precipitation Process

Preparation, patterning and luminescence properties of rare earth-doped YVO4 nanocrystalline phosphor films via sol-gel soft lithography

Microwave Assisted Preparation of YAG and Yb:YAG Transparent Ceramic Nanopowders for Laser Crystal

Stable, Heat-Conducting Phosphor Composites for High-Power Laser Lighting

Polymer‐Surface‐Mediated Mechanochemical Reaction for Rapid And Scalable Manufacture of Perovskite Qd Phosphors