Abstract:The work demonstrates the effective utilization of hybrid Polyurethane - palladium doped zirconium oxide (Pd-ZrO2) as innovative carriers for corrosion protection coatings on steel materials. ZrO2 and Pd-ZrO2 nanoparticles were successfully synthesized using Photodeposition followed by the hydrothermal synthesis method. The synthesized nanoparticles were then incorporated into the polyurethane matrix and characterized using Fourier-transform infrared spectroscopy and scanning electron microscopy (SEM). The FTIR and SEM confirm the presence of ZrO2 and Pd-ZrO2 nanoparticles and their morphologies in polyurethane composites material. The thermogravimetric analysis (TGA) results indicated that the polyurethane matrix remained stable up to 250 °C. At 800 °C, >50% of residues are observed for Pd-ZrO2 - polyurethane in the TGA analysis, which confirms that the primer and nanoparticles addition enhances the thermal stability of the composite. The water contact angle measurement explains the hydrophobic behavior of nanocomposite modified coatings on a mild steel substrate. It indicates that Pd-ZrO2 and primer significantly increase the hydrophobicity of polyurethane. The major advantages of developing water-repellent or hydrophobic surfaces open up a world of possibilities for metals and alloys in terms of corrosion prevention. Electrochemical impedance spectroscopy (EIS) and a salt spray test were used to determine the anti-corrosion behavior of the prepared polymer nanocomposites. The polymer nanocomposite coatings have better anti-corrosive capabilities when compared to pure polyurethane. The corrosion protection efficiency increased from 76.63% to 97.57% upon incorporating 2 wt % of Pd-ZrO2 in the polyurethane matrix. The results confirmed that the modifications on the polyurethane enhanced the hydrophobicity and anti-corrosion properties of the polymer nanocomposite coatings.

Study of the physical and electrochemical properties of hybrid paint system based on zinc-rich primer for mild steel protection

Corrosion Study Of Zinc-Rich Epoxy Ester Paints For Cold Galvanizing Of Mild Steel

Comparative Study of Carbonaceous and Polymer Conductive Additives on Anticorrosion Performance of Epoxy Zinc-Rich Primer

Monitoring the anticorrosion performance of developed epoxy-based paint formulations on metallic surfaces by electrochemical impedance spectroscopy

Influence of Surface Roughness on Performance of Zinc-Rich Paint Coatings

Fabrication of a Conductive Additive for the Anticorrosion Enhancement of Zinc-Rich Epoxy Coatings

New Formulation of Anticorrosive Waterborne Epoxy Coatings for SAE 1010 Steel Protection

A Comparative Study on the Anti-Corrosive Performance of Zinc Phosphate in Powder Coatings

Anticorrosive Painting System Constructed on a Porous Silica Pretreatment Layer Prepared with the Aid of Alkaline Catalysis

THE DEVELOPMENT OF ZINC-RICH PAINTS

Electrochemical Behavior of Organic and Inorganic Zinc-Rich Coatings in 3.5% NaCl Solution

STUDY OF THE ELECTROCHEMICAL BEHAVIORS OF THE ZINC-RICH PAINTS BASED MULTILAYER ORGANIC COATINGS IN NaCl SOLUTION

Anticorrosive paint with a modified zeolite as functional pigment for SAE 1010 steel protection

Study the Preparation of Polymeric Coatings Supported by Nanomaterials to Inhibit Corrosion in the Oil Tanks

Fabrications of hybrid Polyurethane-Pd doped ZrO2 smart carriers for self-healing high corrosion protective coatings

Studies on coatings containing nano‐zinc oxide for steel protection

Corrosion Protection Supplied by Styrene Butadiene Latex Modified Zinc‐rich Primer

Fabrication and Performance of Inorganic-Organic Zinc-Rich Paints Modified by Carbon Nanotubes

α -Zirconium hydrogenophosphate as nano-containers of 2 aminobenzimidazole for the corrosion protection of zinc in NaCl medium

Efficacy of zinc and copper oxide nanoparticles as heat and corrosion-resistant pigments in paint formulations

Deterioration of Cathodic Protection Action of Zinc-Rich Paint Coatings in Atmospheric Exposure