Abstract:In recent years, a large number of experimental studies have shown that graphene fibers, a new type of carbon fiber consisting of many monolayers of wrinkled and curved graphene sheets aligned in the axial direction of the fiber, exhibit high tensile strength and many functionalities. Although much effort has been devoted to improving their mechanical properties, the underlying deformation mechanism of graphene fibers under tension still remains unclear. Here, we construct simulation models of graphene fibers with diameters of 10 and 20 nm using wrinkled graphene sheets with topological defects, hereafter referred to as graphene ruga sheets, as building blocks via a combination of the phase field crystal method and atomistic modeling. We then perform a series of large-scale molecular dynamics simulations of the constructed graphene fibers under uniaxial tension. Our simulation results revealed that the graphene fibers undergo plastic deformation with stress flow and that their tensile strength (i.e., the peak stress in the stress-strain curve) and Young's modulus increase with decreasing fiber diameter, which is mainly attributed to the decrease in the number of defects with reduced fiber diameter. Our simulations further revealed that the tensile strength is related to nanocrack nucleation/initiation from nanovoids or sharp corners between neighboring fused graphene sheets, while the flow stress is determined by interlayer slipping between neighboring graphene layers. Furthermore, we investigated the influence of structural continuity on the tensile strength of graphene fiber. The results showed that the tensile strength increases 1.9-3.5 times with the improvement in the structural continuity of graphene fibers within the investigated range. Our simulations provide mechanistic insights into the deformation mechanism of graphene fibers, which may be used to guide their design and fabrication. (C) 2020 Elsevier Ltd. All rights reserved.

Tensile test analysis of carbon fiber composite material by molecular dynamics simulation

Molecular dynamics simulation of tension of polymer composites reinforced with graphene and graphene oxide

Molecular Simulation of the Interfacial Properties of an Epoxy Composite Reinforced Using a Carbon Nanotube/Carbon Fiber Hybrid

Evaluation of interface properties of carbon fiber/resin using the full atomistic model considering the electric charge state

Mechanical Performance of Graphene/polymethyl-Methacrylate Nano-Composites under Tension Loads: A Coarse-Grained Molecular Dynamic Simulation

Investigation on the Tensile Behavior of Graphene-Aluminum Nano-Laminated Composites by Molecular Dynamics Simulation

Modeling and Testing Strain Rate-Dependent Tensile Strength of Carbon/Epoxy Composites

Experimental and numerical study on the loading rate dependent tensile behavior of carbon fiber/epoxy interface

Experiment study on the strain rate behavior of carbon/epoxy composite materials

Effects of CNT Microstructural Characteristics on the Interfacial Enhancement Mechanism of Carbon Fiber Reinforced Epoxy Composites Via Molecular Dynamics Simulations

The Properties of Dry-Spun Carbon Nanotube Fibers and Their Interfacial Shear Strength in an Epoxy Composite

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

Compressive behaviors and deformation mechanism of carbon fiber reinforced epoxy composites: A microscopic and molecular dynamics perspective

Investigation of mechanical properties of epoxy-containing Detda and Degba and graphene oxide nanosheet using molecular dynamics simulation

Tensile Properties and Failure Mechanism of Carbon Fiber Reinforced Epoxy Composite with Resin Rich Defects

A new multiscale numerical characterization of mechanical properties of graphene-reinforced polymer-matrix composites

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites

Optimization of Tensile Strength and Young's Modulus of CNT-CF/Epoxy Composites Using Response Surface Methodology (RSM)

Composite Structural Modeling and Tensile Mechanical Behavior of Graphene Reinforced Metal Matrix Composites

Atomistic Simulations of the Tensile Behavior of Graphene Fibers