Abstract:Pulsed thermography is a commonly used non-destructive testing method and is increasingly studied for the assessment of advanced materials such as carbon fibre-reinforced polymer (CFRP). Different processing approaches are proposed to detect and characterize anomalies that may be generated in structures during the manufacturing cycle or service period. In this study, matrix decomposition using Robust PCA via Inexact-ALM is investigated as a pre- and post-processing approach in combination with state-of-the-art approaches (i.e., PCT, PPT and PLST) on pulsed thermography thermal data. An academic sample with several artificial defects of different types, i.e., flat-bottom-holes (FBH), pull-outs (PO) and Teflon inserts (TEF), was employed to assess and compare defect detection and segmentation capabilities of different processing approaches. For this purpose, the contrast-to-noise ratio (CNR) and similarity coefficient were used as quantitative metrics. The results show a clear improvement in CNR when Robust PCA is applied as a pre-processing technique, CNR values for FBH, PO and TEF improve up to 164%, 237% and 80%, respectively, when compared to principal component thermography (PCT), whilst the CNR improvement with respect to pulsed phase thermography (PPT) was 77%, 101% and 289%, respectively. In the case of partial least squares thermography, Robust PCA results improved not only only when used as a pre-processing technique but also when used as a post-processing technique; however, this improvement is higher for FBHs and POs after pre-processing. Pre-processing increases CNR scores for FBHs and POs with a ratio from 0.43% to 115.88% and from 13.48% to 216.63%, respectively. Similarly, post-processing enhances the FBHs and POs results with a ratio between 9.62% and 296.9% and 16.98% to 92.6%, respectively. A low-rank matrix computed from Robust PCA as a pre-processing technique on raw data before using PCT and PPT can enhance the results of 67% of the defects. Using low-rank matrix decomposition from Robust PCA as a pre- and post-processing technique outperforms PLST results of 69% and 67% of the defects. These results clearly indicate that pre-processing pulsed thermography data by Robust PCA can elevate the defect detectability of advanced processing techniques, such as PCT, PPT and PLST, while post-processing using the same methods, in some cases, can deteriorate the results.

Optimizing input data for training an artificial neural network used for evaluating defect depth in infrared thermographic nondestructive testing

An Evaluation of Artificial Neural Networks Applied to Infrared Thermography Inspection of Composite Aerospace Structures

Spatio-Temporal 3-D Residual Networks for Simultaneous Detection and Depth Estimation of CFRP Subsurface Defects in Lock-In Thermography

Depth Classification of Defects Based on Neural Architecture Search

Enhancing Generalizability of a Machine Learning Model for Infrared Thermographic Defect Detection by Using 3D Numerical Modeling

Parametric Study of Anomaly Detection Models for Defect Detection in Infrared Thermography

Two-stream Convolutional Neural Network for Non-Destructive Subsurface Defect Detection Via Similarity Comparison of Lock-in Thermography Signals

Data Enhancement via Low-Rank Matrix Reconstruction in Pulsed Thermography for Carbon-Fibre-Reinforced Polymers

One-dimensional N-layer thermal modelling as a basis for effective machine learning training data generation for nondestructive testing of composite parts.

Efficient algorithm for thermal nondestructive testing and evaluation by considering the heteroscedastic nature of noise sources in infrared thermography

Infrared Image Defect Diagnosis Through LAB Space Transformation

Approaches for Accuracy Improvement of the X-ray Image Defect Detection of Automobile Casting Aluminum Parts Based on Deep Learning

Defect Depth Retrieval Method Based on Nonlinear Transformation for Pulsed Thermographic Inspection

Efficiency of using different types of infrared imagers in active thermal nondestructive testing of delaminations in non-metals

Temporal and Spatial Deep Learning Network for Infrared Thermal Defect Detection

Synthetic data generation using finite element method to pre-train an image segmentation model for defect detection using infrared thermography

Automatic Detection of CFRP Subsurface Defects via Thermal Signals in Long Pulse and Lock-In Thermography

Multiview Learning for Subsurface Defect Detection in Composite Products: A Challenge on Thermographic Data Analysis

An Efficient Parametrized Optical Infrared Thermography 3D Finite Element Framework for Computer Vision Applications

Reduced Training Data for Laser Ultrasound Signal Interpretation by Neural Networks

A Review of Artificial Intelligence Applications in Thermographic Non-Destructive Testing