Abstract:As the primary rock-breaking tool of the tunnel boring machine (TBM), the disc cutter experiences significant wear from the immense cutting load. Given the intricate geological conditions in TBM excavation, accurately assessing the extent of wear on disc cutters solely through experience and predictive models is challenging. Therefore, implementing synchronous wear monitoring when a disc cutter breaks rock to accurately assess the amount of wear on the disc cutter and determine the point at which a tool change is needed is extremely important. In this work, a disc cutter wear test system is designed on the basis of the principle of eddy current testing and the variation in disc cutter wear during cutting is revealed through experiments. The radial reduction rate ( D r ) is used as an index of disc cutter wear to analyze the variations in penetration, cutting speed, the cutting resistance coefficient ( C c ), and specific energy consumption (SE) in relation to disc cutter wear. The experimental results indicate that the measurement error of the disc cutter wear testing system is 8.6%, which allows disc cutter wear level to be obtained. With increasing cutting displacement, the D r of the disc cutter first increases rapidly but then slows. The C c of the disc cutter increases exponentially with increasing D r under different penetration depths. When the cutting displacement of the disc cutter reaches 40 m, D r exhibits an exponential growth trend with increasing cutting speed. The critical value of D r is 0.084. When D r exceeds this value, the cutting performance exhibits a sharp increase in torque, which significantly impacts the driving efficiency. The research results of this paper provide a reference for creating a disc cutter replacement plan and extending the service life of the disc cutter.

Optimum Design and Application Research of Eddy Current Sensor for Measurement of TBM Disc Cutter Wear

Development of a Real-Time Monitoring and Calculation Method for TBM Disc-Cutter's Cutting Force in Complex Ground

Design of Disc Cutter Wear Test System and Research on Wear Law Based on Eddy Current Testing Technology

Design and optimization of a new type of contactless radial C4D sensor

The energy method to predict disc cutter wear extent for hard rock TBMs

On-line thickness monitoring technique based on eddy-current and virtual system

Design and Optimization of A Flexible Arrayed Eddy Current Sensor

Geometric Optimization of a Flexible Arrayed Eddy Current Sensor for Non-Destructive Testing

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Study on Extraction of Electrical Runout in Eddy Current Measurement Using Finite Element Method

Simulation and Optimization Design of Inductive Wear Particle Sensor

Optimization Design of Eddy Current Sensor for Fuel Balls Detection of HTGR Based on Electromagnetic Field Simulation

Research on Transmission Performance of a Surface Acoustic Wave Sensing System Used in Manufacturing Environment Monitoring

Real-time estimation of machine cutting tool wear

A field parameters-based method for real-time wear estimation of disc cutter on TBM cutterhead

Improvement of Sensitivity of Eddy Current Thickness Sensors with Ferrite Core for CMP Process

Metal Thickness Measurement System Based on a Double-Coil Eddy-Current Method with Characteristic Ratio Detection.

The Design of Area-Change Eddy Current Sensor On Trailing

Design and Optimization of a BAW Magnetic Sensor Based on Magnetoelectric Coupling

Conductivity estimation of non-magnetic materials using eddy current method

Experimental Investigation on the Effect of Coil Shape on Planar Eddy Current Sensor Characteristic for Blade Tip Clearance