Abstract:Tritium extraction from materials is most commonly carried out using oxidative thermal desorption in purpose-built furnace systems and typically involves trapping the product in a water bubbler which is sampled for measurement using liquid scintillation counting (LSC). The performance of perhaps the most widely used commercial system, the Raddec Pyrolyser, has been evaluated for a broad range of sample types. Several parameters that were expected to affect tritium desorption and recovery were systematically studied. These included sample heating rates and end-point temperatures, carrier/oxidant gas flows, catalyst temperature, bubbler trapping and carry-over/memory effects. A catalyst such as platinised-alumina is used to ensure the quantitative oxidation of volatile combustion products to HTO and CO(2). This also ensures that the trapped decomposition products do not colourise the bubbler solutions that are subsequently sampled for LSC. Tritium evolution profiles were determined for a range of sample types and were obtained by systematically changing bubblers at a set of progressively increasing temperatures. These experiments showed the maximum heating temperature and total combustion time required for the complete recovery of tritium from samples was dependent on the sample matrix types and the (3)H form. These evolution profiles need only be determined once and are readily transferable to other Pyrolyser systems. For example tritiated water is rapidly liberated from samples at temperature around 100 degrees C whereas (3)H substituted for structural H in organic species can require a temperature in excess of 300 degrees C to be released. Higher temperatures (up to 900 degrees C) are needed to liberate (3)H originating from neutron capture reactions on trace Li or B within a material (e.g. reactor graphite or concrete). The furnace system investigated is highly effective at extracting tritium and (14)C from all sample types studied (soil, sediment, biota, wood, metal, plastic, concrete, graphite, etc.) and overall it demonstrates high and reproducible recoveries.

Efficiency enhanced electrolysis-based tritium continuous monitor

Feasibility Analysis of Tritium Measurement in the Aqueous Medium Based on a Plastic Scintillating Fiber Array

Measurement Techniques for Low-Concentration Tritium Radiation in Water: Review and Prospects

Simple Pretreatment Method for Tritium Measurement in Environmental Water Samples using a Liquid Scintillation Counter

Measurement and Sampling Techniques Verification for an Online Gaseous Tritium Monitoring Method

TRITIUM - A Real-Time Tritium Monitor System for Water Quality Surveillance

Enhancing low-level tritium detection in environmental waters: assessing the Hidex ULLA liquid scintillation counter

Basic study on tritium monitor using plastic scintillator for treated water discharge at Fukushima Daiichi Nuclear Power plant

Development of a real-time tritium-in-water monitor

Toward an efficient determination of tissue-free water tritium in food

Development of a practical tritiated water monitor to supervise the discharge of treated water from Fukushima Daiichi Nuclear Power Plant

Effective desorption of tritium from diverse solid matrices and its application to routine analysis of decommissioning materials

Low-level tritium measurements in freshwater and seawater samples

Demonstration of Passive Tritium Oxidation Using a Hydrophobic Catalytic Recombiner for Detritiation System

Application of a Liquid Scintillation System with 100-Ml Counting Vials for Environmental Tritium Determination: Procedure Optimization, Performance Test, and Uncertainty Analysis

Graphene-based electrochemical system for tritium enrichment

Monitoring of tritium purity during long-term circulation in the KATRIN test experiment LOOPINO using laser Raman spectroscopy

Source Term Study on Tritium in HTR-PM: Theoretical Calculations and Experimental Design

Development and calibration of a modifiable passive sampler for monitoring atmospheric tritiated water vapor in different environments

RO Film-Based Pretreatment Method for Tritium Determination by LSC.

Assessment of Tritium Behavior in Man Using a Modified Three-Compartment Model