Abstract:Improving the integrity of precast concrete (PC) frame structures using dry connections is essential for enhancing their robustness against progressive collapse. Therefore, three PC beam–column assemblies using different dry connections specially designed to ensure the connectivity were experimentally examined under progressive collapse scenarios. And a seven-point loading tree device was adopted to simulate the uniformly distributed loading conditions in practical engineering. The connection details were classified as follows: normal top-and-seat angle connection in TSA, strengthened top-and-seat angle connection in STSA, and strengthened top-and-seat angle with high ductility longitudinal reinforcements in the plastic regions in DSTSA. Under small deformations, STSA had the highest first peak load attributable to its strengthened joint connection. TSA obtained a lower load than that of STSA because of the low joint connection stiffness. Meanwhile, DSTSA achieved the lowest load among the three specimens because the smoother surface of the high-ductility reinforcements (compared with that of normal ones) weakened its bond to the concrete. However, under large deformations, the high ductility of the reinforcements ensured the specimen integrity; consequently, the largest final load was achieved in DSTSA. On the contrary, the high joint stiffness and normal reinforcements in STSA hindered the beam end rotation, and the steel angle failed early in TSA. As a result, the two connections failed to ensure the specimen integrity. To further shed light on the resistance mechanisms of beam–column assemblies under the uniformly distributed loading condition, an iteration-based model was developed to calculate the first peak load under the beam and compressive arch actions. The maximum prediction error achieved was 12%. Based on the model, the load contribution from the friction effect of the loading device was identified as 27%. And it was found that during the collapse, increasing reinforcement deformation region that might be induced by slippage between the concrete and reinforcements could lead to a continuous increase in the horizontal reaction force after the specimen reaching the first peak load.

Static load test on progressive collapse resistance of fully assembled precast concrete frame structure

Experimental Study on Progressive Collapse-Resistant Behavior of Reinforced Concrete Frame Structures

Collapse tests of RC frame with sudden middle column removal

Collapse Test of Three-Story Half-Scale Reinforced Concrete Frame Building

Experimental research on a large scale RC frame model subjected to sudden corner column removal

Experimental and numerical investigation of the progressive collapse of precast reinforced concrete frame substructures with wet connections

Experimental Study of the Horizontal Progressive Collapse of RC Frames

Analysis of Progressive Collapse Resistance in Precast Concrete Frame with a Novel Connection Method

Progressive collapse resistance of self-centering infilled precast concrete frame under side column removal scenario

Progressive collapse analysis of precast reinforced concrete beam-column assemblies with different dry connections

Progressive collapse resistance of precast concrete beam–column assemblies using dry connections under uniformly distributed loading condition

Effect of Concrete Infill Walls on the Progressive Collapse Performance of Precast Concrete Framed Substructures

Efficient numerical model for progressive collapse analysis of prestressed concrete frame structures

Progressive Collapse of Steel Moment-Resisting Frame Subjected to Loss of Interior Column: Experimental Tests

Experimental study on progressive collapse of self-centering precast concrete frame with infill walls

Multilinear model for progressive collapse response of reinforced concrete frames under penultimate column removal scenario

Testing and Analysis on Progressive Collapse-Resistance Behavior of RC Frame Substructures under a Side Column Removal Scenario

Performance of precast concrete beam-column joint with a hidden corbel under progressive collapse scenarios

Experimental Study on the Progressive Collapse Behaviour of RC Flat Plate Substructures Subjected to Corner Column Removal Scenarios

Progressive collapse resistance of prestressed concrete frame structures with infill walls considering instantaneous column failure

Progressive collapse performance analysis of precast reinforced concrete structures