Design of low bandgap tin–lead halide perovskite solar cells to achieve thermal, atmospheric and operational stability

Rohit Prasanna,Tomas Leijtens,Sean P. Dunfield,James A. Raiford,Eli J. Wolf,Simon A. Swifter,Jérémie Werner,Giles E. Eperon,Camila de Paula,Axel F. Palmstrom,Caleb C. Boyd,Maikel F. A. M. van Hest,Stacey F. Bent,Glenn Teeter,Joseph J. Berry,Michael D. McGehee

DOI: https://doi.org/10.1038/s41560-019-0471-6

IF: 56.7

2019-10-07

Nature Energy

Abstract:Low bandgap tin–lead iodide perovskites are key components of all-perovskite tandem solar cells, but can be unstable because tin is prone to oxidation. Here, to avoid a reaction with the most popular hole contact, we eliminated polyethylenedioxythiophene:polystyrenesulfonate as a hole transport layer and instead used an upward band offset at an indium tin oxide–perovskite heterojunction to extract holes. To suppress oxidative degradation, we improved the morphology to create a compact and large-grained film. The tin content was kept at or below 50% and the device capped with a sputtered indium zinc oxide electrode. These advances resulted in a substantially improved thermal and environmental stability in a low bandgap perovskite solar cell without compromising the efficiency. The solar cells retained 95% of their initial efficiency after 1,000 h at 85 °C in air in the dark with no encapsulation and in a damp heat test (85 °C with 85% relative humidity) with encapsulation. The full initial efficiency was maintained under operation near the maximum power point and near 1 sun illumination for over 1,000 h.

materials science, multidisciplinary,energy & fuels