Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

Dynamic properties of loose sand using numerical analysis-A case at Hong Thai Tay coal transportation road project (Vietnam)

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Flow Deformation and Cyclic Resistance of Saturated Loose Sand Considering Initial Static Shear Effect

Discrete Element Study on Large Strain Dynamic Characteristics of Loose Sand Under Different Loading Control Modes

EXPERIMENTAL STUDY OF INSTABILITY OF LOOSE SAND

Experimental Research On Behaviors Of Saturated Loose Sand Subjected To Oblique Ellipse Stress Path

Liquefaction of Sand under Monotonic and Cyclic Shear Conditions: Impact of Drained Preloading History

Comparison of Cyclic Liquefaction Behavior of Clean and Silty Sands Considering Static Shear Effect

EXPERIMENTAL STUDY ON DYNAMIC CHARACTERISTICS OF SANDY LOESS OF AEOLIAN SAND TO LOESS TRANSITIONAL ORIGIN

Experimental study on the dynamic properties of soft clay with sand interlayers under cyclic loading

Cyclic volumetric strain accumulation for sand under drained simple shear condition

Dynamic responses of sand-clay mixtures under long-term cyclic loading

Dynamic Flow Characteristics Of Liquefied Sand Under The Extrema Large Deformation In The Cyclic Torsional Shear Tests

Dynamic behavior of natural sand soils and fiber reinforced soils in heavy-haul railway embankment under multistage cyclic loading

Influences of particle size distribution and fines content on the excess pore water pressure generation of sand-silt mixtures under cyclic loading

Analysis on Characteristics of Dynamic p-y Curves for Soil-pile Interaction in Liquefiable Ground

Pore Water Pressure Increment Model for Saturated Nanjing Fine Sand Subject to Cyclic Loading

Research on dynamic p-y curves in liquefied sand under cyclic loading conditions

Comparison of Dnamic Properties of Saturated Sand under Unidirectional and Two-directional Cyclic Triaxial Tests Conditions