Abstract:Fused Filament Fabrication (FFF) is one of the frequently used material extrusion (MEX) additive manufacturing processes due to its ability to manufacture functional components with complex geometry, but their properties depend on the process parameters. This paper focuses on studying the effects of process parameters, namely infill density (25%, 50%, 75%, and 100%), on the mechanical and thermal response of the samples made of poly(lactic acid) (PLA) reinforced with short glass fibers (GF) produced using FFF process. To perform a comprehensive analysis, tensile, flexural, compression, differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA) tests were used. The paper also aims to manufacture by FFF process of composite structures of the fuselage section type, as structural elements of an unmanned aerial vehicle (UAV), and their testing to compression loads. The results showed that the tensile, flexural and compression strength of the additive manufactured (AMed) samples increased with the increase of infill density and therefore, the samples with 100% infill density provides the highest mechanical characteristics. The AMed samples with 50% and 75% infill density exhibited a higher toughness than samples with 100% infill. DSC analyses revealed that the glass transition (Tg), and melting (Tm) temperature increases slightly as the infill density increases. Thermogravimetric analyses (TGA) show that PLA-GF filament loses its thermal stability at a temperature of about 311 °C and the increase in fill density leads to a slight increase in thermal stability and the complete degradation temperature of the AMed material. The compression tests of the fuselage sections manufactured by FFF made of PLA-GF composite showed that their stiffening with stringers oriented at an angle of ±45° ensures a higher compression strength than the stiffening with longitudinal stringers.

Effect of Glass Fibers and Aramid Fiber on Mechanical Properties of Composite Based Unmanned Aerial Vehicle (UAV) Skin

Synthesis and Characterization of Composite Materials with Enhanced Thermo-Mechanical Properties for Unmanned Aerial Vehicles (Uavs) and Aerospace Technologies

Unmanned aerial vehicle (UAV) manufacturing materials: Synthesis, spectroscopic characterization and dynamic mechanical analysis (DMA)

The Effect of Chopped Carbon Fiber on Morphology, Electromagnetic, and Mechanical Properties of Glass/Epoxy Composites for Aerospace Application

PEMANFAATAN LIMBAH TANDAN KOSONG SAWIT (TKS) SEBAGAI MATERIAL ALTERNATIF DALAM PEMBUATAN BADAN WAHANA TERBANG TIPE FIXED WING ATHA MAPPER 2150

Rapid and Scalable Synthesis of Novel Carboxylated Aramid Nanofibers for Simultaneously Improving the Strength and Toughness of Carbon Fiber/epoxy Laminates

Characteristics of Carbon-Fiber-Reinforced Polymer Face Sheet and Glass-Fiber-Reinforced Rigid Polyurethane Foam Sandwich Structures under Flexural and Compression Tests

In-plane Permeability and Mechanical Properties of R-Glass/Aramid Hybrid Composites

Fabrication and Experimental Estimation of Mechanical Properties of Kevlar-Glass/Epoxy Interwoven Composite Laminate

Impacts of Aramid Fiber (PPTA), Glass Wool (GW), Aluminum (Al), and Silicon Carbide (SiC) Particles on Mechanical Behavior of Epoxy Hybrid Composites and their Morphological Investigation

Investigation of Thermomechanical Analysis of Carbon/Epoxy Composite for Spacecraft Structure Material

Effects of silica nanoparticles on glass and carbon fiber epoxy composites

Fused Filament Fabrication of Short Glass Fiber-Reinforced Polylactic Acid Composites: Infill Density Influence on Mechanical and Thermal Properties

Mechanical Properties of E-Glass Fiber - Basalt Fiber Reinforced Polymer Matrix Composite

Effect of energy-absorbing materials on the mechanical behaviour of hybrid FRP honeycomb core sandwich composites

Numerical Analysis of Unidirectional GFRP Composite Mechanical Response Subjected to Tension Load using Finite Element Method

Experimental investigation of the impact behavior of glass/epoxy composite materials with the natural fiber layer

Biocomposite Innovation: Assessing Tensile and Flexural Performance with Maleated Natural Rubber Additives

Analysis of the Mechanical Characteristics and Properties of a Carbon Fiber–Nylon Composite Influence of the Factors of the Fused Deposition Modeling

Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates

Flexural strength and ballistic performance of vinyl ester resin/aramid fiber composites toughened by graphene nanosheets