Abstract:A high-temperature, high-cycle fatigue test was conducted on a nickel-based single-crystal superalloy with a pore structure. Optical and scanning electron microscopy were utilized to examine the crack propagation paths and fatigue fracture surfaces at the macro and micro scales. The analysis of crack initiation and propagation related to the pore structure facilitated the development of a crack shape factor reflecting these distinct fracture behaviors. Predictions about the high-cycle fatigue stress experienced by the specimen were made, accompanied by an error analysis, providing critical insights for precise stress calculations and structural optimization in engine blade design. The results reveal that high-cycle fatigue cracks originate from corner cracks at pore edges, with the initial propagation displaying smooth crystallographic plane features. Subsequent stages show clear fatigue arc patterns in the propagation zones. The fracture surface exhibits the significant layering of oxide layers, primarily composed of NiO, with traces of CoO displaying columnar growth. AL2O3 is predominantly found at the interfaces between the matrix and oxide layers. Short and straight dislocations near the oxide layers and within the matrix suggest that dislocation multiplication and planar slip dominate the slip mechanisms in this alloy. The orientation of the fracture surface is mainly perpendicular to the load direction, with minor inclined facets in localized areas. Correlations were established between the plastic zone dimensions at the crack tips and the corresponding fatigue stresses. Without grain boundaries in single-crystal alloys, these dimensions are easily derived as parameters for fatigue stress analysis. The selected crack shape factor, "elliptical corner crack at pore edges", captures the initiation and propagation traits relevant to porous structures. Subsequent calculations, accounting for the impact of oxide layers on stress assessments, indicated an error ratio ranging from 1.00 to 1.21 compared to nominal stress values.

Deformation and fracture simulation of Ni3Al alloy under shock loads

Theoretical Calculations of the Ideal Strength of Ni, NiAl and Ni3Al in Tension and Shear

Atomistic simulations of shock-induced alloying reactions in Ni/Al nanolaminates

Molecular dynamics simulations on shock induced plasticity and stacking fault of coherent {001} Ni/Ni3Al Laminate Composite

Dynamic deformation of Al under shock loading

A Numerical Simulation of a Ni-based Bulk Metallic Glass During Compressive Deformation and Fracture

Tension-compression asymmetry in Ni/Ni 3 Al interfaces: An atomistic investigation

Research on Finite Element Simulation and Recrystallization of Laser Shock Peened Nickel-Based Single-Crystal Superalloy

Deformation-Induced Dissolution of Ni3Al Particles in Nickel: Atomistic Simulation

Shock resistance capability of multi-principal elemental alloys as a function of lattice distortion and grain size

Deformation Behavior and Constitutive Model for High Temperature Compression of a Newly Type of Ni3Al‐based Superalloy

High-Cycle Fatigue Fracture Behavior and Stress Prediction of Ni-Based Single-Crystal Superalloy with Film Cooling Hole Drilled Using Femtosecond Laser

Deformation and failure of the CrCoNi medium-entropy alloy subjected to extreme shock loading

Characterization of the Fracture of an Aluminum Alloy Anticollision-Beam to Impact Loading

Ni/Ni3Al interface-dominated nanoindentation deformation and pop-in events

Molecular dynamics simulation of the γ’ phase deformation behaviour in nickel-based superalloys

MD simulations of primary damage formation in L12 Ni3Al intermetallics

Nanostructure, Plastic Deformation, and Influence of Strain Rate Concerning Ni/Al2O3 Interface System Using a Molecular Dynamic Study (LAMMPS)

The deformation behavior and mechanism modeling of a corrosion-resistant Ni-Cr-Mo alloy with nanoscale precipitates at room and elevated temperatures

Analysis of laser shock waves and resulting surface deformations in an Al–Cu–Li aluminum alloy

RESEARCH FOR THE MECHANICS BEHAVIOR OF DD3 Ni-BASE ALLOY WITH KINEMATIC HARDENING EFFECT