Abstract:The objective of this review is to survey the development of the optimization of lyophilization. The optimization study of the lyophilizer has been roughly developing by the order of (i) trial-and-error approach, (ii) process modeling using mathematical models, (iii) scalability, and (iv) quality-by-design. From the conventional lyophilization studies based on the trial-and-error, the key parameters to optimize the operation of lyophilization were found out, i.e., critical material attributes (CMAs), critical process parameters (CPPs), and critical quality attributes (CQAs). The mathematical models using the key parameters mentioned above have been constructed from the viewpoints of the heat and mass transfer natures. In many cases, it is revealed that the control of the primary drying stage determines the outcome of the lyophilization of products, as compared with the freezing stage and the secondary drying stage. Thus, the understanding of the lyophilization process has proceeded. For the further improvement of the time and economical cost, the design space is a promising method to give the possible operation range for optimizing the lyophilization operation. This method is to search the optimized condition by reducing the number of key parameters of CMAs, CPPs, and CQAs. Alternatively, the transfer of lyophilization recipe among the lab-, pilot-, and production-scale lyophilizers (scale-up) has been examined. Notably, the scale-up of lyophilization requires the preservation of lyophilization dynamics between the two scales, i.e., the operation of lab- or pilot-scale lyophilizer under HEPA-filtrated airflow condition. The design space determined by focusing on the primary drying stage is large and involves the undesired variations in the quality of final products due to the heterogeneous size distribution of ice crystals. Accordingly, the control of the formation of the ice crystal with large size gave impact on the product quality and the productivity although the large water content in the final product should be improved. Therefore, the lyophilization should take into account the quality by design (QbD). The monitoring method of the quality of the product in lyophilization process is termed the “process analytical technology (PAT).” Recent PAT tools can reveal the lyophilization dynamics to some extent. A combination of PAT tools with a model/scale-up theory is expected to result in the QbD, i.e., a quality/risk management and an in situ optimization of lyophilization operation.

LyoPRONTO: an Open-Source Lyophilization Process Optimization Tool

Finite Element Method (FEM) Modeling of Freeze-drying: Monitoring Pharmaceutical Product Robustness During Lyophilization

Model-Based Optimisation and Control Strategy for the Primary Drying Phase of a Lyophilisation Process

Leveraging Lyophilization Modeling for Reliable Development, Scale-up and Technology Transfer

A model-based optimization strategy to achieve fast and robust freeze-drying cycles

Advanced Process Analytical Technology in Combination with Process Modeling for Endpoint and Model Parameter Determination in Lyophilization Process Design and Optimization

Optimization of Freeze-Drying Cycles of Pharmaceutical Organic Co-Solvent-Based Formulations Using the Design Space Methodology

Recent Development of Optimization of Lyophilization Process

Controlling Ice Nucleation during Lyophilization: Process Optimization of Vacuum-Induced Surface Freezing

Lyophilization of Small-Molecule Injectables: an Industry Perspective on Formulation Development, Process Optimization, Scale-Up Challenges, and Drug Product Quality Attributes

Mechanistic Modeling of Continuous Lyophilization for Pharmaceutical Manufacturing

Thermodynamic Analysis of a Freeze-Dryer Utilizing Hygroscopic Solution

Understanding and optimization of the secondary drying step of a freeze-drying process: a case study

A Simple and Cost-Effective Technique to Monitor the Sublimation Flow During Primary Drying of Freeze-Drying Using Shelf Inlet/Outlet Temperature Difference or Chamber to Condenser Pressure Drop

Digital Twin Enabled Process Development, Optimization and Control in Lyophilization for Enhanced Biopharmaceutical Production

Process development and quality attributes for the freeze-drying process in pharmaceuticals, biopharmaceuticals and nanomedicine delivery: a state-of-the-art review

Toward Polymer Product Design. I. Dynamic Optimization of Average Molecular Weights and Polydispersity Index in Batch Free Radical Polymerization

Heat Flux Analysis and Assessment of Drying Kinetics during Lyophilization of Fruits in a Pilot-Scale Freeze Dryer

Tuning, measurement and prediction of the impact of freezing on product morphology: A step toward improved design of freeze-drying cycles

Use of a Design of Experiments (DoE) Approach to Optimize Large-Scale Freeze-Thaw Process of Biologics

Strategy Exploration for Developing Robust Lyophilized Cell-Free Systems