Abstract:High entropy alloys (HEAs) are a promising class of advanced materials composed of multi-component elements that possess outstanding mechanical and corrosion properties, which enable their use in many industrial applications. However, limited studies have focused on the tribological behavior of HEAs fabricated by means of thermal spray technologies. In this study, AlCoCrFeMo equimolar HEAs were fabricated successfully using flame spraying and cold spraying techniques to determine the phase compositions, microstructures, properties, and sliding wear resistance. The results show the existence of oxides in the flame-sprayed HEA coatings due to in-flight oxidation and body-centered cubic (BCC) phases. Oxide evolutions improve the hardness of flame-sprayed HEA coatings compared to that of cold-sprayed coatings. The sliding performance was investigated at room temperature by varying the normal loads (i.e., 5 N, 10 N) and with constant sliding speed (i.e., 3.1 cm/s) using Al 2 O 3 counterface. The cold-sprayed coatings showed overall lower coefficient of friction (i.e., ∼0.5) with numerous fluctuations compared to the flame-sprayed coatings. However, the flame-sprayed coatings showed improved wear resistance when compared to HEA deposited by means of cold spray. This correlated well with the observations of ex situ analysis, which showed greater material transfer and increased formation of debris on the cold-sprayed coatings compared to the flame-sprayed coatings. The results obtained in this study suggest that flame-sprayed HEA materials are promising candidates for next-generation tribological interfaces under specific conditions, pointing to new materials designed with improved microstructural features and enhanced mechanical properties.

Mechanical Characteristics of High-Entropy Alloys and Their Constituent Metals in Friction Conditions at Low Sliding Velocities

Friction of high-entropy Fe25Cr20Ni20Mn15Co10Al10 alloy for 65G steel

Achieving low wear in a μ-phase reinforced high-entropy alloy and associated subsurface microstructure evolution

Wear Behavior of Iron Based Alloys with Different Entropy Extent Estimated by Miedema's Model

Tribological Behavior of an Amorphous Zr20Ti20Cu20Ni20Be20 High-Entropy Alloy Studied Using a Nanoscratch Technique

Molecular Dynamics Study on Wear Resistance of High Entropy Alloy Coatings Considering the Effect of Temperature

Effect of Grain Size on the Tribological Behavior of CoCrFeMnNi High Entropy Alloy

Friction Coefficient of Single-Crystal Aluminum Oxide under Low Sliding Velocity Conditions with Metal and Polymer Materials

Tribological behavior of an AlCoCrFeNi2.1 eutectic high entropy alloy sliding against different counterfaces

Room and Elevated Temperature Sliding Friction and Wear Behavior of Al0.3CoFeCrNi and Al0.3CuFeCrNi2 High Entropy Alloys

Effect of Aluminum on the Friction and Wear Behavior of AlxCrFeNi Medium‐Entropy Alloys

Sliding wear behavior of high entropy alloy coatings deposited through cold spraying and flame spraying: A comparative assessment

Dry Sliding Wear Behavior of Magnesium Alloys

Research progress on wear resistance of high entropy alloys

Evidence of Inverse Hall-Petch Behavior and Low Friction and Wear in High Entropy Alloys

The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures

Studies of high temperature sliding wear of medium carbon Nickel-Chromium based alloy steel

Subsonic-Flame-Sprayed CoCrFeNi, AlCoCrFeNi and MnCoCrFeNi-Based High-Entropy Alloy Coatings and Their Tribological Behaviors

Wear behavior of Mg–10Y–4Gd–1.5Zn–0.4Zr alloy

Worn surface and subsurface layer structure formation behavior on wear mechanism of CoCrFeMnNi high entropy alloy in different sliding conditions

Research progress of high entropy alloy: Surface treatment improves friction and wear properties