Abstract:Flexible, lightweight, and large-area solar cells provide new power supply opportunities in the renewable energy field and facilitate the supply of power to internet-of-things devices and wearable devices. The choice of printing process technologies is a key parameter for such flexible power sources because of their energy-saving process technology and high throughput rate. In addition to selecting the appropriate printing method for the active and charge transport layers, the development of printed electrodes is critical. Numerous printable materials have been developed to replace conventional evaporated top electrodes. However, achieving fully solution-processed organic photovoltaics (OPVs) with power conversion efficiency (PCE) comparable to OPVs with vacuum-deposited transparent and top electrodes is challenging. This is because of the difficulty of forming a uniform interface between the top solution-processed electrode and the active layers while preventing deterioration. In this study, an electron transport layer-free, eutectic gallium–indium (EGaIn) top-cathode strategy was developed and a record PCE of 12.7% in fully solution-processed, flexible OPVs was achieved. Direct coating of EGaIn on the active layer, in a nitrogen atmosphere, is conducive for energy band matching and obtaining physically perfect interfaces without any penetrations or voids. An average PCE of 14.1% and enhanced operating stability, comparable to conventional OPVs, were achieved with indium tin oxide transparent electrodes by eliminating the electron-transport layer. The fully solution-processed flexible OPVs fabricated with the embedded silver nanowire strategy in ultrathin transparent polyimide, achieved an average PCE of 12.7%, representing a promising technique to meet green and high-throughput energy demands.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c24235.Detailed performance of OPVs with different structures; detailed MPP operation stability and storage stability of OPVs with different structures; fabrication process of fully solution-processed OPVs; and characterizations of the transparent electrodes (PDF)This article has not yet been cited by other publications.

Slot-die processing and encapsulation of non-fullerene based ITO-free organic solar cells and modules

Design of a Rigid Scaffold Structure Toward Efficient and Stable Organic Photovoltaics

Large-Area Bilayer Organic Solar Cells: Manipulating Interface and Morphology with Solvent Drenched Slot-Die Coating

Fully Printed and Industrially Scalable Semitransparent OPV Modules: Navigating through Material and Processing Constraints

Enabling Roll-Processed and Flexible Organic Solar Cells Based On PffBT4T Through Temperature-Controlled Slot-Die Coating

Flexible OPV modules for highly efficient indoor applications

Processing Strategies for an Organic Photovoltaic Module with over 10% Efficiency

Encapsulation improvement and stability of ambient roll-to-roll slot-die-coated organic photovoltaic modules

Pathways to Upscaling Highly Efficient Organic Solar Cells Using Green Solvents: A Study on Device Photophysics in the Transition from Lab‐to‐Fab

A High-Performance Organic Photovoltaic System with Versatile Solution Processability

Solution-Processed Electron-Transport Layer-free Organic Photovoltaics with Liquid Metal Cathodes

Processing-Friendly Slot-Die-Cast Nonfullerene Organic Solar Cells with Optimized Morphology.

Highly Efficient Flexible Roll-to-Roll Organic Photovoltaics Based on Non-Fullerene Acceptors

Ambient Condition, Three‐Layer Slot‐Die Coated Organic Photovoltaics with PCE of 10%

Nonhalogenated Dual‐Slot‐Die Processing Enables High‐Efficiency Organic Solar Cells

Non-Halogenated Solvents Processed Efficient ITO-Free Flexible Organic Solar Cells with Upscaled Area

Processability Considerations for Next‐Generation Organic Photovoltaic Materials

High-speed sequential deposition of photoactive layers for organic solar cell manufacturing

High‐Performance Large‐Area Organic Solar Cells Enabled by Sequential Bilayer Processing via Nonhalogenated Solvents

Utilizing Metal Oxide Thin Films for Device Engineering of Solution-Processed Organic Multi-Junction Solar Cells