Abstract:The n -butyltin(IV) trichloride ( n BuSnCl 3 ) initiator was successfully utilized in the ring-opening polymerization (ROP) of ε -caprolactone ( ε -CL) under solvent-free conditions. Its reactivity was investigated by the non-isothermal differential scanning calorimetry (DSC). Effect of n BuSnCl 3 concentration on the ROP of ε -CL was investigated by the Kissinger and model fitting methods. The obtained activation energy ( E a ) values for the ROP of ε -CL with 1.0 mol% of n BuSnCl 3 were higher than 2.0, and 4.0 mol%, respectively. Furthermore, the degree of aggregation ( m ) of n BuSnCl 3 in the ROP of ε -CL was determined by the DSC technique. From the obtained m values at 120 and 140 °C, n BuSnCl 3 presented in a non-aggregated state in the non-isothermal ROP of ε -CL. The performance of n BuSnCl 3 was also compared with the di- n -butyltin(IV) dichloride ( n Bu 2 SnCl 2 ) and tri- n -butytlin(IV) chloride ( n Bu 3 SnCl). The number of chloride and n -butyl groups adjacent to the Sn active center significantly affected the solvent-free ROP of ε -CL. From the non-isothermal DSC measurement, the polymerization exotherms for the ROP of ε -CL with n BuSnCl 3 occurred and were completed at a lower temperature range than n Bu 2 SnCl 2 , and n Bu 3 SnCl, respectively. The E a value for the ROP of ε -CL initiated by n Bu 3 SnCl was higher than n Bu 2 SnCl 2, and n BuSnCl 3 , respectively. The values of pre-exponential factor (ln A ) for the ROP of ε -CL initiated by n Bu 3 SnCl, n Bu 2 SnCl 2, and n BuSnCl 3 were determined from the first order reaction model fitting ( f ( α ) = 1− α ) and compensation effect. The kinetics data demonstrated that the reactivity of n BuSnCl 3 was higher than n Bu 2 SnCl 2, and n Bu 3 SnCl due to the lowest steric hindrance and the highest Lewis acidity of n BuSnCl 3 . Larger-scale (250 g) polymerization of ε -CL was preliminarily investigated by using the highly reactive n BuSnCl 3 initiator. n BuSnCl 3 could effectively produce PCL with weight average molecular weight ( M w ) of 7.1 × 10 4 g/mol and 82% yield at 150 °C for 24 h. The probable mechanism of the ROP of ε -CL with n Bu 3 SnCl was proposed via the coordination-insertion mechanism.

Influence of butyl group of tin chloride initiators on the non-isothermal DSC ring-opening polymerization of ε-caprolactone: The studies of kinetics, mechanism and polymer synthesis

Highly active tridentate amino-phenol zinc complexes for the catalytic ring-opening polymerization of ε-caprolactone

Zinc Complexes Supported by (benzimidazolyl)pyridine Alcohol Ligands As Highly Efficient Initiators for Ring-Opening Polymerization of Ε-Caprolactone

n-Butyltin(IV) trichloride initiator for the solvent-free ring-opening polymerization of ε-caprolactone: evaluation of the structure-reactivity relationship of tin(IV) derivatives

Synthesis of Cyclic and Linear Block Copolyesters via Ring-opening Copolymerization of epsilon-Caprolatone and L-Lactide Catalyzed by Zinc Complex

Solvent-free ring-opening polymerization of ε-caprolactone initiated by Mg(II), Sn(II), Zn(II), Al(III), and Sn(IV) derivatives: a comparative study

Kinetics of Sn(Oct)2-catalyzed Ring Opening Polymerization of Ε-Caprolactone

Dibutyltin(IV) maleate as a new effective initiator for the ring-opening polymerization of ε-caprolactone: the non-isothermal kinetics, mechanism, and initiator’s performance in polymer synthesis

The homoleptic bis(β-quinolylenolate) zinc catalysts for the ring-opening polymerization of ε-caprolactone: Kinetics and mechanism

Ring-opening Polymerization of Cyclic Esters Mediated by Zinc Complexes Coordinated with Benzotriazo-Based Imino-Phenoxy Ligands

Lanthanum Heterocyclic Schiff-base Complex Initiated Ring-Opening Polymerization of Ɛ-Caprolactone

Controlled Ring-opening Polymerization of ε-Caprolactone Initiated by in situ Formed Yttrium Tribenzyloxide Complex

Ring-opening Polymerization Reaction Mechanism of ε-Caprolactone Catalyzed by Bis(dibenzoylmethanato) zirconium(IV) Using PM3 Semi-Empirical Method

Organocatalytic Ring-Opening Polymerization of ε-Caprolactone Using bis(N-(N′-butylimidazolium)alkane Dicationic Ionic Liquids as the Metal-Free Catalysts: Polymer Synthesis, Kinetics and DFT Mechanistic Study

Controlled Ring-opening Polymerization of epsilon-Caprolactone Initiated by in situ Formed Yttrium Tribenzyloxide Complex

Characteristics and Kinetics of Ring-opening Polymerization of ε-Caprolactone Initiated by Lanthanide Tris(2,4,6-trimethylphenolate)s

Characteristics, Kinetics And Mechanism Of Epsilon-Caprolactone Polymerization By Lanthanide Tris(2.6-Dimethylphenolate)S

Characteristics, Linetics and Mechanism of ε-Caprolactone Polymerization by Lanthanide Tris(2.6-dimethylphenolate)s

Microwave assisted ring-opening polymerization of Ɛ-caprolactone using organic acids

Preparation and Polymerization Mechanism of Dihydroxy-Capped PCL, Poly(cl- B -PEG- B -CL) and Poly(dtc- B -CL- B -DTC)

The Reaction Mechanism of Ring-opening Polymerization of ε-Caprolactone Using Bis(benzoylacetonato)zirconium(IV) Catalyst With PM3 Semi-Empirical Method