Abstract:This study investigates the performance of hydrophobic membrane contactors (HMC) for the recovery of dissolved ammonia (NH 3 ) from natural rubber processing (NRP) wastewater during short- and long-term operation. The results show that 90% recovery of total NH 3 nitrogen can be achieved. In the short-term operations, the increases in the wastewater velocity and pH enhanced the NH 3 desorption overall mass transfer coefficient (K OV ), but the increase in the number of total solids in the wastewater reduced the K OV . The Wilson plot method confirmed the significance of the mass transfer resistance of the wastewater phase for NH 3 desorption. The long-term operation revealed that the K OV was kept constant for 15 days and then declined owing to membrane fouling. Flushing using water (physical cleaning) could not restore the K OV to its initial value, but a series of chemical cleanings with 0.1M NaOH and 0.1 M HCl solution successfully recovered the K OV . The comparison of cleaning solutions in the foulant extraction's ability showed that 0.1 M NaOH was the most potent, followed by 0.1 M HCl and water. Fouling characterization using scanning electron microscopy and energy dispersive X-ray spectrometry (SEM/EDS) and the Fourier transform infrared spectroscopy revealed a cake layer covering the membrane surface, and the foulants consisted of organic compounds composed of proteins from natural rubber (NR) particles and inorganic salts. The hydrophobic interaction of the proteins covering the NR particles allowed the natural rubber particles to be deposited on the membrane surface, even without hydraulic pressure in HMC. The negative charge of the NR particles could also interact with ions, leading to the formation of inorganic components in the fouling cake layers. Two types of fouled membrane surfaces were identified via SEM/EDS: a smooth area, which consisted of N-atom from proteins, and a rugged area with small conglomerate particles in which no N-atoms were observed.

Evaluation of key factors for residual rubber coagulation in natural rubber processing wastewater

Enhancing Rubber Industry Wastewater Treatment through an Integrated AnMBR and A/O MBR System: Performance, Membrane Fouling Analysis, and Microbial Community Evolution

TREATMENT OF AN ALKALINE BUTYL RUBBER WASTEWATER BY THE PROCESS OF COAGULATION AND FLOCCULATION HYDROLYSIS ACIDIFICATION - BIOLOGICAL CONTACT OXIDATION - MBR

Experimental Approach for Chemical Oxygen Demand and Ammonia Nitrogen Removal from Natural Rubber Wastewater via Adsorption by Kaolin

Synchronised removal of nitrogen and sulphate from rubber industrial wastewater by coupling of Sulfammox and sulphide-driven autotrophic denitrification in anaerobic membrane bioreactor

Treatment of alkaline wastewater from synthetic rubber production by coagulation and biological contact oxidation

Biodegradation of vulcanized natural rubber by enriched bacterial consortia

Investigation of the Depolymerization Process of Hydrothermal Gasification Natural Rubber with ReaxFF-MD Simulation and DFT Computation

Investigation of potential rubber-degrading bacteria and genes involved

Treatment of low-pH rubber wastewater using ureolytic bacteria and the production of calcium carbonate precipitate for soil stabilization

Ammonia recovery from natural rubber processing wastewater by hollow fiber membrane contactors: Mass transfer in short- and long-term operations and fouling characteristics

Aerobic granules cultivated using industrial rubber wastewater: Effect of size distribution and Performance of granules.

Treatment of rubber industry wastewater review: Recent advances and future prospects

Effect of HRT on performance of anaerobic baffled reactor for printing and dyeing wastewater

An environmentally friendly and efficient technology to prepare high‐performance natural rubber: Electrophoretic coagulation

Nitrogen removal crash of denitrification in anaerobic biofilm reactor due to dissimilatory nitrate reduction to ammonium (DNRA) for tofu processing wastewater treatment: Based on microbial community and functional genes

Efficiency and bacterial diversity of an improved anaerobic baffled reactor for the remediation of wastewater from alkaline-surfactant-polymer (ASP) flooding technology

Identification of organic pollutants and heavy metals in natural rubber wastewater and evaluation its phytotoxicity and cytogenotoxicity

Thermo-oxidative degradation behavior of natural rubber vulcanized by different curing systems

Microbial Degradation of Rubber: Actinobacteria

Combined use of ecotoxicity tools and physicochemical analysis for evaluating potential toxicity of treated natural rubber processing effluents and receiving waters