Abstract:Significant endeavours have been undertaken to advance the development of eco-friendly, abundant, cost-effective, and high-performance cathode materials for lithium-ion batteries. Among the various contenders for next-generation energy storage systems, spinel LiNi 0.5 Mn 1.5 O 4 has emerged as a leading high-voltage cathode candidate, owing to its aforementioned benefits. Nonetheless, the widespread adoption of LNMO-based lithium-ion batteries is substantially impeded by the electrochemical instability of conventional carbonate electrolytes above 4.5 V. High-voltage cycling of such batteries results in rapid capacity degradation and metal-ion dissolution from the LNMO electrode into the electrolyte, particularly at elevated temperatures, further causing deposition of metal-ions on anode electrode. Therefore, stabilizing the electrode/electrolyte interface is crucial to achieve improved electrochemical performance of the Li-ion cell at high voltages. The utilization of sacrificial electrolyte additives is regarded as a straightforward and efficacious method to accomplish this objective. These additives form a protective layer on the cathode surface, mitigating electrolyte decomposition and transition metal-ion dissolution and deposition on anode’s surface. Various additives facilitating high-voltage cathode materials have been documented, encompassing fluorides and sulfonates. However, borate salt-containing additives are particularly promising within this context. In the present study, we endeavour to elucidate the surface modifications transpiring on the electrode’s surface when minute quantities of borate-based salt are employed as an additive in the conventional EC:EMC electrolyte for high-voltage operation. We explored the impact of the additive salt in a standard LiPF 6 -EC/EMC base electrolyte on the discharge capacity and rate performance of the LiNi 0.5 Mn 1.5 O 4 /Graphite based Li-ion cell. The electrochemical behaviour, morphological behaviour, and electrode-electrolyte interphase layer stability on the electrode were meticulously examined using high-resolution transmission electron microscopy (HR-TEM), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). These characterisations conformed the presence of an electrode-electrolyte interface forming a thin-layer via the sacrificial decomposition of the utilised additive. The introduction of this salt exhibits favourable effects on enhancing the electrochemical performance of the LiNi 0.5 Mn 1.5 O 4 /Graphite in high-voltage lithium-ion batteries. Notably, the utilised additive excels in mitigating irreversible capacity loss and reducing cycling fade, as it preferentially decomposes and forms a conductive, protective film that impedes subsequent electrolyte decomposition, thereby substantially enhancing cell performance.

Ethylviologen Hexafluorophosphate as Electrolyte Additive for High-Voltage Nickel-Rich Layered Cathode

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Additive Engineering for Robust Interphases to Stabilize High-Ni Layered Structures at Ultra-High Voltage of 4.8 V

Dimethyl Sulfide Electrolyte Additive Enabled High-Voltage Lithium-Ion Battery

Outstanding electrochemical performance of high-voltage LiNi1/3Co1/3Mn1/3O2 cathode achieved by application of LiPO2F2 electrolyte additive

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Improving the Cycling Performance of High-Voltage NMC111 || Graphite Lithium Ion Cells by an Effective Urea-Based Electrolyte Additive

Triphenylphosphine Oxide as Highly Effective Electrolyte Additive for Graphite/NMC811 Lithium Ion Cells

Functionality Selection Principle for High Voltage Lithium-ion Battery Electrolyte Additives

Electrolyte Optimization to Improve the High-Voltage Operation of Single-Crystal LiNi0.83Co0.11Mn0.06O2 in Lithium-Ion Batteries

Anionic Additive-Integrated Electrolyte Therapy: Enhancing High-Voltage Stability and Performance in Lithium-Ion Batteries

Nonsacrificial Nitrile Additive for Armoring High-Voltage LiNi0.83 Co0.07 Mn0.1 O2 Cathode with Reliable Electrode-Electrolyte Interface toward Durable Battery.

Enhanced Electrochemical Performance of Ni‐Rich Layered Cathode Materials by Using LiPF6 As a Cathode Additive

Improved High-Voltage Performance of LiNi 1/3 Co 1/3 Mn 1/3 O 2 Cathode with Tris(2,2,2-trifluoroethyl) Phosphite As Electrolyte Additive

Enhanced High-Voltage Cyclability of LiNi0.5Co0.2Mn0.3O2-based Pouch Cells Via Lithium Difluorophosphate Introducing As Electrolyte Additive

Ethylene Carbonate‐Free Electrolytes for High‐Nickel Layered Oxide Cathodes in Lithium‐Ion Batteries

A Hydridoaluminate Additive Producing a Protective Coating on Ni‐Rich Cathode Materials in Lithium‐Ion Batteries

LiPO2F2 electrolyte additive for high-performance Li-rich cathode material

Stabilizing Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode by generating ion-conductive polymer coating layer with 1, 3-dioxolane introducing electrolyte for lithium-ion batteries

Multifunctional Electrolyte Additive for High-Nickel LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes of Lithium-Metal Batteries