Abstract:The production of green hydrogen is a promising alternative to fossil fuels. The current study focuses on the design of microalgae as a catalyst in bioelectrochemical systems for the generation of biohydrogen. Furthermore, the abovementioned target could be achieved by optimizing different parameters, including strains of microalgae, different optical filters, and their shapes. Synechocystis sp. PAK13 (Ba9), Micractinium sp. YACCYB33 (R4), and Desmodesmus intermedius (Sh42) were used and designed as free cells and immobilized microalgae for evaluating their performance for hydrogen production. Alginate was applied for immobilization not only for protecting the immobilized microalgae from stress but also for inhibiting the agglomeration of microalgae and improving stability. The amount of studied immobilized microalgae was 0.01 g/5 ml algae-dissolved in 10 ml alginate gel at 28 °C, 12 h of light (light intensity 30.4 μmol m-2 s-1), and 12 h of darkness with continual aeration (air bump in every strain flask) at pH = 7.2 ± 0.2 in 0.05 %wuxal buffer which has 3.7 ionic strength. Different modalities, including FTIR, UV, and SEM, were performed for the description of selected microalgae. The surface morphology of Ba9 with alginate composite (immobilized Ba9) appeared as a stacked layer with high homogeneity, which facilitates hydrogen production from water. The conversion efficiencies of the immobilized microalgae were evaluated by incident photon-to-current efficiency (IPCE). Under optical filters, the optimum IPCE value was ∼ 7 % at 460 nm for immobilized Ba9. Also, its number of hydrogen moles was calculated to be 16.03 mmol h-1 cm-2 under optical filters. The electrochemical stability of immobilized Ba9 was evaluated through repetitive 100 cycles as a short-term stability test, and the curve of chrono-amperometry after 30 min in 0.05 %wuxal at a constant potential of 0.9 V for 30 min of all studied samples confirmed the high stability of all sample and the immobilized Ba9 has superior activity than others.

Optimization of biohydrogen production from microalgae by response surface methodology (RSM)

Optimization of photofermentative biohydrogen production in a mixed volatile fatty acid medium by Rhodobacter sp. MAY2: A response surface methodology (RSM) approach

Optimization of key variables for the enhanced production of hydrogen by Ethanoligenens harbinense W1 using response surface methodology

Adaptive Network Fuzzy Inference System and Particle Swarm Optimization of Biohydrogen Production Process

Biohydrogen Production from Microalgae for Environmental Sustainability.

Response Surface Methodological Analysis on Biohydrogen Production by Enriched Anaerobic Cultures

Strategies to enhance biohydrogen production from microalgae: A comprehensive review

Optimization of Rhamnolipid Hydrolysis Conditions Using Response Surface Methodology

A kinetic modeling and energy conversion evaluation of biohydrogen production using a co-culture of green microalgae and wastewater activated sludge

Optimization of microalgal biomass (Scenedesmus dimorphus) for maximized bioethanol production through response surface methodology (RSM)

Optimization of Biohydrogen Production with Biomechatronics

Catalytic Gasification of Algal Biomass for Hydrogen-Rich Gas Production: Parametric Optimization Via Central Composite Design

Co-cultivation of microalgae and bacteria for optimal bioenergy feedstock production in wastewater by using response surface methodology

Hydrogen production via integrated configuration of steam gasification process of biomass and water‐gas shift reaction: Process simulation and optimization

Optimizing Algal Oil Extraction and Transesterification Parameters through RSM, PCA, and MRA for Sustainable Biodiesel Production

Biohydrogen production from wastewater-based microalgae: Progresses and challenges

New insights into enhancement of bio-hydrogen production through encapsulated microalgae with alginate under visible light irradiation

Determining Optimum Conditions for Hydrogen Production from Glucose by an Anaerobic Culture Using Response Surface Methodology (Rsm)

STATISTICAL OPTIMIZATION OF PROCESS PARAMETERS FOR HYDROGEN PRODUCTION IN Halobacterium salinarium IMMOBILIZED WITH CALCIUM ALGINATE AND Escherichia coli

Optimization of Culture Conditions for Hydrogen Production by Ethanoligenens Harbinense B49 Using Response Surface Methodology

Optimization of Hydrogen Production by Response Surface Methodology Using Γ-Irradiated Sludge As Inoculum