Abstract:Non-autoclaved aerated concrete (NAAC) is a two-phase material with a concrete matrix and air, exhibits good thermal insulation performance and shows good potential in the insulating construction industry. In this study, recycled concrete fine powder was used as an auxiliary cementing material, and the NAAC with different porosity and distribution was fabricated by the non-autoclaved method at different curing temperatures. The effect of porosity on the thermal conductivity and mechanical strength of NAAC is analyzed by experimental tests. A prediction method of thermal conductivity combining pore structure reconstruction and numerical simulation was proposed, which is established by two steps. Firstly, the pore size distributions of NAAC with different porosities were characterized by stereology image analyses. Secondly, the thermal conductivity prediction model based on the pore structure information was established by a COMSOL steady-state heat transfer module. The thermal conductivity results of COMSOL simulations were compared with the experiments and other theoretical models to verify the reliability of the model. The model was used to evaluate the effect of porosity, pore size distribution and the concrete matrix's thermal conductivity on the thermal conductivity of NAAC; these are hard to measure when only using laboratory experiments. The results show that with the increase in curing temperature, the porosity of NAAC increases, and the number and volume proportion of macropores increase. The numerical results suggest that the error between the COMSOL simulations and the experiments was less than 10% under different porosities, which is smaller than other models and has strong reliability. The prediction accuracy of this model increases with the increase in NAAC porosity. The steady thermal conductivity of NAAC is less sensitive to the distribution and dispersion of pore size in a given porosity. With the increase in porosity, the thermal conductivity of NAAC is linearly negatively correlated with that of the concrete matrix, and the correlation is close to 1.

New Method for Diagnostic of Heat Engineering and Mechanical Properties of Cellular Concrete

Experimental determination and fractal modeling of the effective thermal conductivity of autoclaved aerated concrete: Effects of moisture content

Thermal Conductivity of Silica-aerogel (SA) and Autoclave Aerated Concrete (AAC) Composites

An experimental investigation and fractal modeling on the effective thermal conductivity of novel autoclaved aerated concrete (AAC)-based composites with silica aerogels (SA)

OPTIMIZATION OF RECEPTURAL-TECHNOLOGICAL PARAMETERS OF MANUFACTURE OF CELLULAR CONCRETE MIXTURE

PERFORMANCES OF HIGH POROUS CELLULAR CONCRETE

Automatic Image Analysis Method as a Tool to Evaluate the Anisotropy of Autoclaved Aerated Concrete for Moisture and Heat Transport

Effective thermal conductivity of moist aerated concrete with different porosities

An experimental and theoretical approach to assessing the structure of fine-grained modified concretes

High-Strength and Heat-Insulating Cellular Building Concrete Based on Calcined Gypsum

A new method to determine thermophysical properties of PCM-concrete brick

The influence of measurement conditions on the determined values of thermal parameters of different types of concrete

Insulation Foam Concrete Nanomodified with Microsilica and Reinforced with Polypropylene Fiber for the Improvement of Characteristics

Simulation and Experimental Substantiation of the Thermal Properties of Non-Autoclaved Aerated Concrete with Recycled Concrete Powder

Energy-efficient double-row masonry of the exterior walls in the buildings made of cellular concrete blocks

Investigation of the effect of electric heating of expanded clay concrete mixture on the structure and properties of lightweight expanded clay concrete exposed to high temperatures

Experimental Investigation and Image Processing to Predict the Properties of Concrete with the Addition of Nano Silica and Rice Husk Ash

EFFECT OF POROUS STRUCTURE ON SOUND ABSORPTION OF CELLULAR CONCRETE

Strength of cellular concrete as a function of density under axial uniaxial compression

Experimental Contribution to Study the Physico-Mechanical and Thermal Properties of Lightweight Cellular Concrete Prepared With Different Types of Sand and Waste Marble Powder

Investigation of Hydrophysical Properties and Corrosion Resistance of Modified Self-Compacting Concretes