Abstract:Wastewaters from petrochemical plants are of two types: high sulfur wastewater with high levels of sulfur, oil, chemical oxygen demand (COD) and phenol; and high ammonia-nitrogen wastewater emanating from catalyst workshops, which contains large concentrations of ammonia-nitrogen, salinity, suspended solids (SS) and lower organic pollutants.Conventional biological treatments are expensive and not very effective at handling both kinds of wastewater stream. In this paper, a new aerobic biological fluidized bed technology (ABFT) process is proposed, whereby a mixture of the two kinds of wastewater is treated. A pilot experiment has been conducted to examine the feasibility of treating the mixed wastewater stream. In the experiment, the initial mean concentrations of contaminants in the mixed wastewater are: COD = 2090mg · L-1, NH4+-N = 600mg · L-1, volatile phenol = 27mg · L-1,and sulfide = 154mg · L-1. After treatment by the ABFT process, the mean concentrations are as follows: COD =95mg · L-1, NH4+-N =4.0mg · L-1, volatile phenol 0. 30mg · L-1 and sulfide 0. 0067mg · L-1. The results meet the demands of China's National First-grade Standard for Integrated Wastewater Discharge. In the ABFT process, methods of dynamic oxidation, mixing and sedimentation are applied to wastewater pretreatment, with the use of immobilized microorganisms on a patented synthesized polymer carrier providing the core technology. The carrier employed as fluidized media in the ABFT reactor has a porous reticular structure, and it exhibits excellent mechanical strength and chemical characteristics.Highly efficient B350 microorganisms have been selected that can be immobilized on the carrier by chemical bonds. The Kjeldahl-Gunning test for nitrogen determination indicates that the mean average immobilized biomass on the carrier is 32g · L-1 (H2O). Experimental investigations show that the proposed ABFT process has overwhelming advantages over the conventional sequencing biological reactor (SBR) process, particularly with regard to treatment of high ammonia-nitrogen wastewater. Meanwhile, the treatment efficiency and the resistance capacity against sudden changes in loading are both significantly increased.

Effective treatment of residue of acrylic acid production using a fluid‐bed/fixed‐bed system with low energy consumption

High-efficiency treatment of benzaldehyde residue using two-stage fluidized-bed/fixed-bed catalytic system

Treatment of wastewater from acrylonitrile–butadiene–styrene (ABS) resin manufacturing by Fe0/GAC–ABFB

Laboratory trial and full-scale implementation of integrated anaerobic-aerobic treatment for high strength acrylic acid wastewater

Complex extraction and stripping of H acid wastewater

Efficient advanced treatment of coking wastewater using O3/H2O2/Fe-shavings process

Production of Acrylic Acid Via Catalytic Partial Oxidation of Propylene in a Two-stage Fluidized Bed

Organics, sulfates and ammonia removal from acrylic fiber manufacturing wastewater using a combined Fenton-UASB (2 phase)-SBR system

Aerobic Biological Fluidized Bed Technology Treatment of Sulfur and High Ammonia-nitrogen Wastewater in a Petroleum Refinery

The treatment of high concentration wastewater in the natural gas processing industry

Purification of High Strength Wastewater Originating from Bioethanol Production with Simultaneous Biogas Production

Removal of Organic Pollutants in Tannery Wastewater from Wet-Blue Fur Processing by Integrated Anoxic/Oxic (A/O) and Fenton: Process Optimization

Efficient removal of acetic acid by a regenerable resin-based spherical activated carbon.

Enhanced removal of refractory organic pollutants in wafer surface treatment wastewater by combining Fenton oxidation and O 3 /H 2 O 2 /FeOOH: Removal efficiency, intermediate composition, and toxicity prediction

Treatment of aircraft maintenance wastewater by coupling low-temperature evaporation with Fe–C micro-electrolysis-configured ozonation

Treatment of wastewater from acrylonitrile industries with combined processes of adsorption oxidation, nanofiltration and adsorption

Treatment of Wastewater in Butyl and Isooctyl Alcohol Production by Acidification-Extraction Process

Treatment of the Refinery Wastewater in a Gas–liquid–solid Three‐phase Flow Airlift Loop Bioreactor

Advanced Treatment of Low-Pollution and Poor Biodegradability Sewage by Combined Process

Treatment of mixed chemical wastewater by a two-stage A/O process for elimination of COD nitrogen and toxic matters

Supercritical Water Oxidation of Acrylic Acid Production Wastewater