Abstract:The effect of nozzle surface features on the overall atomization behavior of a liquid jet is analyzed in the present computational work by adopting three representative geometries, namely a single X-ray tomography scan of the Engine Combustion Network’s Spray A nozzle (Unprocessed), a spline reconstruction of multiple scans (Educated), and a purely external flow configuration. The latter configuration is often used in fundamental jet atomization studies. Numerically, the two-phase flow is solved based on algebraic volume-of-fluid methodology utilizing the OpenFoam solver, interFoam. Quantitative characterization of the surface features concerning the first two geometries reveals that while both of them have similar levels of cylindrical asymmetries, the nozzle configuration pertaining to the Unprocessed geometry has much larger surface features along the streamwise direction than the Educated geometry. This produces for the Unprocessed configuration a much larger degree of non-axial velocity components in the flow exiting the orifice and also a more pronounced disturbance of the liquid surface in the first few diameters downstream of the nozzle orifice. Furthermore, this heightened level of surface destabilization generates a much shorter intact liquid core length, that is, it produces faster primary atomization. The surprising aspect of this finding is that the differences between the Unprocessed and Educated geometries are of [Formula: see text](1) μm, and they are able to produce [Formula: see text](1) mm effects in the intact liquid core length. In spite of more pronounced atomization for the Unprocessed geometry, the magnitude of the turbulent liquid kinetic energy is roughly the same as the Educated geometry. This highlights the important role of mean field quantities, in particular, non-axial velocity components, in precipitating primary atomization. At the other end of the spectrum, the external-only configuration has the mildest level of surface disturbances in the near field resulting in the longest intact liquid core length.

Two-Phase Flow Simulation of High-Pressure Gas Atomization: Effect of Molten Metal and Atomizing Gas Properties on Droplet Size Distribution

Three-Dimensional Simulation Of Effervescent Atomization Spray

Simulation of Supersonic High-Pressure Gas Atomizer for Metal Powder Production

Simulation of Droplet-gas Flow in the Effervescent Atomization Spray with an Impinging Plate

Theoretical Investigation of the Influence of Liquid Physical Properties on Effervescent Atomization Performance

EFFECTS OF LIQUID PROPERTIES ON DROP MEAN DIAMETER IN EFFERVESCENT ATOMIZATION SPRAY

Examination of Appropriate Formulations for Velocity and Pressure Calculation Methods at Interfacial Region on Collocated Physical Variables' Distribution

Appropriate Formulations for Velocity and Pressure Calculations at Gas-liquid Interface with Collocated Variable Arrangement

Numerical investigation on flow process of liquid metals in melt delivery nozzle during gas atomization process for fine metal powder production

Investigation on the Influence of Pressure on Enhancing Atomization Effect of Molten Metal Stream

Numerical Simulations of Molten Breakup Behaviors of a de Laval-Type Nozzle, and the Effects of Atomization Parameters on Particle Size Distribution

The effect of nozzle internal flow on spray atomization

Numerical Models For Viscoelastic Liquid Atomization Spray

A numerical modeling framework for predicting the effects of operational parameters on particle size distribution in the gas atomization process for Nickel-Silicon alloys

Modelling the Flow Conditions and Primary Atomization of an Air-Core-Liquid-Ring (ACLR) Atomizer Using a Coupled Eulerian–Lagrangian Approach

A detailed numerical investigation of two-phase flows inside a planar flow-blurring atomizer

Atomization and droplet dynamics of a gas-liquid two-phase jet under different mass loading ratios

The atomizing pulsed jet

Interaction between high-velocity gas and liquid in gas atomization revealed by a new coupled simulation model

Numerical simulation of three-dimensional transient flow characteristics for a dual-fluid atomizer

Numerical Study of Internal Two-Phase Flow Characteristics of an Outside-In-Liquid Atomizer