Abstract:The oil and gas industry plays a vast and vital role in our society. Despite the numerous benefits of the production of crude oil, its activities pose a lot of dangers to the environment and living organisms because it generates a huge volume of solid and liquid wastes, thus, these wastes require treatment before disposal. The major drilling wastes are drilling muds, drilling cuttings, and obnoxious gas emissions. Parameters that should be considered during the disposal of decontaminated drilling muds and drill cuttings are heavy metals. These wastes are introduced into the environment through accidental spills as well as intentional discharge. The discharge into the environment has effects on humans, plants, birds, soil, and also aquatic life. Generally, oil based drilling fluid usage and disposal are not preferable. However, water based drilling fluid and synthetic based drilling fluid can be a technically and economically disposed because they are biodegradable. Generally, drilling waste disposal options are offshore disposal, onshore disposal and drill cuttings re-injection. Zero discharge can achieved by drill cuttings re-injection. However extensive study must be carried before drill cuttings can be re-inject to the formation. Disposal options must be evaluated based on economics, environment and operational aspects. This study aimed at evaluating the heavy metals present in the drilling fluid waste and drilling cuttings. The experiment was achieved with the aid of a Flame Atomic Absorption Spectrophotometer (FAAS). Upon the investigation, it was discovered that lead concentration in drilling cuttings was the highest with the concentration of 1,058.9 mg/l and drilling fluid was 190.3 mg/l whereas NUPRC limit is 5 mg/l; the total chromium concentration in drilling cuttings was 19.16 mg/l and drilling fluid was 8.38 mg/l whereas NUPRC limit is 8 mg/l; zinc was 58.10 mg/l in drilling cuttings while in drilling fluid it was 23.96 mg/l whereas NUPRC limit is 50 mg/l; silver concentration in drilling cuttings was 14.67 mg/l and drilling fluid 0.91 mg/l whereas NUPRC limit is 5 mg/l; Cadmium concentration in drilling cuttings was 2.17 mg/l and drilling fluid was 1.36 mg/l whereas NUPRC limit is 1 mg/l. In no doubt. The study has shown that disposal of this drilling fluid waste and drilling cutting directly into the environment without treatment will be detrimental to the living organisms and therefore should be discouraged.

A Field Study on the Marine Environmental Impact of the Drilling Fluid’s Discharge

Numerical Analysis of Effect on Nearby Waters by Ship Building-Repairing Located on Xiancaotan

Evaluation Indexes of Environmental Protection and a Novel System for Offshore Drilling Fluid

Numerical Analysis Impact of Ship Building & Repairing on Surrounding Waters

Marine Water Quality Assessment Of Synthetic-Based Drilling Waste Discharges

Environmental impact assessment of oilfield upgrades in Bohai Sea

Environmental and living organisms’ disaster caused by discharge of drilling fluid waste

Treatment of drilling fluid waste during oil and gas drilling: a review

Numerical Simulation of Transport and Dispersion of Suspended Matter Due to Dredged Sediment Disposal into Large Marine Dumping Area

Regulations and methods for disposal of waste drilling fluid

Oil Based Drilling Fluid Waste: An Overview on Environmentally Persistent Pollutants

Numerical Study of Leakage and Diffusion of Underwater Oil Spill by Using Volume-of-Fluid (VOF) Technique and Remediation Strategies for Clean-Up

Study on Reasonable Amount of Flushing Fluid and Flushing Time

Impact of ocean waves on transport of underwater spilled oil in the Bohai Sea

Effects of oilfield-produced water discharge on the spatial patterns of microbial communities in arid soils

Development and Performance Evaluation of a Deep Water Synthetic Based Drilling Fluid System

Development of advanced oil/water separation technologies to enhance the effectiveness of mechanical oil recovery operations at sea: Potential and challenges

Field study on endogenous perfluoroalkyl acid release and their spatiotemporal distribution processes induced by inland navigation

Construction and Application of Flocculation and Destability System of Biodrill-A Drilling Fluid in Bohai Oilfield

Analysis of Development Status of High Performance Water-based Drilling Fluid

Numerical Simulation of Oily Wastewater Contamination of Subsurface Soil and Phreatic Aquifer