Abstract:Abstract One of the biggest challenges when drilling in deep water is the excessive dependence of drilling fluid rheological properties on temperature. Conventional drilling fluids often have high viscosity at the seabed temperature, which increases the Equivalent Circulating Density (ECD) and surge pressures when running pipe or initiating circulation, elevating the risk of fracturing the wellbore. This paper describes the development of a drilling fluid for deep-water applications, with minimum viscosity variation with temperature. Multiple laboratory formulations were evaluated during the development of the new, non-aqueous based drilling fluid that meets deep-water's challenging rheological and barite suspension requirements. CaCl2 brine was used as the internal emulsion phase, and synthetic isomerized olefin as the base oil. The testing followed the API Recommended Practice for Field Testing Oil-based Drilling Fluids. Samples were aged at dynamic conditions for 16 hours at several temperatures. Then, rheological properties and high-pressure high-temperature (HPHT) fluid loss, emulsion stability, and dynamic sagging were tested. Static sag experiments were also carried out for up to seven days together with improved step down rheology tests. A low-impact, non-aqueous drilling fluid (LIDF) was designed to minimize ECD increases by reducing the effect of cold temperature on the fluid viscosity. The fluid offers a superior low viscosity profile and rapid-set, easy-break gel strengths, while maintaining low shear rate viscosity at high temperatures with optimal weight material suspension. The fluid is also compatible with all contaminants usually found during the drilling operation and meets all the regulatory requirements for the Gulf of Mexico and other deep-water operational areas. Field application demonstrated that LIDF reduced the effect of temperature on the fluid rheological properties and minimized the risk of induced formation losses. These same rheological features reduced non-productive time associated with cement displacement and barite sagging. Supporting laboratory and field data are presented to demonstrate the superior performance of the fluid in maintaining rheological and barite suspension properties over a wide range of temperatures. The properties of the LIDF are achieved by matching the effects of emulsifier, organophilic clay, and rheological modifiers to maintain correct rheological properties at low and high temperatures.

Development and Performance Evaluation of a Deep Water Synthetic Based Drilling Fluid System

Application of Synthetic-based Drilling Fluid to Shale-gas Wells in Sichuan Basin

An Offshore Benign WBM System Can Prevent Hard, Brittle Shale Instability

Preparation and Performance Evaluation of an Environmentally Friendly Lubricant for Water-based Drilling fluid

Experimental Optimization of High-Temperature-Resistant and Low Oil—Water Ratio High-Density Oil-Based Drilling Fluid

Evaluation Indexes of Environmental Protection and a Novel System for Offshore Drilling Fluid

Research and Performance Evaluation of Polyol Based Drilling Fluid

Research and Evaluation of High-Temperature and High-Pressure Drilling Fluid Measuring System

Development of Multiple Crosslinked Polymers and Its Application in Synthetic-Based Drilling Fluids

Analysis of Development Status of High Performance Water-based Drilling Fluid

Study of Environmentally Friendly Wild Jujube Pit Powder as a Water-Based Drilling Fluid Additive

Novel water-based drilling and completion fluid technology to improve wellbore quality during drilling and protect unconventional reservoirs

A new type of high density fracturing fluid system

Development and evaluation of a novel high-density weighted fracturing fluid in ultra-deep reservoirs

Low Impact Drilling Fluid for Deepwater Drilling Frontier

Optimization of High Temperature-Resistant Modified Starch Polyamine Anti-Collapse Water-Based Drilling Fluid System for Deep Shale Reservoir

The Development and Evaluation of Novel Self-Degrading Loss-Circulation Material for Ultra-Deepwater Drilling in South China Sea

Research and Application of New Technology of Bionic Enhanced Wellbore and Strong Lubrication Water-Based Drilling Fluid

Temperature- and Salt-Resistant Micro-Crosslinked Polyampholyte Gel as Fluid-Loss Additive for Water-Based Drilling Fluids

Study on a New Environmentally Friendly Synthetic Fluid for Preparing Synthetic-Based Drilling Fluid

Experimental Investigation into an Ultra-low-Friction Water-Based Drilling Fluid for Tight Gas Well: A Case Study of Tight Gas Well in Sichuan Basin, China