Abstract:5-hydroxymethylfurfural (HMF) and furfural are promising platform molecules which can be converted to fuel intermediates and hydrocarbon fuels. Herein, one-step, direct conversion of the carbohydrates in never treated biomass to HMF and furfural in a microwave reactor was investigated. The influence of reaction temperature, time, feedstock, addition of Lewis and Brønsted acids, solvent and solvent to aqueous ratio were studied to find the optimum process conditions to maximize the yields of furfurals. The reaction conditions of 200 °C for 5 min with 33 mM HCl and 8 mM AlCl3 using a dioxane/water (4:1) miscible solvent system were found to be the most conducive for direct dehydration of the glucan and hemicelluloses present in untreated poplar wood to furfural and HMF in yields of 91 and 69%, respectively. Furfural could be easily produced in yields greater than 80%, and once formed, it was found to be stable under the various process conditions explored. In contrast, HMF yields varied with both reaction time and temperature, as it readily underwent rehydration to levulinic acid in yields approaching 25–30% at increased reaction severity. The additions of both Brønsted (HCl) and Lewis (AlCl3) acids in catalytic amounts, i.e., 33 and 8 mM, respectively, were required to maximize the yield of furfurals. Reactions were also performed on other feedstocks (corn stover, switchgrass, loblolly pine, and pure cellulose) to investigate the effect of feedstock type on furfurals yields. Results showed that HMF and furfural yields were primarily dependent on hexosan and pentosan loading regardless of the type of feedstock. In addition, biomass physical features, such as crystallinity or the presence of other biomass constituents, such as lignin, had little influence on furfurals yields.

Single-Vessel Synthesis of 5-Hydroxymethylfurfural (HMF) from Milled Corn

Efficient One-Pot Production of 5-Hydroxymethylfurfural from Glucose in an Acetone–Water Solvent

Concentrated HCl Catalyzed 5-(Chloromethyl)furfural Production from Corn Stover of Varying Particle Sizes

Highly Efficient Production of 5-Methoxymethylfurfural from Fructose in Dimethyl Sulfoxide/Amberlyst-15 Catalytic System

Highly Efficient One-Pot Conversion of Glucose to 5-Hydroxymethylfurfural over Acid–Base Bifunctional MCM-41 Mesoporous Silica under Mild Aqueous Conditions

Selective 5-hydroxymethylfurfural production from cellulose formate in DMSO-H<sub>2</sub>O media

Conversion of glucose to 5-hydroxymethyl furfural in water-acetonitrile-dimethyl sulfoxide solvent with aluminum on activated carbon and maleic acid

Mechanistic Investigation of Cellulose Formate to 5-Hydroxymethylfurfural Conversion in DMSO-H2O

Green Synthesis of Cellulose Formate and Its Efficient Conversion into 5-Hydroxymethylfurfural

Efficient Conversion of Chitin into 5-Hydroxymethylfurfural Via a Simple Formylation Step under Mild Conditions

Microwave‐Assisted Production of 5‐hydroxymethylfurfural from Glucose

5‐hydroxymethylfurfural and its Downstream Chemicals: A Review of Catalytic Routes

Direct Conversion of Biomass Carbohydrates to Platform Chemicals: 5-Hydroxymethylfurfural (HMF) and Furfural

Production of 4-Hydroxymethylfurfural from Derivatives of Biomass-Derived Glycerol for Chemicals and Polymers

5-Hydroxymethylfurfural (HMF) Production from Real Biomasses

Production and Synthetic Possibilities of 5-Chloromethylfurfural as Alternative Biobased Furan

Production and Downstream Integration of 5-(Chloromethyl)furfural from Lignocellulose

Production of 5-Hydroxymethylfurfural from Hydrolysate of pretreated lignocellulosic biomass in a biphasic system reactor

One-pot Conversion of Biomass-Derived Carbohydrates into 5-[(Formyloxy)methyl]furfural: A Novel Alternative Platform Chemical

Chemical transformations of 5-hydroxymethylfurfural to highly added value products: Present and future

Aqueous‐Natural Deep Eutectic Solvent‐Enhanced 5‐Hydroxymethylfurfural Production from Glucose, Starch, and Food Wastes