Abstract:This paper reports a new stick-slip piezoelectric linear actuator with large load density, compact size, and high resolution. It is devised using a dual-arch bridge-type driving mechanism (DBDM) and an integrated elliptical preload mechanism(IEPM). The DBDM can generate a coupling motion on the driving point, which provides clamping and releasing actions during stick-slip motion. Also, the DBDM can magnify the clamping force with large amplification ratios, thus improving driving force and load-carrying capacity. The IEPM uses compact flexure hinges to adjust preload force, reducing structural dimension. Then, theoretical analysis and simulations are conducted, and a prototype is fabricated. A modified driving voltage with smooth turning points is designed to improve motion properties further. Experiments show that load density is 0.037 g/mm $^{\mathbf{3}}$ under the driving voltage of 100 V. The actuator has an overall size of 33.6 mm $\times$ 20 mm $\times$ 8 mm and a displacement resolution of 22 nm. Note to Practitioners —Most research on linear actuators focused on motion displacement improvement, and more research needs to be done on improving load-carrying capacity. Therefore, this paper designs a force amplification linear actuator with a compact structure using the DBDM. In the experimental stage, the sudden change of the driving signal affects the output performance, and a modified sawtooth voltage is used to improve the output speed and load-carrying capacity. The experimental results show that under the modified sawtooth wave voltage, the maximum speed of the slider is 1.4 mm/s, and the speed is increased by 17% compared with the traditional wave. When a 200 g load is applied to the slider, the linear actuator operates at a stable speed of 1.2 $\mu $ m/s, 33% faster than conventional sawtooth waves. As a result, the designed actuator has superior performance at higher loads.

Design, Analysis, and Experiment on a Novel Stick-Slip Piezoelectric Actuator with a Lever Mechanism

Design and Experimental Research of a Novel Stick-Slip Type Piezoelectric Actuator

Design and Experimental Investigation of a Novel Stick-Slip Piezoelectric Actuator Based on V-shaped Driving Mechanism

Experiments and Study of a Low-Frequency, High-Speed Bi-Directional Piezoelectric Stick-Slip Actuator

A Novel Stick-Slip Piezoelectric Actuator Based on Two-Stage Flexible Hinge Structure.

Design, Analysis and Experimental Performance of a Novel Stick-Slip Type Piezoelectric Rotary Actuator Based on Variable Force Couple Driving

Design and performance evaluation of a stick-slip actuator with Z-shaped beam and two-stage amplification system

Design and Experimental Evaluation of a Novel Stepping Linear Piezoelectric Actuator

Design and Locomotion Study of Stick-Slip Piezoelectric Actuator Using Two-Stage Flexible Hinge Structure

Development and Evaluation of a New Piezoelectric Stick-Slip Actuator Using Stair Type Flexure Hinge

A New Stick-Slip Piezoelectric Actuator Using Dual-Arch Bridge-Type Compliant Mechanisms

Development of a Novel Piezoelectric Actuator Based on Stick–Slip Principle by Using Asymmetric Constraint

A Novel Trapezoid-Type Stick–Slip Piezoelectric Linear Actuator Using Right Circular Flexure Hinge Mechanism

A Novel Stick–Slip Piezoelectric Actuator Based on a Triangular Compliant Driving Mechanism

Achieving smooth motion in displacement amplification piezoelectric stick-slip actuator

A Novel Stick-Slip Type Rotary Piezoelectric Actuator

A flexure hinged piezoelectric stick–slip actuator with high velocity and linearity for long-stroke nano-positioning

Achieving smooth motion of stick–slip piezoelectric actuator by means of alternate stepping

Design and performance evaluation of a novel stick–slip piezoelectric linear actuator with a centrosymmetric-type flexure hinge mechanism

Design and performance of a compact stick-slip type piezoelectric actuator based on right triangle flexible stator

Linear Lever-Type Piezoelectric Inchworm Actuator