Test Study on the Expansion Mechanical Properties of Regenerated Anhydrite Rock

Lei Li,Liang He,Yao Wang

DOI: https://doi.org/10.1088/1755-1315/358/5/052029

2019-12-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract Dihydrate gypsum was formed after the anhydrite was immersed in water, and the volume of rock increased significantly. In order to analyze the expansion mechanical properties of Ordovician anhydrite rock, anhydrite rock samples (regenerated anhydrite rock) were obtained by high temperature drying of anhydrite rock samples, and then the rock expansibility were studied. Experiments show that: (1) Rock expansion curve of regenerated anhydrite shows three typical stages: linear rapid increase stage, concave stage and stable stage, and its maximum value of rock expansibility appears at the end of the second stage. (2) The expansion is closely related to the porosity of rock and the comprehensive performance between rock expansion and dissolution, and the average value of force in group B is 2.5964MPa and C is 1.9693MPa. The test scheme and results can provide references for the study of mechanical behavior of gypsum under dry wet cycling.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to analyze the swelling mechanical properties of recycled anhydrite rock. Specifically, the researchers explored the swelling stress characteristics of recycled anhydrite rock during the water absorption process through experimental methods, and how these characteristics are affected by rock porosity and other factors. The paper mainly focuses on the following points:

1. **Stages of rock swelling force curve**: It was observed through experiments that the swelling force curve of recycled anhydrite rock can be divided into three typical stages: the linearly rapid increase stage, the concave stage, and the stable stage. The maximum swelling force value appears at the end of the second stage.

2. **Relationship between swelling force and rock porosity**: The study found that the swelling force of the rock is closely related to its internal porosity. The smaller the porosity, the higher the density of the rock, and the greater its maximum swelling force value. At the same time, the "dissolution stress release value" is also larger, which indicates that the pores inside the rock provide deformation space for the rock's swelling and reduce the outward extrusion.

3. **Comprehensive analysis of experimental results**: The experimental results show that the measured swelling force of recycled anhydrite rock is the result of the combined action of rock swelling and dissolution. The average swelling force of group B samples is 2.5964 MPa, and the average swelling force of group C samples is 1.9693 MPa.

Through these experiments and analyses, this paper aims to provide references for studying the mechanical behavior of gypsum under dry - wet cycling conditions.