Abstract:This research suggests a robust integration of artificial neural networks (ANN) for predicting swell pressure and the unconfined compression strength of expansive soils ( P s UCS -ES). Four novel ANN-based models, namely ANN-PSO (i.e., particle swarm optimization), ANN-GWO (i.e., grey wolf optimization), ANN-SMA (i.e., slime mould algorithm) alongside ANN-MPA (i.e., marine predators' algorithm) were deployed to assess the P s UCS -ES. The models were trained using the nine most influential parameters affecting P s UCS -ES, collected from a broader range of 145 published papers. The observed results were compared with the predictions made by the ANN-based metaheuristics models. The efficacy of all these formulated models was evaluated by utilizing mean absolute error (MAE), Nash–Sutcliffe (NS) efficiency, performance index ρ , regression coefficient ( R 2 ), root mean square error (RMSE), ratio of RMSE to standard deviation of actual observations (RSR), variance account for (VAF), Willmott's index of agreement (WI), and weighted mean absolute percentage error (WMAPE). All the developed models for P s -ES had an R significantly > 0.8 for the overall dataset. However, ANN-MPA excelled in yielding high R values for training dataset ( TrD ), testing dataset ( TsD ), and validation dataset ( VdD ). This model also exhibited the lowest MAE of 5.63%, 5.68%, and 5.48% for TrD , TsD , and VdD , respectively. The results of the UCS model's performance revealed that R exceeded 0.9 in the TrD . However, R decreased for TsD and VdD . Also, the ANN-MPA model yielded higher R values (0.89, 0.93, and 0.94) and comparatively low MAE values (5.11%, 5.67, and 3.61%) in the case of PSO, GWO, and SMA, respectively. The UCS models witnessed an overfitting problem because the aforementioned R values of the metaheuristics were 0.62, 0.56, and 0.58 ( TsD ), respectively. On the contrary, no significant observation was recorded in the VdD of UCS models. All the ANN-base models were also tested using the a-20 index. For all the formulated models, maximum points were recorded to lie within ± 20% error. The results of sensitivity as well as monotonicity analyses depicted trending results that corroborate the existing literature. Therefore, it can be inferred that the recently built swarm-based ANN models, particularly ANN-MPA, can solve the complexities of tuning the hyperparameters of the ANN-predicted P s UCS -ES that can be replicated in practical scenarios of geoenvironmental engineering.

Application of a Hybrid Artificial Neural Network-Particle Swarm Optimization (ANN-PSO) Model in Behavior Prediction of Channel Shear Connectors Embedded in Normal and High-Strength Concrete

Optimizing ANN models with PSO for predicting short building seismic response

Prediction and modeling of mechanical properties in fiber reinforced self-compacting concrete using particle swarm optimization algorithm and artificial neural network

Compressive Strength Prediction of Rubber Concrete Based on Artificial Neural Network Model with Hybrid Particle Swarm Optimization Algorithm

Metaheuristic optimization of Levenberg–Marquardt-based artificial neural network using particle swarm optimization for prediction of foamed concrete compressive strength

The Feasibility of Three Prediction Techniques of the Artificial Neural Network, Adaptive Neuro-Fuzzy Inference System, and Hybrid Particle Swarm Optimization for Assessing the Safety Factor of Cohesive Slopes

Predicting the shear strength of concrete beam through ANFIS-GA–PSO hybrid modeling

Prediction of Bearing Capacity of the Square Concrete-Filled Steel Tube Columns: An Application of Metaheuristic-Based Neural Network Models

ANN-based swarm intelligence for predicting expansive soil swell pressure and compression strength

Predicting the compressive strength of normal and High-Performance Concretes using ANN and ANFIS hybridized with Grey Wolf Optimizer

Simulation of foamed concrete compressive strength prediction using adaptive neuro-fuzzy inference system optimized by nature-inspired algorithms

A PSO-ANN Intelligent Hybrid Model to Predict the Compressive Strength of Limestone Fillers Roller Compacted Concrete (RCC) to Build Dams

A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques

Prediction of ultimate conditions and stress–strain behaviour of steel-confined ultra-high-performance concrete using sequential deep feed-forward neural network modelling strategy

Mechanical Performance Prediction for Sustainable High-Strength Concrete Using Bio-Inspired Neural Network

Optimized artificial neural network model for accurate prediction of compressive strength of normal and high strength concrete

Data-driven PSO-CatBoost machine learning model to predict the compressive strength of CFRP- confined circular concrete specimens

Incorporation of artificial neural network with principal component analysis and cross-validation technique to predict high-performance concrete compressive strength

Comparative Analysis of Shear Strength Prediction Models for Reinforced Concrete Slab–Column Connections

Artificial neural network, machine learning modelling of compressive strength of recycled coarse aggregate based self-compacting concrete

Artificial Neural Network Model for Predicting Mechanical Strengths of Economical Ultra-High-Performance Concrete Containing Coarse Aggregates: Development and Parametric Analysis