Abstract:Iron is commonly present in groundwater worldwide. The presence of iron in drinking water is not harmful to human health, however it is undesirable because of the associated aesthetic and operational problems, namely: bad taste, colour, stains on laundry and plumbing fixtures, and aftergrowth in the distribution system. Iron is generally removed from groundwater by the process of aeration followed by rapid sand filtration. This study reveals that two mechanisms are involved in this process, namely: “floc filtration” and “adsorptive filtration”. Floc filtration comprises the oxidation of iron(II), which is the dominant form of iron in groundwater, to iron(III) followed by floc formation and removal of the flocs by rapid sand filtration. In adsorptive filtration, iron(II) is adsorbed onto filter media and subsequently oxidised to iron(III), forming a coating on the filter media. Under the commonly applied treatment conditions in iron removing plants the floc filtration is expected to be dominant and the adsorptive filtration complimentary. A pilot study conducted at the Gilze water treatment plant of Water Supply North West Brabant demonstrated that adsorptive filtration has several potential advantages over floc filtration, namely: longer filter runs due to slower head loss development, better filtrate quality, shorter ripening time and less backwash water use. In existing groundwater treatment plants, the high iron(II) adsorption capacity of the iron oxide coated filter media makes it potentially possible to switch the governing mode of operation from floc filtration to adsorptive filtration. To achieve this two options can be considered, they are: (i) iron(II) adsorption under anoxic conditions followed by oxidation with oxygen-rich water and, (ii) adsorption of iron(II) in the presence of oxygen and simultaneous oxidation. The first option might be attractive specifically when two filtration steps are available.

Color Removal from Groundwater by Coagulation and Oxidation Processes

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

Arsenic Removal in Synthetic Ground Water Using Iron Electrolysis

Removal of manganese(II) and iron(II) from synthetic groundwater using potassium permanganate

Removal of Stable Mn/Fe from Taihu Lake Water by Preoxidation with Permanganate Composite

Removal of iron and manganese from drinking water supply

Enhanced Degradation of Orange G by Permanganate with the Employment of Iron Anode

Comprehending the Practical Implementation of Permanganate and Ferrate for Water Remediation in Complex Water Matrices.

Removal of manganese, ferrous and antibiotics from groundwater simultaneously using peroxymonosulfate-assisted in-situ oxidation/coagulation integrated with ceramic membrane process

Effect of permanganate preoxidation in enhancing the coagulation of surface waters - Laboratory case studies

Effect of Hydrous Manganese Dioxide on the Treatment of Low-Turbidity Source Water: Plant-Scale Experience

Application of Fenton's Reaction for Removal of Organic Matter from Groundwater

Study on the Mechanism of Iron Removal by Air Oxidation and the Technology of Biological Removal of Fe 2+ , Mn 2+ (I)

Coupled iron corrosion and chromate reduction: mechanisms for subsurface remediation.

Study on Removal of Manganese from Micro-polluted Water by Potassium Permanganate Preoxidation

Enhanced coagulation of polluted surface water with high organic contents

Adsorptive Iron Removal from Groundwater

Treatment of Dye Wastewater with Permanganate Oxidation and in Situ Formed Manganese Dioxides Adsorption: Cation Blue As Model Pollutant

Evaluation of chemical oxygen demand and color removal from leachate using coagulation/flocculation combined with advanced oxidation process

Enhanced Coagulation of Surface Waters with High Organic Content by Permangante Preoxidation