Abstract:In this study, a neural network approach is presented for the prediction and control of surface roughness in a computer numerically controlled (CNC) lathe. Experiments have been performed on the CNC lathe to obtain the data used for the training and testing of a neural network. The parameters used in the experiment were reduced to three cutting parameters which consisted of depth of cutting, cutting speed, and feed rate. Each of the other parameters such as tool nose radius, tool overhang, approach angle, workpiece length, workpiece diameter and workpiece material was taken as constant. A feed forward multi-layered neural network was developed and the network model was trained using the scaled conjugate gradient algorithm (SCGA), which is a type of back-propagation. The adaptive learning rate was used. Therefore, the learning rate was not selected before training and it was adjusted during training to minimize training time. The number of iterations was 8000 and no smoothing factor was used. Ra, Rz and Rmax were modeled and were evaluated individually. One hidden layer was used for all models while the numbers of neurons in the hidden layer of the Ra model were five and the numbers of neurons in the hidden layers of the Rz and Rmax models were ten. The results of the neural network approach were compared with actual values. In addition, inasmuch as the control of surface roughness is proposed, a control algorithm was developed in the present investigation. The desired surface roughness was entered into the control system as a reference value and the controller determined the cutting parameters for these surface roughness values. A new surface roughness value was determined by sending the cutting parameters to the observer (ANN block). The obtained surface roughness was fed back to the comparison unit and was compared with the reference value and the difference surface roughness was then sent to the controller. The iteration was continued until the difference was reduced to a certain value of surface roughness which could be permitted for machining accuracy. When the surface roughness reached the permitted value, these cutting parameters were sent to the CNC turning system as input values. In conclusion, both the surface roughness values corresponding to the cutting parameters and suitable cutting parameters for a certain surface roughness can be determined prior to a machining operation using the ANN and control algorithm.

Neural Network Based Nonlinear Autoregressive Models for CNC Machine Process

Adaptive modelling of the milling process and application of a neural network for tool wear monitoring

Synthetic Error Modeling for NC Machine Tools Based on Intelligent Technology

Using Neural Networks for Tool Wear Prediction in Computer Numerical Control End Milling

Tool condition monitoring in CNC end milling using wavelet neural network based on machine vision

Support Vector Machine and Neural Network United System for NC Machine Tool Thermal Error Modeling

Prediction and control of surface roughness in CNC lathe using artificial neural network

Support Vector Regression Based Nonlinear Model Reference Adaptive Control

Milling wear prediction using an artificial neural network model

Tool Wear Monitoring in Turning: A Neural Network Application

Application of Partial Least Squares Neural Network in Thermal Error Modeling for Cnc Machine Tool

Convolutional Neural Networks for Raw Signal Classification in CNC Turning Process Monitoring

Optimal Linear Combination of Neural Networks to Model Thermally Induced Error of Machine Tools

TOOL CONDITION MONITORING IN MACHINING USING ROBUST RESIDUAL NEURAL NETWORKS

The Tool Wear and Breakage Monitoring in Turning Using Neural Network

Prediction of wheel and rail wear under different contact conditions using artificial neural networks

Recurrent Neural Network Based Modelling of Industrial Grinding Time Series Data

Dynamics modeling for the ultrasonic machining tool using a data-driven approach and a D-RBFNN

An adaptive recurrent-neural-network motion controller for X-Y table in CNC machine

Diagnosis of Milling Cutter Condition Based on AR Model