Abstract:Most model parametrization techniques for reduced order physics-based Lithium-ion battery models like the single particle model rely on minimizing the error in the measured and predicted cell terminal voltage. The battery terminal voltage is the difference between the voltages of the positive and negative electrode solid phase potentials. If the individual contribution of each electrode overpotential to the terminal voltage, is not measured, there could be multiple combinations of parameters that provide similar RMSE for voltage prediction, yielding non-unique solutions and local minima. Misattributing the parameters for kinetics and diffusion in each electrode could result in increased plating or over-conservative designs at higher operating currents. Adding a reference electrode to the battery allows us to measure the individual electrode potentials experimentally. Using this extra measurement, we can parametrize the kinetic and diffusion reactions in positive and negative electrodes with better confidence [1], and validate the electrode-specific state of health parameterization, specifically the increased resistances due to SEI growth and shift in the stoichiometric window as the cell ages [2,3]. In our experiments, we used a pouch cell manufactured in the U of M Battery Lab with Targray NMC 622 Single Crystal cathode powder, Superior SLC 1520-T anode powder, and a custom fabricated Lithium Iron Phosphate (LFP) reference electrode deposited on a porous electrode layer. Further details of the reference electrode are given in [4]. The model was parametrized using discharge data at different C-rates and a modified Hybrid Pulse Power Characterization test. Finally, the RMSE for both the modeled negative and positive electrode potentials are calculated for the validation data set which uses the US06 Drive cycle. References: [1] Zhengyu Chu et al., Journal of Energy Storage, Volume 27 (2020). [2] Suhak Lee et al 2020., J. Electrochem. Soc., 167, 090531 (2020). [3] Hannah M. Dahn et al., 2012 J. Electrochem. Soc. 159, A1405 (2012). [4] Taylor R. Garrick et al., J. Electrochem. Soc. 168, 010530 (2021).

Characterization of limiting factors of an all-solid-state Li-ion battery using an embedded indium reference electrode

Electrochemical Impedance Spectroscopy Study on Using Li10GeP2S12 Electrolyte for All-Solid-State Lithium Batteries

Micromechanism in All-Solid-State Alloy-Metal Batteries: Regulating Homogeneous Lithium Precipitation and Flexible Solid Electrolyte Interphase Evolution

Miniaturization of Reference Electrodes for Solid-State Lithium-Ion Batteries

The Timescale Identification and Quantification of Complicated Kinetic Processes in Lithium-Ion Batteries Based on Micro-Reference Electrodes

In-situ interfacial passivation and self-adaptability synergistically stabilizing all-solid-state lithium metal batteries

Understanding Solid Electrolyte Interphase (SEI) Species at the Electrode-Electrolyte Interface in Liquid Lithium Metal Batteries Via in-Situ Fourier Transform Infrared (FTIR) Spectroscopy

Direct in-situ measurement of electrical properties of solid electrolyte interphase on lithium metal anode

Issue of Lithium-indium Anode in High Energy and Power All-Solid-State Lithium Batteries

Using Reference Electrodes to Validate Parameterization of Individual Electrode Soh in the Single Particle Model with Electrolyte

Simple Framework for Simultaneous Analysis of Both Electrodes in Stoichiometric Lithium-Sulfur Batteries

Unravelling the Chemistry and Microstructure Evolution of a Cathodic Interface in Sulfide-Based All-Solid-State Li-Ion Batteries

Domain-Limited Laminar Lithium Deposition Behavior Mediated by the Design of Hybrid Anode for Sulfide-Based All-Solid-State Batteries

Electrolyte-dependent formation of solid electrolyte interphase and ion intercalation revealed by in situ surface characterizations

Editors' Choice—Alleviating the Kinetic Limitations of the Li-In Alloy Anode in All-Solid-State Batteries

Electrochemical behavior of elemental alloy anodes in solid-state batteries

Ionic Conduction through Reaction Products at the Electrolyte-Electrode Interface in All-Solid-State Li+ Batteries

Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries

Unraveling the Intra and Intercycle Interfacial Evolution of Li6PS5Cl‐Based All‐Solid‐State Lithium Batteries

A Multi-Kernel-shell Indium Selenide@carbon Nanosphere Enabling High-Performance Lithium-Ion Batteries

Growth of lithium-indium dendrites in all-solid-state lithium-based batteries with sulfide electrolytes