Abstract:Mixed conducting perovskite-structured oxides are desirable catalysts toward the oxygen reduction reaction (ORR) process. Pure cubic perovskite-structured SrCoO3–δ is a promising class of mixed conductors with high ORR activity. However, it suffers from structural instability and thermal incompatibility at elevated temperatures, thereby impeding its practical application in intermediate-temperature solid oxide fuel cells (IT-SOFCs). In this work, A-site electron doping in SrCoO3–δ was conducted to chemically compensate for the loss of lattice oxygen, thus improving the structural stability of SrCoO3–δ . Among the as-prepared Y-doped Sr1−x Y x CoO3−δ (x = 0.05–0.20) samples, 10 mol% Y-doping of Sr0·9Y0·1CoO3–δ (SYC10) experimentally exhibits desirable electrical conductivity and lowest area specific resistance (ASR) while maintaining structural stability at elevated temperatures. The results are confirmed by first-principles calculations that involve density of states and oxygen vacancy formation energy. In addition, Gd0.1Ce0·9O1.95 incorporation further improves the thermal compatibility and cell performance, where the measured thermal expansion coefficients between 30 °C and 1000 °C decrease from 23.3 × 10−6 K−1 for SYC10 to 19.0 × 10−6 K−1 for SYC10–40GDC, and the corresponding ASRs with La0·9Sr0.1Ga0.8Mg0·2O3–δ electrolyte decrease from 0.080 Ω cm2 to 0.044 Ω cm2 at 700 °C. Results suggest that SYC10–40GDC is a desirable cathode material for IT-SOFCs.

A highly active and stable cathode for oxygen reduction in intermediate-temperature solid oxide fuel cells

High-performance and CO2‐resistant cathode toward electrocatalytic oxygen reduction for solid oxide fuel cells: Doped ceria and SrCo0.7Nb0.1Ni0.2O3-δ composite

Evaluation of A-site deficient Sr1−xSc0.175Nb0.025Co0.8O3−δ (x=0, 0.02, 0.05 and 0.1) perovskite cathodes for intermediate-temperature solid oxide fuel cells

A novel Nb and Cu co-doped SrCoO<sub>3-</sub> cathode for intermediate temperature solid oxide fuel cells

A New Highly Active and CO2-stable Perovskite-Type Cathode Material for Solid Oxide Fuel Cells Developed from A- and B-site Cation Synergy

Stability, compatibility and performance improvement of SrCo0.8Fe0.1Nb0.1O3−δ perovskite as a cathode for intermediate-temperature solid oxide fuel cells

Structural, electrical and electrochemical characterizations of SrNb0.1Co0.9O3−δ as a cathode of solid oxide fuel cells operating below 600°C

Characterization of SrCo 0.7 Fe 0.2 Nb 0.1 O 3−δ cathode materials for intermediate-temperature solid oxide fuel cells

High-Performance Srnb0.1co0.9-Xfexo3-Delta Perovskite Cathodes For Low-Temperature Solid Oxide Fuel Cells

Cerium and Niobium Doped SrCoO3−δ As a Potential Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Nickel-substituted Ba0.5Sr0.5Co0.8Fe0.2O3-: a Highly Active Perovskite Oxygen Electrode for Reduced-Temperature Solid Oxide Fuel Cells

High-performance SrNb0.1Co0.9−xFexO3−δperovskite cathodes for low-temperature solid oxide fuel cells

Cobalt-free SrNbxFe1−xO3−δ (x = 0.05, 0.1 and 0.2) Perovskite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Performance and reaction process of Ba1−xCo0.7Fe0.2Nb0.1O3-δ cathode for intermediate-temperature solid oxide fuel cell

An A-Site-Deficient Perovskite Offers High Activity And Stability For Low-Temperature Solid-Oxide Fuel Cells

Enhanced oxygen reduction kinetics of SrCoO 3-δ by Ta/Cu or Nb/Cu co-doping as high-performance cathodes for SOFC

A medium entropy cathode with enhanced chromium resistance for solid oxide fuel cells

Computational Design and Experimental Validation of the Optimal Bimetal-Doped SrCoO 3−δ Perovskite as Solid Oxide Fuel Cell Cathode

Novel nano-network cathodes for solid oxide fuel cells

Synergistic electron doping and ion conductive phase incorporating of SrCoO3- as desirable cathode materials for intermediate-temperature solid oxide fuel cells

Textured Sr₂Sc 0.1 Nb 0.1 Co 1.5 Fe 0.3 O 6-2δ Thin Film Cathodes for IT-SOFCs.