Abstract:This study systematically investigated the effects of a single B-site dopant (Fe, x = 0–1.0) on the structure and oxygen reduction reaction of the Ba0.9K0.1CoO3−δ (BKC) material used as a cathode for low-temperature solid oxide fuel cells (LT-SOFCs). The structural, electronic, and electrocatalytic properties of the cathode materials prepared by a sol–gel method were comparatively characterized. The results indicated that cubic perovskite structure BKF x C (Fe, x = 0.5, 0.6) materials had been formed by calcination at 900 °C for 5 h. Moreover, in order to examine the electrochemical properties of BKF x C, the BKF x C cathode was constructed on the Sm0.075Nd0.075Ce0.85O2−δ (SNDC) electrolyte (BKFC/SNDC/BKFC: denoted as symmetric cells); the lowest polarization resistance (R P) was obtained for the BKF0.5C symmetric cell (1.6 Ω·cm2 at 550 °C), which demonstrated much higher electrocatalytic activity than that of a similar cell with the BKF0.6C cathode (2.87 Ω·cm2 at 550 °C). A single cell with the BKF0.5C cathode achieved a top power density of 752 mW·cm–2 at 550 °C, which is 0.35 times higher than that of the single cell with the BKF0.6C cathode (power density: 556 mW·cm–2). The corresponding total interface R P of the fuel cell was 0.303 Ω·cm2, lower than that of the doping amount of 0.6 (550 °C, 0.402 Ω·cm2). Meanwhile, O2 temperature-programmed desorption (O2-TPD) and thermogravimetric (TG) analysis were used to characterize the valence of Fe and Co changing from +4 to +3 as well as the stable structure of the material from room temperature to 600/1000 °C. As a result, a highly efficient method for the innovative BKFC cathode was developed in this work.

Performance and reaction process of Ba1−xCo0.7Fe0.2Nb0.1O3-δ cathode for intermediate-temperature solid oxide fuel cell

Evaluation of A-site deficient Sr1−xSc0.175Nb0.025Co0.8O3−δ (x=0, 0.02, 0.05 and 0.1) perovskite cathodes for intermediate-temperature solid oxide fuel cells

Electrode redox properties of Ba 1−x La x FeO 3−δ as cobalt free cathode materials for intermediate-temperature SOFCs

High Active Cathode for Doped Ceria Electrolyte in SOFC

A-site Deficient Ba1−xCo0.7Fe0.2Ni0.1O3−δ Cathode for Intermediate Temperature SOFC

Characterization of SrCo 0.7 Fe 0.2 Nb 0.1 O 3−δ cathode materials for intermediate-temperature solid oxide fuel cells

Ba1−xCo0.9−yFeyNb0.1O3−δ (x = 0–0.15, Y = 0–0.9) As Cathode Materials for Solid Oxide Fuel Cells

Ca and Fe co-doped NdBaCo2O5+ double perovskites as high-performance cathodes for solid oxide fuel cells

BaCo0.7Fe0.2Nb0.1O3−δ As Cathode Material for Intermediate Temperature Solid Oxide Fuel Cells

Structure and Properties of Novel Cobalt-Free Oxides Nd x Sr 1– x Fe 0.8 Cu 0.2 O 3−δ (0.3 ≤ x ≤ 0.7) as Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Evaluation of A-site Cation-Deficient (ba0.5sr0.5)1−xco0.8fe0.2o3−δ (x > 0) Perovskite As a Solid-Oxide Fuel Cell Cathode

Structure And Properties Of Novel Cobalt-Free Oxides Ndxsr1-Xfe0.8cu0.2o3-Delta (0.3 <= X <= 0.7) As Cathodes Of Intermediate Temperature Solid Oxide Fuel Cells

Preparation and properties of BaxSr1-xCoyFe1-yO3-δ cathode material for intermediate temperature solid oxide fuel cells

Cobalt-free SrNbxFe1−xO3−δ (x = 0.05, 0.1 and 0.2) Perovskite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Fe-Doped Ba 0.9 K 0.1 Fe x Co 1– x O 3−δ Perovskite Cathode Material for Low-Temperature Solid Oxide Fuel Cells

Structural, electrical and electrochemical characterizations of SrNb0.1Co0.9O3−δ as a cathode of solid oxide fuel cells operating below 600°C

High-Performance Srnb0.1co0.9-Xfexo3-Delta Perovskite Cathodes For Low-Temperature Solid Oxide Fuel Cells

High Performance BaFe1−xBixO3−δ As Cobalt-Free Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Insight into the structure and functional application of the Sr0.95Ce0.05CoO3-δ cathode for solid oxide fuel cells

Manipulating the Activity and Thermal Compatibility of NdBaCoFeO5+δ Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells Via Fluorine Doping

Novel layered perovskite oxide PrBaCuCoO5+δ as a potential cathode for intermediate-temperature solid oxide fuel cells