Abstract:Given the scarcity of water and energy resources and their potential to escalate into future crises, water and energy have emerged as the paramount challenges of the present century. To address these challenges, simultaneously, a novel membrane distillation (MD) technique named photothermal MD (PMD) has come to the forefront in recent years. The PMD is rapidly advancing, particularly in the field of desalination, towards increasing the use of sustainable solar energy. In this work, the surface of poly(vinylidene fluoride) (PVDF) electrospun membrane was turned into a photothermal surface by binding graphene oxide (GO) nanosheets using a binder solution made of polydimethylsiloxane (PDMS) with different concentrations (0.1, 0.5, 1, 2, 3 wt%). Subsequently, the environmentally-friendly low-pressure plasma polymerization method was employed to polymerize perfluorodecyl acrylate (PFDA) monomers on the surface of coated electrospun membrane to achieve an omniphobic surface. In this regard, the contact angles of water, oil, and ethanol/water (70/30 v/v) solution on the surface of the coated membranes were measured to be 144°, 124.4°, and 120.8°, respectively. Compared to the uncoated electrospun membrane, the one coated with GO-containing binder solution with optimum PDMS concentration of 0.1 wt%, showed a significant increase in flux by 41 % at 1 sun irradiation during photothermal vacuum MD (PVMD). In the PVMD process, the conventional method of feed heating was substituted with membrane surface heating utilizing solar energy. Additionally, vacuum was employed to facilitate the passage of water vapor through the membrane pores. This increment was further highlighted by salt rejection remained constant at 99.9 %. It was also found that PDMS concentration in the GO-containing binder solution adversely affects the membrane efficiency, exhibiting a decreasing trend from 54.1 % to 17.5 % when PDMS concentration increases from 0.1 to 3 wt%. Additionally, the long-term performance assessment of the prepared membrane coated with the binder solution with optimum PDMS concentration of 0.1 wt% demonstrated its acceptable resistance against wetting by the NaCl aqueous solution (35 g/L) containing 0.3 mM sodium dodecyl sulfate (SDS).

Preparation and characterization of PVDF/PVP-GO membranes to be used in MBR system

Novel GO-blended PVDF ultrafiltration membranes

High-permeability graphene oxide and poly(vinyl pyrrolidone) blended poly(vinylidene fluoride) membranes: Roles of additives and their cumulative effects

Anti-biofouling property and anti-leaching investigation of modifier for PVDF ultrafiltration membrane by incorporating antibacterial graphene oxide derivatives

PVDF ultrafiltration membranes containing copper oxide-charcoal based graphene oxide nanohybrids with enhanced performance and antifouling properties

Surface modification of GO / PVDF composite membrane by MXene /protonated g‐C 3N4 nanosheets hybrids with improved dye separation and antifouling properties

Preparation of a novel polyvinyl chloride ultrafiltration membrane modified with graphene oxide nanoparticle derived from plastic waste for wastewater purification

Enhanced MPBR with Polyvinylpyrrolidone-Graphene Oxide/pvdf Hollow Fiber Membrane for Efficient Ammonia Nitrogen Wastewater Treatment and High-Density Chlorella Cultivation

Preparation of PVDF membrane blended with graphene oxide-zinc sulfide (GO-ZnS) nanocomposite for improving the anti-fouling property

Graphene oxide-chitosan coated PVDF adsorptive microfiltration membrane: Enhancing dye removal and antifouling properties

Improving the Antifouling Property of Polysulfone Ultrafiltration Membrane by Incorporation of Isocyanate-Treated Graphene Oxide.

Functionalised graphene oxide-based nanofiltration membranes with enhanced molecular separation performance

A Membrane with Strong Resistance to Organic and Biological Fouling Using Graphene Oxide and D-Tyrosine as Modifiers

Graphene oxide-polyethylene glycol incorporated PVDF nanocomposite ultrafiltration membrane with enhanced hydrophilicity, permeability, and antifouling performance

Azido-group Functionalized Graphene Oxide/polysulfone Mixed Matrix Ultrafiltration Membrane with Enhanced Interfacial Compatibility for Efficient Water and Wastewater Treatment

Contribution of graphene oxide (GO)-containing polydimethylsiloxane (PDMS) binder to the surface modification of electrospun PVDF membrane towards development of photothermal vacuum membrane distillation (PVMD)

PVDF membranes embedded with PVP functionalized nanodiamond for pharmaceutical wastewater treatment

Separation Mechanisms and Anti-Fouling Properties of a Microporous Polyvinylidene Fluoride–Polyacrylic Acid–Graphene Oxide (PVDF-PAA-GO) Composite Membrane with Salt and Protein Solutions

Preparation of fouling resistant and highly perm-selective novel PSf/GO-vanillin nanofiltration membrane for efficient water purification

Enhanced Antifouling in Flat-Sheet Polyphenylsulfone Membranes Incorporating Graphene Oxide-Tungsten Oxide for Ultrafiltration Applications

Prepartion and separation performance of GO modified PVDF ultrafiltration membrane