Abstract:Al2O3/water nanofluid conjugate heat transfer inside a microchannel is studied numerically. The fluid flow is laminar and a constant heat flux is applied to the axisymmetric microchannel’s outer wall, and the two ends of the microchannel’s wall are considered adiabatic. The problem is inherently three-dimensional, however, in order to reduce the computational cost of the solution, it is rational to consider only a half portion of the axisymmetric microchannel and the domain is revolved through its axis. Hence. the problem is reduced to a two-dimensional domain, leading to less computational grid. At the centerline (r = 0), as the flow is axisymmetric, there is no radial gradient (∂u/∂r = 0, v = 0, ∂T/∂r = 0). The effects of four Reynolds numbers of 500, 1000, 1500, and 2000; particle volume fractions of 0% (pure water), 2%, 4%, and 6%; and nanoparticles diameters in the range of 10 nm, 30 nm, 50 nm, and 70 nm on forced convective heat transfer as well as performance evaluation criterion are studied. The parameter of performance evaluation criterion provides valuable information related to heat transfer augmentation together with pressure losses and pumping power needed in a system. One goal of the study is to address the expense of increased pressure loss for the increment of the heat transfer coefficient. Furthermore, it is shown that, despite the macro-scale problem, in microchannels, the viscous dissipation effect cannot be ignored and is like an energy source in the fluid, affecting temperature distribution as well as the heat transfer coefficient. In fact, it is explained that, in the micro-scale, an increase in inlet velocity leads to more viscous dissipation rates and, as the friction between the wall and fluid is considerable, the temperature of the wall grows more intensely compared with the bulk temperature of the fluid. Consequently, in microchannels, the thermal behavior of the fluid would be totally different from that of the macro-scale.

Study of heat and mass transfer control inside channel partially filled with a porous medium using nanofluids

Investigation of the thermo-convective characteristics of a flow passing through a partially heated channel filled with a porous medium saturated with a hybrid nanofluid

Analysis of Error and Stability of Nanofluid over Horizontal Channel with Heat/Mass Transfer and Nonlinear Thermal Conductivity

A numerical study using hybrid nanofluid to control heat and mass transfer in a porous media: Application to drying of building bricks

Heat transfer enhancement by natural convection in a partially porous annular space between two coaxial cylinders saturated by Cu–water nanofluid

Flow and heat transfer of nanofluids in a cylindrical permeable wavy channel embedded in porous medium using Buongiorno's model

Impacts of two-phase nanofluid approach toward forced convection heat transfer within a 3D wavy horizontal channel

Numerical investigation on forced convection in rectangular cross section micro-channels with nanofluids

Numerical study of the optimization of the thermal and flow characteristics of a collector design of microchannels with two inlets and outlets, containing a nanofluid and a water-based fluid

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Magnetohydrodynamic mixed convection of nanofluid within an annular space filled partially with a porous layer between a lid-driven wall and a discrete heater

Investigation of phase change and heat transfer in water/copper oxide nanofluid enclosed in a cylindrical tank with porous medium: A molecular dynamics approach

Computational Investigation of Thermal Process in Radiated Nanofluid Modulation Influenced by Nanoparticles (Al2O3) and Molecular (H2O) Diameters

Mixed convection heat transfer in a partial porous layered split lid-driven wavy wall cavity with Cu–H2O nanofluid

Impact of two-phase hybrid nanofluid approach on mixed convection inside wavy lid-driven cavity having localized solid block

Numerical study of natural convection in an inclined cavity filled with Al2O3/Cu-H2O nanofluids

Investigation of Nanofluid Heat Transfer in a Microchannel Under Magnetic Field Via Lattice Boltzmann Method: Effects of Surface Hydrophobicity, Viscous Dissipation, and Joule Heating

Numerical investigation of nanofluid laminar forced convection heat transfer between two horizontal concentric cylinders in the presence of porous medium

Numerical study of thermo-solutal convection of a Cu/water micropolar nanofluid in a cubic cavity saturated with porous media

Numerical Investigation of Forced Convective Heat Transfer and Performance Evaluation Criterion of Al2O3/Water Nanofluid Flow inside an Axisymmetric Microchannel

Numerical simulation on thermohydraulic performance of different types of nanofluids in a corrugated-triangular channel