The importance of anode protection towards lithium oxygen batteries

Xuanxuan Bi,Khalil Amine,Jun Lu

DOI: https://doi.org/10.1039/c9ta12414d

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:An overview is presented of the recent advances on Li anode protection in aprotic Li–O 2 batteries.

materials science, multidisciplinary,chemistry, physical,energy & fuels

What problem does this paper attempt to address?

Enhanced Cycling Performance of Li–O2 Battery by Using a Li3PO4-Protected Lithium Anode in DMSO-Based Electrolyte

Huanhuan Guo,Guangmei Hou,Jianguang Guo,Xiaohua Ren,Xiaoxin Ma,Linna Dai,Shirui Guo,Jun Lou,Jinkui Feng,Lin Zhang,Pengchao Si,Lijie Ci

DOI: https://doi.org/10.1021/acsaem.8b01061

IF: 6.4

2018-01-01

ACS Applied Energy Materials

Abstract:Lithium oxygen batteries (LOBs) have attracted increasing interest because of their superior theoretical specific energy. However, the stability of lithium metal anode is one of the obstacles limiting their practical applications. Here, we introduce an artificial Li3PO4 solid electrolyte interphase (SEI) film to protect the lithium anode in LOB with LiI/LiNO3/DMSO (dimethyl sulfoxide) electrolyte. The Li3PO4-protected Li anode exhibits excellent electrochemical stability during the Li stripping/plating process and leads to a relatively uniform and featureless surface in LOB after cycling. Our research demonstrates that superior electrochemical performance can be achieved in the Li O-2 battery with the synergistic combination of the DMSO-based electrolyte, the LiI redox mediator, and the Li(3)PO(4)protected Li anode. The LOB with a Li3PO4-protected Li anode exhibits a prolonged cycling life span of 152 cycles with a fixed capacity of 1000 mA h at 2 A The results in this work provide knowledge for the development of a robust strategy for protecting the Li anode in the applications of Li-O-2 batteries.
Advances in Lithium-Containing Anodes of Aprotic Li-O2Batteries: Challenges and Strategies for Improvements

Hucheng Song,Han Deng,Chao Li,Ning‐Ning Feng,Ping He,Haoshen Zhou

DOI: https://doi.org/10.1002/smtd.201700135

IF: 12.4

2017-01-01

Small Methods

Abstract:Lithium metal for rechargeable aprotic Li–O2 batteries is considered one of the most fascinating anode materials that can deliver high theoretical specific capacity, low density, and low negative electrochemical potential. Although lithium-metal anodes have been studied extensively for decades, the cycling performance of rechargeable aprotic Li–O2 batteries based on lithium-metal anodes is rather poor because of the unresolved security issues related to lithium dendrites and contaminant (O2, H2O) crossover from cathode to anode. Here, the critical issues and challenges facing lithium-containing anodes associated with the security, stability, and efficiency are analyzed. Moreover, the latest research progress and strategies used to improve the performance of aprotic Li–O2 batteries based on lithium-containing anode are reviewed. Perspectives toward the development of highly stable lithium-containing anodes are also presented.
Safe Lithium‐Metal Anodes for Li−O2 Batteries: from Fundamental Chemistry to Advanced Characterization and Effective Protection

Yan-Shuai Hong,Chen-Zi Zhao,Ye Xiao,Rui Xu,Jing-Jing Xu,Jia-Qi Huang,Qiang Zhang,Xiqian Yu,Hong Li

DOI: https://doi.org/10.1002/batt.201900031

2019-01-01

Batteries & Supercaps

Abstract:Rechargeable Li-O-2 batteries play an increasing important role as energy storage devices, which have both, a high capacity anode and a cathode using an inexhaustible resource. As a key component in Li-O-2 batteries, the Li-metal anode suffers from major drawbacks related to Li dendrite formation and SEI layer growth, which are also major issues for Li-metal rechargeable batteries. This review presents an overview on the scientific challenges, fundamental mechanisms and modification strategies of Li-metal anodes for Li-O-2 batteries. Firstly, basic principles and challenges on Li-metal anodes are briefly retrospected. We further summarize and categorize the prevailing characterization techniques based on Li dendrite morphology characterization and SEI composition analysis. The up-to-date development of in-situ and operando characterization is also included. Following the obtained insights, effective protection/modification strategies towards practical application for Li-O-2 batteries are presented. Furthermore, we highlight the significance of advanced characterization techniques in interrogating the buried keys for solving practical hindrances for Li-O-2 batteries. The comprehensive characterization and analysis of Li anodes, cathodes, and electrolytes by various methods together with the development of novel techniques are expected to be indispensable to gain a thorough understanding of the battery operation and for offering guidelines for their practical development.
Recent developments of aprotic lithium-oxygen batteries: functional materials determine the electrochemical performance

Xin Guo,Bing Sun,Dawei Su,Xiaoxue Liu,Hao Liu,Yong Wang,Guoxiu Wang

DOI: https://doi.org/10.1016/j.scib.2017.01.037

2017-03-30

Abstract:Lithium oxygen battery has the highest theoretical capacity among the rechargeable batteries and it can reform energy storage technology if it comes to commercialization. However, many critical challenges, mainly embody as low charge/discharge round-trip efficiency and poor cycling stability, impede the development of Li-O2 batteries. The electrolyte decomposition, lithium metal anode corrosion and sluggish oxygen reaction kinetics at cathode are all responsible for poor electrochemical performances. Particularly, the catalytic cathode of Li-O2 batteries, playing a crucial role to reduce the oxygen during discharging and to decompose discharge products during charging, is regarded as a breakthrough point that has been comprehensive investigated. In this review, the progress and issues of electrolyte, anode and cathode, especially the catalysts used at cathode, are systematically summarized and discussed. Then the perspectives toward the developments of a long life Li-O2 battery are also presented at last.
Electrode Protection in High-Efficiency Li–O 2 Batteries

Gang Huang,Jin Wang,Xinbo Zhang

DOI: https://doi.org/10.1021/acscentsci.0c01069

IF: 18.2

2020-11-24

ACS Central Science

Abstract:The aprotic Li–O2 battery possessing the highest theoretical energy density, approaching that of gasoline, has been regarded as one of the most promising successors to Li-ion batteries. Before this kind of battery can become a viable technology, a series of critical issues need to be conquered, like low round-trip efficiency and short cycling lifetime, which are closely related to the continuous parasitic processes happening at the cathode and anode during cycling. With an aim to promote the practical application of Li–O2 batteries, great effort has been devoted to identify the reasons for oxygen and lithium electrodes degradation and provide guidelines to overcome them. Thus, the stability of cathode and anode has been improved a lot in the past decade, which in turn significantly boosts the electrochemical performances of Li–O2 batteries. Here, an overlook on the electrode protection in high-efficiency Li–O2 batteries is presented by providing first the challenges of electrodes facing and then the effectiveness of the existing approaches that have been proposed to alleviate these. Moreover, new battery systems and perspectives of the viable near-future strategies for rational configuration and balance of the electrodes are also pointed out. This Outlook deepens our understanding of the electrodes in Li–O2 batteries and offers opportunities for the realization of high performance and long-term durability of Li–O2 batteries.This Outlook summarizes the existing strategies toward protection of the electrodes for enabling high-efficiency Li−O2 batteries and proposes new battery systems and viable near-future strategies to further boost the performance of Li−O2 batteries.This article has not yet been cited by other publications.

chemistry, multidisciplinary
Metal Anodes and Protected Interfaces: General Discussion

Xiangwen Gao,Clare P. Grey,Laurence J. Hardwick,Gabriela Horwitz,Lee R. Johnson,Shoichi Matsuda,Svetlana Menkin,Alex R. Neale,Nagore Ortiz-Vitoriano,Will Richardson,Jeff Sakamoto,Kohei Uosaki,Eric D. Wachsman,Yiying Wu

DOI: https://doi.org/10.1039/d3fd90061d

2024-01-01

Faraday Discussions

Abstract:Shoichi Matsuda opened a discussion of the paper by Jeff Sakamoto: For considering the practical application of lithium–oxygen batteries, the anode should contain lithium ions, as the oxygen cathode does not contain any lithium ions under the initial conditions. So, can the concept of an in sit
Protecting lithium metal anodes in lithium–sulfur batteries: A review

Chen-Xi Bi,Li-Peng Hou,Zheng Li,Meng Zhao,Xue-Qiang Zhang,Bo-Quan Li,Qiang Zhang,Jia-Qi Huang

DOI: https://doi.org/10.34133/energymatadv.0010

2023-01-12

Energy Material Advances

Abstract:Lithium–sulfur (Li–S) batteries are considered as one of the most promising next-generation energy storage devices because of their ultrahigh theoretical energy density beyond lithium-ion batteries. The cycling stability of Li metal anode largely determines the prospect of practical applications of Li–S batteries. This review systematically summarizes the current advances of Li anode protection in Li–S batteries regarding both fundamental understanding and regulation methodology. First, the main challenges of Li metal anode instability are introduced with emphasis on the influence from lithium polysulfides. Then, a timeline with 4 stages is presented to afford an overview of the developing history of this field. Following that, 3 Li anode protection strategies are discussed in detail in aspects of guiding uniform Li plating/stripping, reducing polysulfide concentration in anolyte, and reducing polysulfide reaction activity with Li metal. Finally, 3 viewpoints are proposed to inspire future research and development of advanced Li metal anode for practical Li–S batteries.
Li2O2 Formation Electrochemistry and Its Influence on Oxygen Reduction/Evolution Reaction Kinetics in Aprotic Li–O2 Batteries

Huan Liu,Yihao Liu,Chen Wang,Xiaohui Peng,Weiwei Fang,Yuyang Hou,Jun Wang,Jilei Ye,Yuping Wu

DOI: https://doi.org/10.1002/smtd.202101280

IF: 12.4

2021-01-01

Small Methods

Abstract:Aprotic Li-O2 batteries are regarded as the most promising technology to resolve the energy crisis in the near future because of its high theoretical specific energy. The key electrochemistry of a nonaqueous Li-O2 battery highly relies on the formation of Li2 O2 during discharge and its reversible decomposition during charge. The properties of Li2 O2 and its formation mechanisms are of high significance in influencing the battery performance. This review article demonstrates the latest progress in understanding the Li2 O2 electrochemistry and the recent advances in regulating the Li2 O2 growth pathway. The first part of this review elaborates the Li2 O2 formation mechanism and its relationship with the oxygen reduction reaction/oxygen evolution reaction electrochemistry. The following part discusses how the cycling parameters, e.g., current density and discharge depth, influence the Li2 O2 morphology. A comprehensive summary of recent strategies in tailoring Li2 O2 formation including rational design of cathode structure, certain catalyst, and surface engineering is demonstrated. The influence resulted from the electrolyte, e.g., salt, solvent, and some additives on Li2 O2 growth pathway, is finally discussed. Further prospects of the ways in making advanced Li-O2 batteries by control of favorable Li2 O2 formation are highlighted, which are valuable for practical construction of aprotic lithium-oxygen batteries.
A Review of Rechargeable Aprotic Lithium–oxygen Batteries Based on Theoretical and Computational Investigations

Shengqi Ding,Xuebin Yu,Zi-Feng Ma,Xianxia Yuan

DOI: https://doi.org/10.1039/d1ta00646k

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:This review covers the recent advances in theoretical and computational investigations on aprotic Li–O2 batteries.
Recent Advances in Understanding of the Mechanism and Control of Li2O2formation in Aprotic Li–O2batteries

Zhiyang Lyu,Yin Zhou,Wenrui Dai,Xinhang Cui,Min Lai,Li Wang,Fengwei Huo,Wei Huang,Zheng Hu,Wei Chen

DOI: https://doi.org/10.1039/c7cs00255f

IF: 46.2

2017-01-01

Chemical Society Reviews

Abstract:Aprotic Li-O2 batteries represent promising alternative devices for electrical energy storage owing to their extremely high energy densities. Upon discharge, insulating solid Li2O2 forms on cathode surfaces, which is usually governed by two growth models, namely the solution model and the surface model. These Li2O2 growth models can largely determine the battery performances such as the discharge capacity, round-trip efficiency and cycling stability. Understanding the Li2O2 formation mechanism and controlling its growth are essential to fully realize the technological potential of Li-O2 batteries. In this review, we overview the recent advances in understanding the electrochemical and chemical processes that occur during the Li2O2 formation. In the beginning, the oxygen reduction mechanisms, the identification of O2-/LiO2 intermediates, and their influence on the Li2O2 morphology have been discussed. The effects of the discharge current density and potential on the Li2O2 growth model have been subsequently reviewed. Special focus is then given to the prominent strategies, including the electrolyte-mediated strategy and the cathode-catalyst-tailoring strategy, for controlling the Li2O2 growth pathways. Finally, we conclude by discussing the profound implications of controlling Li2O2 formation for further development in Li-O2 batteries.
Oxygen-Based Anion Redox for Lithium Batteries

Matthew Li,Xuanxuan Bi,Khalil Amine,Jun Lu

DOI: https://doi.org/10.1021/acs.accounts.0c00104

2020-08-18

Abstract:ConspectusThe importance of current Li-ion batteries (LIBs) in modern society cannot be overstated. While the energy demands of devices increase, the corresponding enhancements in energy density of battery technologies are highly sought after. Currently, many different battery concepts, such as Li-S and metal-air among many others, have been investigated. However, their practical implementation has mostly been restricted to the prototyping stage. In fact, most of these technologies require rework of existing Li-ion battery manufacturing facilities and will naturally incur resistance to change from industry. For this reason, one specifically attractive technology, anionic redox in transition metal oxides, has gained much attention in the recent years. Its ability to be directly used in already established processes and higher energy density with similar electrolyte formulation make it a key materials research direction for next generation Li-ion batteries. In regular LIBs, the redox active centers are the transition metal cation. In anion redox, both the anion (typically O) and the transition metal cation are utilized as redox centers with enormous implications for increasing energy density. This new material can be highly competitive for replacing the current LIB technologies. However, much is still unknown about its cycling mechanism. Upon activating the O redox couples, most cationic and anionic redox active materials will either evolve O2 or undergo irreversible structural degradation with associated severe decreases in electrochemical performance. By understanding the transition from full anion redox to partial cationic and anionic redox, we hope readers can gain a deeper understanding of the topic.This Account will focus mainly on the work that was conducted by our group at Argonne National Laboratory. The phenomenon of cationic and anionic redox in a lithium-ion battery cathode will first be discussed. Our work in resonant inelastic X-ray scattering to investigate the spectroscopic features of O after delithiation has found potential "fingerprint" signals that could likely be used to identify and confirm reversible O redox if corroborated with other techniques. To follow, we will examine our work on Li-O2 batteries. While our group and the research community have had many significant contributions and improvements to the field of Li-O2 (such as decreasing overpotential and achieving cyclability in air environment), its practical application is still far from realization. Perhaps our most important contribution to this area is the discovery that Ir deposited on reduced graphene oxide can be used to halt the reduction of O2 at the LiO2 oxidation state. This not only significantly decreases the charge overpotential but also presents the important concept of oxidation-state controlled discharge. Subsequently, we will focus on our oxidation state-controlled redox-based charging of oxygen in a pure oxygen redox Li-ion battery. Future implications of this technology will be emphasized.
Recent Advances in Research on Anodes for Safe and Efficient Lithium–metal Batteries

Jifang Zhang,Yipeng Su,Yuegang Zhang

DOI: https://doi.org/10.1039/d0nr03833d

IF: 6.7

2020-01-01

Nanoscale

Abstract:The revival of lithium metal anodes (LMAs) makes it a potent influence on the battery research community in the recent years after the popularity of Li-ion batteries with graphite anodes. The main reason is due to the over ten-fold increase in the capacity of LMAs when compared with that obtained when using graphite, as well as the low redox potential of Li/Li+. However, the full potential of LMAs is heavily inhibited by several factors, such as dendrite growth, pulverization, side reactions, and volume changes. These adversities lower the cell's Coulombic efficiency dramatically if operated without massively excessive Li usage. In this review, we first introduce some of the most significant progresses made in the understandings of the charging/discharging processes at the anode. The importance of combining advanced characterization techniques with classical methods is highlighted. In particular, we aim to explore the hidden links between those studies for obtaining deeper insights. Two main categories of solutions to address common problems, namely, lithium-electrolyte interfacial engineering and three-dimensional hosting of Li, are subsequently illustrated, where each subsection takes a different methodological perspective to demonstrate the relevant state-of-the-art studies. Some interesting approaches to stop dendrites and a brief note on the practical aspects of lithium-metal batteries are provided, too. This review concludes with our essential discoveries from the current literature and valuable suggestions for future LMA research.
Research Progress In Anode Protection Of Lithium Metal Batteries By Electrolyte Chemistry

Yang Jun,Lin Yuan-Hua,Liao Li,Chen Yang-Yang,Feng Xuan-Jie,Li Pei,Ji Hong-Jiang,Wang Ming-Shan,Chen Jun-Chen,Li Xing

DOI: https://doi.org/10.11868/j.issn.1001-4381.2020.000265

2021-01-01

Abstract:Lithium metal batteries have been considered as one of the most promising high-energy-density energy storage devices, however, the low Coulombic efficiency and uncontrolled dendrite growth seriously hinder their commercialization. In lithium metal batteries, the electrolytes would directly participate in the formation of solid electrolyte interface (SEI) , which play important roles in affecting the lithium metal anode Coulombic efficiency and inhibiting the growth of lithium dendrites. In the traditional LiPF6 based ester electrolyte, lithium metal anode exhibits low Coulomb efficiency and serious lithium dendrites. In recent years, significant improvement has been achieved for the protection of lithium anode through manipulating the electrolyte additive, solvents, lithium salt and lithium salt concentration, etc. For examples, ether solvent presenting better compatibility with lithium metal was selected to reduce the side reactivity of electrolyte with lithium metal;varieties of additives were adopted to suppress the formation of lithium dendrites; high concentration electrolytes were employed to form stable SEI. In this paper, the growth principles of lithium dendrites, the research status of electrolytes chemistries for protection of lithium metal anode by means of solvents, lithium salts, additives and high concentration electrolytes strategies were reviewed and the advantages and limitations of various approaches were summarized. New insights on the development of electrolytes chemistries were also put forward to stimulate new strategies to face the subsequent challenges of lithium-metal batteries.
Li 2 O 2 Formation Electrochemistry and Its Influence on Oxygen Reduction/Evolution Reaction Kinetics in Aprotic Li–O 2 Batteries

Lili Liu,Yihao Liu,Chen Wang,Xiaohui Peng,Weiwei Fang,Yuyang Hou,Jun Wang,Jilei Ye,Yuping Wu

DOI: https://doi.org/10.1002/smtd.202101280

IF: 12.4

2021-11-21

Small Methods

Abstract:Aprotic Li-O2 batteries are regarded as the most promising technology to resolve the energy crisis in the near future because of its high theoretical specific energy. The key electrochemistry of a nonaqueous Li-O2 battery highly relies on the formation of Li2 O2 during discharge and its reversible decomposition during charge. The properties of Li2 O2 and its formation mechanisms are of high significance in influencing the battery performance. This review article demonstrates the latest progress in understanding the Li2 O2 electrochemistry and the recent advances in regulating the Li2 O2 growth pathway. The first part of this review elaborates the Li2 O2 formation mechanism and its relationship with the oxygen reduction reaction/oxygen evolution reaction electrochemistry. The following part discusses how the cycling parameters, e.g., current density and discharge depth, influence the Li2 O2 morphology. A comprehensive summary of recent strategies in tailoring Li2 O2 formation including rational design of cathode structure, certain catalyst, and surface engineering is demonstrated. The influence resulted from the electrolyte, e.g., salt, solvent, and some additives on Li2 O2 growth pathway, is finally discussed. Further prospects of the ways in making advanced Li-O2 batteries by control of favorable Li2 O2 formation are highlighted, which are valuable for practical construction of aprotic lithium-oxygen batteries.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Prevention of dendrite growth and volume expansion to give high-performance aprotic bimetallic Li-Na alloy–O2 batteries

Jin-ling Ma,Fan-lu Meng,Yue Yu,Da-peng Liu,Jun-min Yan,Yu Zhang,Xin-bo Zhang,Qing Jiang

DOI: https://doi.org/10.1038/s41557-018-0166-9

IF: 24.274

2018-11-12

Nature Chemistry

Abstract:Rechargeable aprotic alkali metal (Li or Na)–O2 batteries are the subject of great interest because of their high theoretical specific energy. However, the growth of dendrites and cracks at the Li or Na anode, as well as their corrosive oxidation lead to poor cycling stability and safety issues. Understanding the mechanism and improving Li/Na-ion plating and stripping electrochemistry are therefore essential to realizing their technological potential. Here, we report how the use of a Li-Na alloy anode and an electrolyte additive realizes an aprotic bimetal Li-Na alloy–O2 battery with improved cycling stability. Electrochemical investigations show that stripping and plating of Li and Na and the robust and flexible passivation film formed in situ (by 1,3-dioxolane additive reacting with the Li-Na alloy) suppress dendrite and buffer alloy anode volume expansion and thus prevent cracking, avoiding electrolyte consumption and ensuring high electron transport efficiency and continued electrochemical reactions.

chemistry, multidisciplinary
Research Progress of Lithium Plating on Graphite Anode in Lithium‐Ion Batteries

Daozhong Hu,Lai Chen,Jun Tian,Yuefeng Su,Ning Li,Gang Chen,Yulu Hu,Yueshan Dou,Shi Chen,Feng Wu

DOI: https://doi.org/10.1002/cjoc.202000512

IF: 5.56

2020-12-23

Chinese Journal of Chemistry

Abstract:Lithium plating on graphite anode is triggered by harsh conditions of fast charge and low temperature, which significantly accelerates SOH (state of health) degradation and may cause safety issues of lithium ion batteries (LIBs). This paper has reviewed recent research progress of lithium plating on graphite anode. Firstly, we summarize the forming mechanisms of Li plating with corresponding influence factors, the detecting methods and hazard of Li plating. Then, approaches to suppress Li plating are discussed, including anode surface modification, electrolyte composition optimization and development of optimal charge strategies. Finally, we conclude and propose the remaining challenges and prospects in terms of mechanism research, detecting approaches, and suppressing methods of Li plating. This review highlights the development of Li plating research and plays a guiding rule of further study on Li plating in LIBs.This article is protected by copyright. All rights reserved.

chemistry, multidisciplinary
Overcoming the Obstacles of Lithium-Metal Anodes for High-Energy Batteries

Jiale Qu,Junjie Liu,Guorui Leng,Yunqing Wang,Shanshan Wang,Shuang Shen,Haoyu Yin,Zhenghao Hou,Baorong Duan

DOI: https://doi.org/10.1016/j.elecom.2023.107537

IF: 5.443

2023-07-05

Electrochemistry Communications

Abstract:The impressive theoretical specific capacity and negative potential of lithium have led to its status as a prime candidate for anodes in secondary lithium batteries. Lithium metal electrodes are an area of growing importance in this field. Despite the promise that lithium batteries hold, several practical issues impede their widespread use, such as short cycle life, low coulombic efficiency, and safety concerns including combustion and explosion. The growth of lithium dendrites during battery discharge is widely recognized as the cause of these problems. In this manuscript, we present a comprehensive review of current understanding and existing issues associated with lithium metal electrodes.

electrochemistry
Fluorinated Organic Compounds As Promising Materials to Protect Lithium Metal Anode: A Review

Tuoya Naren,Ruheng Jiang,Qianfeng Gu,Gui-chao Kuang,Libao Chen,Qichun Zhang

DOI: https://doi.org/10.1016/j.mtener.2024.101512

IF: 9.257

2024-01-26

Materials Today Energy

Abstract:The lowest electrode potential and remarkable theoretical specific capacity of lithium (Li) metal make it a promising choice for next-generation high energy density batteries. However, the practical application of Lithium metal anodes (LMAs) faces several significant challenges due to their unwanted reactions with the electrolyte to continuously form Li dendrites. These issues significantly hinder both electrochemical performance and safety. To overcome these challenges, fluorinated organic materials (FOMs), with their unique chemical and physical properties, offer an exciting avenue for enhancing cycle stability and energy density of batteries. This is attributed to their higher electrolytic window and chemical stability. This review would provide a comprehensive overview of the crucial role played by FOMs in safeguarding LMAs, such as F-containing electrolyte engineering, separator modification, and artificial SEI. Additionally, it intends to explore the challenges and latest advances in this domain, with the ultimate objective of offering insights and forward-looking perspectives for future research initiatives in related areas.

materials science, multidisciplinary,chemistry, physical,energy & fuels
In Situ Designing a Gradient Li+ Capture and Quasi-Spontaneous Diffusion Anode Protection Layer toward Long-Life Li-O2 Batteries

Yue Yu,Gang Huang,Jia-Zhi Wang,Kai Li,Jin-Ling Ma,Xin-Bo Zhang

DOI: https://doi.org/10.1002/adma.202004157

Abstract:Lithium metal is the only anode material that can enable the Li-O2 battery to realize its high theoretical energy density (≈3500 Wh kg-1 ). However, the inherent uncontrolled dendrite growth and serious corrosion limitations of lithium metal anodes make it experience fast degradation and impede the practical application of Li-O2 batteries. Herein, a multifunctional complementary LiF/F-doped carbon gradient protection layer on a lithium metal anode by one-step in situ reaction of molten Li with poly(tetrafluoroethylene) (PTFE) is developed. The abundant strong polar C-F bonds in the upper carbon can not only act as Li+ capture site to pre-uniform Li+ flux but also regulate the electron configuration of LiF to make Li+ quasi-spontaneously diffuse from carbon to LiF surface, avoiding the strong Li+ -adhesion-induced Li aggregation. For LiF, it can behave as fast Li+ conductor and homogenize the nucleation sites on lithium, as well as ensure firm connection with lithium. As a result, this well-designed protection layer endows the Li metal anode with dendrite-free plating/stripping and anticorrosion behavior both in ether-based and carbonate ester-based electrolytes. Even applied protected Li anodes in Li-O2 batteries, its superiority can still be maintained, making the cell achieve stable cycling performance (180 cycles).
Advancements in Lithium–Oxygen Batteries: A Comprehensive Review of Cathode and Anode Materials

Jing Guo,Xue Meng,Qing Wang,Yahui Zhang,Shengxue Yan,Shaohua Luo

DOI: https://doi.org/10.3390/batteries10080260

2024-07-23

Batteries

Abstract:As modern society continues to advance, the depletion of non-renewable energy sources (such as natural gas and petroleum) exacerbates environmental and energy issues. The development of green, environmentally friendly energy storage and conversion systems is imperative. The energy density of commercial lithium-ion batteries is approaching its theoretical limit, and even so, it struggles to meet the rapidly growing market demand. Lithium–oxygen batteries have garnered significant attention from researchers due to their exceptionally high theoretical energy density. However, challenges such as poor electrolyte stability, short cycle life, low discharge capacity, and high overpotential arise from the sluggish kinetics of the oxygen reduction reaction (ORR) during discharge and the oxygen evolution reaction (OER) during charging. This article elucidates the fundamental principles of lithium–oxygen batteries, analyzes the primary issues currently faced, and summarizes recent research advancements in air cathodes and anodes. Additionally, it proposes future directions and efforts for the development of lithium–air batteries.

The importance of anode protection towards lithium oxygen batteries

Enhanced Cycling Performance of Li–O2 Battery by Using a Li3PO4-Protected Lithium Anode in DMSO-Based Electrolyte

Advances in Lithium-Containing Anodes of Aprotic Li-O2Batteries: Challenges and Strategies for Improvements

Safe Lithium‐Metal Anodes for Li−O2 Batteries: from Fundamental Chemistry to Advanced Characterization and Effective Protection

Recent developments of aprotic lithium-oxygen batteries: functional materials determine the electrochemical performance

Electrode Protection in High-Efficiency Li–O 2 Batteries

Metal Anodes and Protected Interfaces: General Discussion

Protecting lithium metal anodes in lithium–sulfur batteries: A review

Li2O2 Formation Electrochemistry and Its Influence on Oxygen Reduction/Evolution Reaction Kinetics in Aprotic Li–O2 Batteries

A Review of Rechargeable Aprotic Lithium–oxygen Batteries Based on Theoretical and Computational Investigations

Recent Advances in Understanding of the Mechanism and Control of Li2O2formation in Aprotic Li–O2batteries

Oxygen-Based Anion Redox for Lithium Batteries

Recent Advances in Research on Anodes for Safe and Efficient Lithium–metal Batteries

Research Progress In Anode Protection Of Lithium Metal Batteries By Electrolyte Chemistry

Li 2 O 2 Formation Electrochemistry and Its Influence on Oxygen Reduction/Evolution Reaction Kinetics in Aprotic Li–O 2 Batteries

Prevention of dendrite growth and volume expansion to give high-performance aprotic bimetallic Li-Na alloy–O2 batteries

Research Progress of Lithium Plating on Graphite Anode in Lithium‐Ion Batteries

Overcoming the Obstacles of Lithium-Metal Anodes for High-Energy Batteries

Fluorinated Organic Compounds As Promising Materials to Protect Lithium Metal Anode: A Review

In Situ Designing a Gradient Li+ Capture and Quasi-Spontaneous Diffusion Anode Protection Layer toward Long-Life Li-O2 Batteries

Advancements in Lithium–Oxygen Batteries: A Comprehensive Review of Cathode and Anode Materials