Abstract:This study describes the synthesis and characterization of a magnetic cellulose gold nanocomposite (MCNC@Au) for magnetic solid phase (m-SPE) extraction of total sulfur content in liquid fuel samples followed by analysis using inductively coupled plasma-optical emission spectroscopy (ICP-OES). The nanocomposite was prepared using an in situ co-precipitation method and characterization results from FTIR, P-XRD, TEM and SEM-EDX techniques confirmed the formation of the targeted nanocomposite. To achieve good extraction efficiency, the 2-level half-fractional factorial design and central composite design were used to investigate the most influential parameters of the proposed m-SPE method. The multivariate optimization results showed that efficient extraction was obtained when 27.5 mg sorbent mass, 35 minutes sorption time, 200 μL eluent volume and 8 min elution time were used. The optimal parameters resulted in excellent accuracy (98.8%), precision (1.7%), LOD (0.039 mg L-1), LOQ (0.129 mg L-1), MDL (0.014 μg g-1) and MQL (0.047 μg g-1). The optimized and validated m-SPE method was applied in real fuel oil samples, revealing a total sulfur content range of 13.20 ± 0.05-15.70 ± 0.02 μg g-1 for crude oil, 7.32 ± 0.01-9.12 ± 0.03 for μg g-1, 8.41 ± 0.02-9.15 ± 0.06 μg g-1 for gasoline and 9.10 ± 0.02 and 9.70 ± 0.04 μg g-1 for kerosene samples, sugesting high concentration levels of sulfur in crude oils. However, the obtained sulfur content levels are within the accepted standards in fuel oils, except for those of crude oil and kerosene samples. Therefore, the proposed m-SPE method followed by ICP-OES analysis has proven to be an alternative procedure for rapid and selective quantification of total sulfur in fuel samples.

Electrochemical determination of trace sulfur containing compounds in model fuel based on a silver/polyaniline-modified electrode

Detection Of Trace Nitroaromatic Isomers Using Indium Tin Oxide Electrodes Modified Using Beta-Cyclodextrin And Silver Nanoparticles

Selective and precise solid phase extraction based on a magnetic cellulose gold nanocomposite followed by ICP-OES analysis for monitoring of total sulfur content in liquid fuels

Study on the Electrochemical Oxidation Desulfurization Behavior of Model Diesel on Anodic Alumina Oxide and Ceria Nanotubes

Mesoporous Adsorbents for Desulfurization of Model Diesel Fuel: Optimization, Kinetic, and Thermodynamic Studies

Quantitative analysis of organosulphur compounds in crude oil samples using magnetic solid phase extraction based on Au-Fe3O4 adsorbent and gas chromatography with time-of-flight mass spectrometry

Ferrocenedicarboxylic Acid Modified Multiwall Carbon Nanotubes Paste Electrode For Voltammetric Determination Of Sulfite

Electrocatalytic Determination of Sulfite at the Surface of A New Ferrocene Derivative-Modified Carbon Paste Electrode

Analyses of scanning electrochemical microscopy and electrochemical impedance spectroscopy in direct methanol fuel cells: permeability resistance and proton conductivity of polyaniline modified membrane

Synthesis And Application Of Fept/Cnts Nanocomposite As A Sensor And Novel Amide Ligand As A Mediator For Simultaneous Determination Of Glutathione, Nicotinamide Adenine Dinucleotide And Tryptophan

Physical Adsorption of N,N'-diphenyl-p-phenylenediamine Onto Carbon Particles: Application to the Detection of Sulfide.

Enhanced detection of trace sulfur levels in gasoline by bismuth electrode using square wave voltammetry

Flow Injection Amperometric Detection of Sulfide Using a Prussian Blue Modified Glassy Carbon Electrode

Catalysis-Based Fluorometric Method for Semiquantifying Trace Palladium in Sulfur-Containing Compounds and Ibuprofen

Electrocatalytic Determination of Sulfite Using a Modified Carbon Nanotubes Paste Electrode: Application for Determination of Sulfite in Real Samples

Electrochemical Determination of Benomyl Using MWCNTs Interspersed Graphdiyne As Enhanced Electrocatalyst.

Amperometric determination of sulfide ion by glassy carbon electrode modified with multiwall carbon nanotubes and copper (II) phenanthroline complex

Preparation and Characterization of Attapulgite-Silver Nanocomposites, and Their Application to the Electrochemical Determination of Nitrobenzene

Determination of Trace Amounts of Sulfamethizole Using a Multi-Walled Carbon Nanotube Modified Electrode: Application of Experimental Design in Voltammetric Studies

Determination of Thiocompounds by Liquid Chromatography with Amperometric Detection at a Nafion/indium Hexacyanoferrate Film Modified Electrode

Simple and rapid electrochemical determination of endosulfan in vegetables by polyaniline/Fe-ZnO nanocomposite-modified glassy carbon electrode