Abstract:Large steel silos are typical kinds of thin-walled structure which are widely used for storing huge quantities of granular solids in industry and agriculture. In the present analyses, the buckling design of large steel silos subject to Eurocode-specified solid pressure is demonstrated. The finite element model is established using the commercial general purpose computer package ANSYS. Six types of buckling analyses are carried out for the geometrically perfect and imperfect models with and without consideration of material plasticity. The load cases of concentric discharge, discharge patch load, large eccentricity discharge, and large eccentricity filling are considered. The buckling behavior of six example steel silos with capacities of 30 000–60 000 m 3 is investigated. The silos’ slenderness ranges from 4.77 to 0.35, comprising very slender, slender, intermediate slender, squat, and retaining silos. The index called the ratio of capacity to steel consumption (RCS) is initially defined in the paper, which provides an effective measure for the economical design of steel silos. It is validated that the RCS index increases rapidly with the decrease of silo slenderness, and the storage efficiency of steel silo improved greatly as the slenderness changes from slender silo to retaining silo. The effects of patch load reveal that the buckling modes in the case of discharge patch load are very different from those of silos under concentric solid pressure, and the effect is unfavorable for buckling resistance of all levels of slenderness of the example silos, but contributes a small decrease to the RCS index (less than 10%). The buckling deformations from both the linear and nonlinear buckling analyses in large eccentric discharge are strongly asymmetrical arising from the circumferential and meridional non-uniform distribution of the solid pressures. The buckling is mainly governed by the non-uniform distribution of the solid pressure other than other influential factors such as the weld imperfection, geometrical and material nonlinearity, compared with the load case of concentric discharge. The RCS index of example silos under large eccentric discharge is reduced substantially, and is approximately half that of silos under concentric discharge. The linear and nonlinear buckling deformations in large eccentric filling are also asymmetrical, deviating from the center to the side where the most friction locates to the highest wall contact. The RCS index of example silos under large eccentric filling is also reduced substantially, and is approximately 70% that of silos under concentric discharge. This reveals that the large eccentricity both in discharging and filling could result in a strong decrease of storage efficiency of steel silos.

Filling of a grain silo. Part 1: Investigation of fine material distribution in a small scale centre-filled silo

Multi-Scale Study of Particle Flow in Silos

Three Dimensional DEM/CFD Analysis of Segregation During Silo Filling with Binary Mixtures of Different Particle Sizes

Multi-level DEM study on silo discharge behaviors of non-spherical particles

Seismic behavior of steel silos considering granular material-structure interaction: research advances and natural vibration property analysis

Buckling design of large steel silos with various slendernesses

Three-dimensional Finite Element Simulation of Static Granular Material Pressure for Steel Silos

Buckling design of large eccentrically filled steel silos

Packing, alignment and flow of shape-anisotropic grains in a 3D silo experiment

Flow and clogging behavior of a mixture of particles in a silo

Modeling silo clogging with nonlocal granular rheology

DEM modeling of the dilute-to-dense transition of granular flow in silos

Research on seismic response and dynamic lateral pressure of the silo model under dynamic interaction between granular materials and the silo wall

Average outpouring velocity and flow rate of grains discharged from a tilted quasi-2D silo

Global self‐similarity of dense granular flow in silo: The role of silo width

Silo discharge of mixtures of soft and rigid grains

DEM/CFD Modelling of the Deposition of Dilute Granular Systems in a Vertical Container

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Model for the Prediction of Grain Density and Pressure Distribution in Hopper-Bottom Silos

DEM simulation of the pressure distribution and flow pattern in a model grain silo with an annular segment attached to the wall

Flow in an hourglass: particle friction and stiffness matter