Effect of reduction rate and annealing temperature on texture evolution and magnetic properties of used non‐oriented silicon steel

S.X. Song

DOI: https://doi.org/10.1002/mawe.201900056

2020-01-01

Materialwissenschaft und Werkstofftechnik

Abstract:<p>This paper discusses the method of improving the magnetic properties of used silicon steel by cold rolling and annealing process with used non‐oriented silicon steel as the object. The texture evolution and magnetic domain structure are also investigated. Experimental results show that the magnetic domain can be transformed vastly compared with the used silicon steel when the specimens are prepared through the same cold rolling and annealing conditions. The length of the magnetic wall and the density of magnetic domain per unit area are boosted, and the magnetic domain refinement is exceedingly apparent. Under the same annealing condition (at 950 °C for 5 min), the γ‐fiber is gradually decreased to 6.6 % and the {110} recrystallization texture is gradually enhanced with increased reduction from 28.3 % to 40 %. The intensity of the Goss texture reaches a maximum of 22.2. For the cold rolling reduction of 34.3 %, the γ‐fiber gradually decrease to 13.8 % and the {110} recrystallization texture is gradually enhanced with increase in the annealing temperature from 800 °C to 950 °C. Moreover, the intensity of Goss texture reaches 14. The sample prepared through 40 % reduction and annealing at 950 °C for 5 min exhibited the most desirable magnetic properties. The magnetic induction B₅₀ value of the specimen is increased by 0.052 T, and the core loss P_1.5/50 is reduced by 0.478 W/kg compared with the initial specimen.</p>

materials science, multidisciplinary