Abstract:Cathode materials play a crucial role in dye-sensitized solar cells (DSSCs). Herein we present the applications of graphene based composites, conductive polymers and metal selenides in DSSCs as the cathode. Monolayer of PDDA/graphene/PDDA/H2PtCl6 is fabricated on conductive glass using electrostatic layer-by-layer self-assembly technique, which is then converted to graphene/Pt monolayer for use as counter electrode in DSSC. As compared to the sputtered Pt counter electrode, the self-assembled monolayer reduces the Pt amount by about 1000-fold but exhibits comparable photovoltaic performance. Close-packed graphene suffers from a low surface area, which limits its electrocatalytic activity as the counter electrode in DSSCs. To solve this problem, we have synthesized a porous graphene/SiO2 nanocomposite converted from graphene oxide mixed with SiO2 nanoparticles through facile hydrazine hydrate reduction. Graphene and graphene/SiO2 films prepared by drop-casting the suspensions onto the conductive glass substrates at room temperature without heat treatment have been applied directly as cathodes in DSSCs. As compared to the nonporous graphene film, the porous graphene/SiO2 composite film demonstrates much better electrocatalytic performance for the reduction of triiodide in DSSCs due to the remarkably enhanced surface area. As a consequence, the incorporation of SiO2 nanoparticles in the graphene film improves fill factor and power conversion efficiency by 65% and 69%, respectively. Oriented polyaniline nanowires array has been successfully grown in situ on conductive glass substrates without templates and applied as the cathode of DSSCs mediated with a Co(bpy) 3+/2+ 3 (bpy = 2,2′-bipyridine) redox couple. As compared to the polyaniline film with a random network, the oriented polyaniline nanowires array exhibits much better electrocatalytic performance, which is even outperforming the typical Pt electrode in both electrocatalytic performance and electrochemical stability when exposed to the acetonitrile solution of Co(bpy) 3+/2+ 3 redox couple. We have also proposed a facile one-step low temperature hydrothermal approach for in-situ growth of metal selenides (Co Se and Ni 1 0.85 0.85Se) on conductive glass substrates. The as-prepared metal selenides on conductive substrates can be used directly as transparent cathodes for DSSCs without any post-treatments. It is found that graphene-like Co0.85Se exhibits higher electrocatalytic activity than Pt for the reduction of triiodide. As a consequence, the DSSC with Co0.85Se generates higher short-circuit photocurrent and power conversion efficiency (9.40%) than that with Pt. These findings provide new routes to fabrication of cheap and efficient counter electrodes for DSSCs.

Performance of Graphene–CdS Hybrid Nanocomposite Thin Film for Applications in Cu(In,Ga)Se2 Solar Cell and H2 Production

Highly Efficient 2D/3D Structured CuCo2S4/CdIn2S4 Composites with a P–n Heterojunction for Boosting Photocatalytic Hydrogen Evolution

Synthesis and Characterization of Hydrazine Solution Processed Cu12Sb4S13 Film

Graphene Quantum Dots Assisted Photovoltage and Efficiency Enhancement in Cdse Quantum Dot Sensitized Solar Cells

Chemical synthesis of Cu(In) metal inks to prepare CuInS2 thin films and solar cells

Colloidal synthesis of zincblende Cu3InSnS5 nanocrystals and their application in the thin-film solar cell

Graphene-Cds Nanocomposites: Facile One-Step Synthesis and Enhanced Photoelectrochemical Cytosensing

Intense sulphurization process can lead to superior heterojunction properties in Cu(In,Ga)(S,Se)$_2$ thin-film solar cells

Growth of NiS/graphene Nanocomposites for Enhanced Performance of Dye Sensitized Solar Cells

Synthesis of Flower-Like Graphene Doped Cobalt Oxide via Hydrothermal Method and Its Performance as Counter Electrode in Dye Sensitized Solar Cells Applications

Carbon Impurity Minimization of Solution-Processed, Thin-Film Photovoltaics via Ligand Engineering of CuInS 2 Nanoparticles

Preparation and comparison performance of CuO Nanopartecles and CuO/TiO2 / Nanocomposite and application in solar cell

Numerical simulation on an efficient n-CdS/p-ZnSnN2/p+-Cu2SnS3/p++- CuGaSe2 thin film solar cell

Easy Preparation and Photoelectrochemical Properties of CdS Nanoparticle/Graphene Nanosheet Nanocomposites Using Supercritical Carbon Dioxide.

Thin-Film Solar Cells Based on Selenized CuSbS2 Absorber

Ternary 3D architectures of CdS QDs/graphene/ZnIn2S4 heterostructures for efficient photocatalytic H2 production

Non‐Hydrazine Solutions in Processing CuIn(S,Se)2 Photovoltaic Devices from Hydrazinium Precursors

Promising GeSe Nanosheet-Based Thin-Film Photocathode for Efficient and Stable Overall Solar Water Splitting

Non-Hydrazine Solution Processed Culn(Se,S)(2) Photovoltaic Device

Cu(In, Ga)(S, Se)2 electrodeposition and characterizations using improved electrolytes

Efficient Electrocatalysts for Dye-Sensitized Solar Cells