Abstract:This study involves the in‐situ polymerization technique to incorporate fluorinated graphene quantum dots (FGQD), fluorinated carbon black (FCB), fluorinated carbon nanotubes (FCNT), and fluorinated graphene (FG) into PI matrix. A series of fluorinated nanofiller/polyimide composite films were prepared. The effects of these fluorinated nanofiller on the low dielectric properties and other comprehensive characteristics of PI materials were systematically investigated. The resulting composite films demonstrate outstanding mechanical properties, significant hydrophobicity, and favorable dielectric performance, thus presenting potential applications in future advanced packaging technologies. There is an increasing demand for polyimide (PI) with excellent mechanical properties, good heat resistance, and low dielectric constant in integrated circuits and advanced packaging. Based on this, we report a strategy of tailoring the PI via fluorinated nanofillers modification to improve its mechanical properties, heat resistance, hydrophobicity, and reduce its dielectric constant. Specifically, different fluorinated nanofiller, including fluorinated graphene (FG), fluorinated carbon nanotubes (FCNT), fluorinated carbon black (FCB), and fluorinated graphene quantum dots (FGQD) were introduced into PI matrix to prepared composite films by a simple method of in‐situ polymerization, and the effect of different nanofillers on the properties of polyimide was systematically investigated. The results showed that the introduction of fluorinated nanofillers significantly improved the comprehensive performance of the composite films, especially the FGQD. FGQD/PI composite film with 0.5 wt% FGQD exhibits superior tensile strength (145.8 MPa), Young's modulus (2.83 GPa) and elongation at break (45.4%) the best comprehensive performance which are 10.0%, 19.4%, and 32.0% of those of pure PI, respectively. Most importantly, the FGQD/PI composite film shows decreased dielectric constant (from 3.38 to 2.93) at 1 MHz improved hydrophobicity and excellent heat resistance. The FGQD/PI composite film exhibits excellent comprehensive performance, thereby showing the potential in the future development of advanced packaging and microelectronics industry.

Electrospun polyimide nonwovens with enhanced mechanical and thermal properties by addition of trace plasticizer

High Thermal Resistance Polyimide Separators Prepared Via Soluble Precusor and Non-Solvent Induced Phase Separation Process for Lithium Ion Batteries

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

Electrospun polyimide nanofiber-based nonwoven separators for lithium-ion batteries

Electrospun polyimide nanofibers and their applications

Polyhedral oligosilsesquioxane-modified boron nitride enhances the mechanical properties of polyimide nanocomposites

Electrospun polyimide-based fiber membranes as polymer electrolytes for lithium-ion batteries

Synthesis and properties of modified thermoplastic polyimide films with good dielectric properties at high frequency and enhanced thermal stability via incorporation of rigid ester and biphenyl structural units

Enhanced the mechanical strength of polyimide (PI) nanofiber separator via PAALi binder for lithium ion battery

Effect of the heat treatment temperature on mechanical and electrochemical properties of polyimide separator for lithium ion batteries

In situ aluminide armored polyimide nanofiber separators with ultrahigh strength and high wettability for advanced lithium-ion batteries

Preparation of PEI-modified PI separators for advanced lithium ion batteries

Enhanced thermal conductivity in copolymerized polyimide

Greatly enhanced thermal conductivity of polyimide composites by polydopamine modification and the 2D-aligned structure

Polyethylene Oxide-Coated Electrospun Polyimide Fibrous Seperator for High-Performance Lithium-Ion Battery

Thermal, Mechanical and Dielectric Properties of Polyimide Composite Films by In-Situ Reduction of Fluorinated Graphene

Comprehensive properties study of polyimide with fluorinated nanofillers

Polyimide nanocomposites for high‐temperature capacitive energy storage applications by incorporating functional graphene oxide nanosheets: Design, preparation, and mechanism

WO3-composited polyimide nanofibrous separator with superior mechanical properties and high capacity for lithium-ion batteries

Preparation and characteristics of composite films with functionalized graphene/polyimide

High temperature polyimide nanocomposites containing two-dimensional nanofillers for improved thermal stability and capacitive energy storage performance