Abstract:Due to the significant selectivity for Cs+, ammonium molybdophosphate (AMP) possesses potential to uptake radiocesium from high-level liquid waste (HLLW), whereas its micro-crystalline structure and fine powder morphology limit its industrial application. Although the granulation method with alginate is prospective for the preparation of an AMP exchanger, the mechanical strength of obtained beads may be insufficient for application. In this context, we prepared silica-reinforced AMP-calcium alginate (ACS) beads and evaluated their performance for Cs+ removal from strong acidic solutions. It was found that the addition of silica in the fabrication significantly improved the mechanical strength of the beads in comparison to those without silica. Notably, the beads with an AMP/silica mass ratio of 1.0 exhibited an exceptional mechanical strength, surpassing that of ACS beads composed of other components. The batch experiment results indicated that the Cs+ adsorption follows a non-linear pseudo-second-order rate equation. The distribution coefficient of Cs+ was high even in extreme acidic conditions (∼1.6 × 102 mL/g in 8.0 mol/L HNO3 solution). The Cs+ adsorption can be well fitted with the Langmuir model, and the estimated maximum exchange capacity in 3.0 mol/L HNO3 could reach 23.9 mg/g. More importantly, ACS beads showed excellent selectivity toward Cs+ uptake over eight co-existing metal ions in simulated HLLW, with separation factor values all above 145. The column experiment exhibited that the beads can serve as the stationary phase in columns to effectively remove Cs+. The findings of this study are significant as they provide insights into the development of efficient materials for radiocesium removal from high-level liquid waste. The results demonstrate the potential of silica-reinforced ACS beads for Cs+ adsorption, with promising applications in industrial settings.

Robust and recyclable sodium carboxymethyl cellulose–ammonium phosphomolybdate composites for cesium removal from wastewater

A comparative study of immobilizing ammonium molybdophosphate onto cellulose microsphere by radiation post-grafting and hybrid grafting for cesium removal

Effective removal of cesium by ammonium molybdophosphate–polyethylene glycol magnetic nanoparticles

Manganese silicate/MoS 2 composite material with high adsorption capacity for the selectively removing Cs + from aqueous solution over a wide pH

Silica-Reinforced AMP-Calcium Alginate Beads for Efficient and Selective Removal of Cesium from a Strong Acidic Medium

A facile synthesis of polyacrylic acid–ammonium phosphomolybdate microspheres for the highly selective removal of cesium

The adsorption of Cs+ from wastewater using lithium-modified montmorillonite caged in calcium alginate beads

A novel chitosan/cellulose phosphonate composite hydrogel for ultrafast and efficient removal of Pb(II) and Cu(II) from wastewater

Fabrication of Graphene Oxide/Ammonium Molybdophosphate Composite Membranes for Decontamination of Cesium Ions from Seawater

Highly-selective and well-effective removal of cesium ions by segregative titanium-ferrocyanide/chitosan melamine sponge composite

Highly selective and easily regenerated porous fibrous composite of PSF-Na2.1Ni0.05Sn2.95S7 for the sustainable removal of cesium from wastewater

Design of amphoteric MOFs-cellulose based composite for wastewater remediation: Adsorption and catalysis

Phosphate-rich cellulose beads for efficient cesium extraction from aqueous solutions: a novel approach for cellulose utilization

Synthesis of hollow mesoporous silica spheres functionalized with copper ferrocyanide and its application for Cs+ removal

Ammonium molybdophosphate functionalized copolymer micelles for efficient Cs+ adsorption

Synthesis and characterization of a new activated carbon supported ammonium molybdophosphate composite and its cesium-selective adsorption properties

Removal of cesium ions using nickel hexacyanoferrates-loaded bacterial cellulose membrane as an effective adsorbent

Effective removal of cesium from wastewater via adsorptive filtration with potassium copper hexacyanoferrate-immobilized and polyethyleneimine-grafted graphene oxide

Simple fabrication of carboxymethyl cellulose and κ-carrageenan composite aerogel with efficient performance in removal of fluoroquinolone antibiotics from water

Metal hexacyanoferrates-based adsorbents for cesium removal

Versatile Poly(Diallyl Dimethyl Ammonium Chloride)-Layered Nanocomposites for Removal of Cesium in Water Purification