Abstract:Little detailed information is available on the alternative of using varying microwave power during drying of food products. Experiments were made to study microwave drying characteristics and dried product quality. A two-stage microwave power system using a first and second stage power input for varying times during drying was used. The study focuses on describing microwave drying characteristics of carrot and discussing the effect of sample thickness, power applied during first-stage (first-stage power), power applied during the second-stage (second-stage power) and duration of first-stage on β-carotene content, and rehydration ratio. The dehydration rate increased and the drying energy consumption decreased, as the thickness of the sample decreased, power level increased and mass load decreased. There were two falling rate periods when using microwave drying of carrot, the first falling rate period being over moisture contents of 1.0 (d.b.), and the second falling rate period applying at moisture contents less than 1.0 (d.b.). The same water loss will consume more energy and the energy curve was shown to the steeper when the moisture content is less than 1.0 (d.b.). Slice thickness, first-stage power, second-stage power, and duration of the first-stage affected β-carotene content and rehydration ratio. The rehydration ratio of the dried products decreased with increase in duration of the first-stage and slice thickness. β-carotene content decreased with increase of power applied during the second-stage and duration of the first-stage. With the exception of the effect of first-stage power on β-carotene content and duration of the first-stage on the two quality indicators, slice thickness, first-stage power, and second-stage power significantly affected the two quality indicators.

The influence of carrot pretreatment, type of carrier and disc speed on the physical and chemical properties of spray-dried carrot juice microcapsules

Effect of osmotic dehydration pretreatment of carrots

Shaping the Physicochemical and Health-Promoting Properties of Carrot Snacks Produced by Microwave-Vacuum Drying with Preliminary Thermal and Enriching Treatment

Texture Changes of High Pressure Processed Fresh-Cut Carrots Combined Pretreatment

Microencapsulated β-carotene preparation using different drying treatments

Investigation on the discoloration of freeze-dried carrots and the color protection by microwave combined with coating pretreatment

α- and β-Carotene Stability During Storage of Microspheres Obtained from Spray-Dried Microencapsulation Technology

Quality of carrot juice as influenced by blanching and sonication treatments

Combined Use of Blanching and Vacuum Impregnation with Trehalose and Green Tea Extract as Pre-treatment to Improve the Quality and Stability of Frozen Carrots

Influence of Sonication and High Hydrostatic Pressure on the Quality of Carrot Juice

Effect of Type and Concentration of Carrier Material on the Encapsulation of Pomegranate Peel Using Spray Drying Method

Effect of high-pressure microfluidization on nutritional quality of carrot (Daucus carota L.) juice

Drying characteristics and drying quality of carrot using a two-stage microwave process

Effects of dynamic high pressure microfluidization on the physical and chemical properties of carrot (Daucus carota L.)

Particle engineering for improved stability and handling properties of carrot concentrate powders using fluidized bed granulation and agglomeration

Microencapsulation of β-Carotene Based on Casein/Guar Gum Blend Using Zeta Potential-Yield Stress Phenomenon: an Approach to Enhance Photo-stability and Retention of Functionality

Microencapsulation of Black Carrot Anthocyanins for Enhanced Thermal Stability

Kinetic Study of Encapsulated β-Carotene Degradation in Dried Systems: A Review

Effects of ultrasound and microwave pretreatments of carrot slices before drying on the color indexes and drying rate

On surface composition and stability of β-carotene microcapsules comprising pea/whey protein complexes by synchrotron-FTIR microspectroscopy

Effect of extrusion process conditions on extrudates enriched with carotenoids encapsulated by different methods using gum arabic and vegetable fat as carriers