Abstract:Highlights A novel application for foods that is not consumed in the season has been developed. Black carrot juice powders could be successfully agglomerated in fluidized beds. Powder properties of agglomerates containing water were as good as others. Fluidized bed agglomeration is important in the creation of easy‐to‐use meals. This study aims to apply fluidized bed agglomeration process performed at 60°C and 1.6 m/s as air temperature and velocity, to improve the powder properties of the black carrot juice powders obtained by spray drying at the inlet and outlet air temperatures of 160 and 100°C, respectively. The binders maltodextrin, gum arabic, whey protein isolate and water were added to the powders at 1:0.1, and 1:0.2 powder/binder solution (BS) ratios. The agglomerates have higher moisture content (11.35%–12.88%, wet basis) and water activity (0.256–0.379) values than the powders (9.18 ± 0.03% and 0.25 ± 0.00, respectively). While the angle of repose value of black carrot juice agglomerates decreased compared to powders, the porosity values (54.17%–66.87%) and the hygroscopic properties were improved. The friability values for the agglomerates were 37.21%–77.04%. The agglomeration process improved the microstructure, glass transition temperature and particle size distribution as determined with scanning electron microscope, differential scanning calorimeter, and laser diffraction method analysis. Practical applications Black carrot is a vegetable with high nutritional value and its consumption is limited to a certain season. For this reason, the production of the powders of vegetable juices and having the agglomerated form of them, an important improvement will be achieved in the production of healthy and easy to use foods for children and adults. Fluidized bed agglomeration which is a novel application is important in the creation of easy‐to‐use meals. Black carrot juice powders could be successfully agglomerated with some different binders in fluidized beds. Powder properties of agglomerates containing water were as good as the binder agents.

Particle engineering for improved stability and handling properties of carrot concentrate powders using fluidized bed granulation and agglomeration

The effect of the fluidized bed agglomeration process on the powder properties of black carrot juice powders

The influence of carrot pretreatment, type of carrier and disc speed on the physical and chemical properties of spray-dried carrot juice microcapsules

Kinetic Study of Encapsulated β-Carotene Degradation in Dried Systems: A Review

Microencapsulated β-carotene preparation using different drying treatments

Effect of extrusion process conditions on extrudates enriched with carotenoids encapsulated by different methods using gum arabic and vegetable fat as carriers

Encapsulation of oil in powder using spray drying and fluidised bed agglomeration

A review of encapsulation of carotenoids using spray drying and freeze drying

Encapsulation of Orange Oil Using Fluidized Bed Granulation

Spray Drying of Casein Aggregates Loaded with β-Carotene: Influences of Acidic Conditions and Storage Time on Surface Structure and Encapsulation Efficiencies

Exploring microencapsulation potential: Multicomponent spray dried delivery systems for improvement of Chlorella vulgaris extract preservation and solubility

On surface composition and stability of β-carotene microcapsules comprising pea/whey protein complexes by synchrotron-FTIR microspectroscopy

A new method for the production of particles with heat-sensitive nutrients by combining low-temperature closed-loop spray drying and natural plant carriers

Gentle Sterilization of Carrot-Based Purees by High-Pressure Thermal Sterilization and Ohmic Heating and Influence on Food Processing Contaminants and Quality Attributes

Development of β-carotene loaded oil-in-water emulsions using mixed biopolymer-particle-surfactant interfaces

Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process

Influences of different carbohydrates as wall material on powder characteristics, encapsulation efficiency, stability and degradation kinetics of microencapsulated lutein by spray drying

Application of the agglomeration process on spinach juice powders obtained using spray drying method

Characterization of Spray-Dried Microcapsules of Paprika Oleoresin Induced by Ultrasound and High-Pressure Homogenization: Physicochemical Properties and Storage Stability

Shaping the Physicochemical and Health-Promoting Properties of Carrot Snacks Produced by Microwave-Vacuum Drying with Preliminary Thermal and Enriching Treatment

A Comparison of Microfluidic-Jet Spray Drying, Two-Fluid Nozzle Spray Drying, and Freeze-Drying for Co-Encapsulating β-Carotene, Lutein, Zeaxanthin, and Fish Oil